ice tec used for sale

Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details.

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - .ucymachines/ Contact us at - sales@ucymachines

Emerson Control Techniques SKB3400150

akvoFloat is a system for wastewater treatment, especially for removing solids and oil from old emulsions and wash water.

- With one labelling station for applying self-adhesive labels - Year of construction: 2002 - Last service: June 2023 - Output: 1700 b/h - Formats: Ø 60/110mm - Direction of rotation: left-right - With variable speed drive - With photo cell at machine exit - With motorised conveyor - Without rotary infeed table - With small rectangular accumulation table - With inkjet printer SOJET for batch number – Year 2022 - In good condition

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Control Techniques, Servo Drive -Type: MAXAX 100/3000 -Input: 1.5 kVA -Output: 1 kW -Number: 2x Servo Drive available -Price: per piece -Dimensions: 275/110/H235 mm -Weight: 2.8 kg/pc.

This 3-axis PHENIX TECHNOLOGIE MD-JET 2040 was manufactured in 2015. It features a working area of 3,000 × 1,500 mm and can cut materials up to 70 mm thick. The machine utilizes a Hypertherm HyPrecision 75S high-pressure pump with a maximum cutting pressure of 4,137 bar. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX TECHNOLOGIE MD-JET 2040 waterjet cutting machine we have for sale. Contact us for further details.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 saw band length: 5850 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,45 t dimensions of the machine ca.: 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effo ...

New part Tecjet 110

This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information.

Temperature range: -60 to 130°C, the control system is defective, including documentation and wiring diagrams, on-site inspection is possible.

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

FILL TECK FTK 400 – Air Bubble Machines (2 pieces available) incl. 7 removal stands Location: 41564 Kaarst-Holzbüttgen Commercial sale. Invoice with VAT will be issued. Delivery and pick-up possible by arrangement. For sale are two used FILL TECK FTK 400 air cushion machines (also known as Fillteck / Sealed Air FillTeck System). The machines produce air cushions (Void Fill) from PE-HD or PA-PE film on site and are ideal for cavity filling and product protection. Technical data (according to nameplate / mount): • Manufacturer: FILL TECK • Model: FTK 400 • Number of units available: 2 • Year of construction: 1× 2007 and 1× 2016 • Voltage: 220 / 230 V • Power: 1.8 kVA | 0.8 kW • Frequency: 50 Hz • Dimensions (approx.): L 1,200 × W 1,000 × H 1,500 mm • Equipment: with reel (approx. 700 × 700 × 1,200 mm) • Special feature: produ ...

X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible.

workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 1250x600 saw band length: 8140x54x1,6 mm band speed: 15 - 90 m/min table height: 855 mm total power requirement: 7,5 kW weight of the machine ca.: 4,96 t dimensions of the machine ca.: 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort  ...

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 500 x 310 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 4250 x 34 x 1,1 mm total power requirement: 2,2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,4 x 2,4 x 1,935 m ACTION PRICE! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all  ...

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 1250x600 mm capacity 45 degrees: round: 680 mm capacity 45 degrees: square: 600 mm capacity 45 degrees: flat: 870x600 mm capacity 60 degrees: round: 580/550 mm capacity 60 degrees: square: 530/450 mm capacity 60 degrees: flat: 550x450 mm saw band length: 8140 x 54 x 1,6 mm band speed: 15 - 90 m/min table height: 855 mm total power requirement: 7,5 kW weight of the machine ca.: 5,3 t dimensions of the machine ca.: 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent N ...

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 capacity 45 degrees: round: 550 mm capacity 45 degrees: square: 550 mm capacity 45 degrees: flat: 550x600 mm capacity 60 degrees: round: 370 mm capacity 60 degrees: square: 370 mm capacity 60 degrees: flat: 370x600/450 mm saw band length: 7260 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent NC contro ...

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mm saw band length: 2455 mm table height: 850 mm cutting width: 245 x 150 mm cutting speed: 45/90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 90 mm : 90 mm : 145 mm Impact energy: 145 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,2 t dimensions: 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8-spindle lathe, Number of spindles: 8

: 900 mm : 900 mm : 900x900 mm saw band length: 9300 x 67 x 1,1 mm table height: 790 mm band speed: 14 - 60 m/min total power requirement: 11 kW weight of the machine ca.: 8,45 t dimensions: 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. ...

!bargain price!

Schütte 32 multi-spindle lathe, completely rebuilt by GWM-Tech, Fanuc AC motors, FANUC motors for threading, PLC, pick-up spindle chuck, bar loader Cucchi Pietro

FRYER, TS TECHNIEK BV, MODEL: HOF-5000x600 Technical description: Serial number: 200939-00124 Power supply: 400 V, 3 Ph, 50 Hz, 3 kW Mesh widht: 600 mm - (Stainless steel) Dimensions: 5000 x 1800 x 2300 mm With internal heating coil

center hole: 2-50 mm workpiece diameter: 8-125 mm workpiece length - min.: 50 mm workpiece length - max.: 1000 mm column - center height: 145 mm grinding wheel speeds:: number: 3 from/to: 13000-45000 U/min spindle turning speed range: 400 U/min dimensions of the machine ca.: 750x850x1800 mm weight of the machine ca.: 475 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Röders TEC RHP 500 was manufactured in 2006. It features a high spindle speed of 42,000 rpm and a tool magazine capacity of 42 slots. The machine is equipped with hydrostatic X, Y & Z axes and includes a coordinate grinding package. If you are looking to get high-quality machining capabilities, consider the Röders TEC RHP 500 vertical machining centre we have for sale. Contact us for further details.

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

CNC control FIDIA with handwheel, travels: X-axis approx. 11,500 mm, Y-axis approx. 1,550 mm, Z-axis approx. 2,250 mm, clamping table length x width x height 2 pieces each approx. 2,000 x 2,000 mm, table load max. 1,000 kg, milling spindle spindle power S1 / S6 approx. 7.4 kW / 12 KW, spindle speed 16,000 rpm, tool holder HSK 50A, B- and C-axis +/- 210° / +/- 104°, Feed speed X, Y, Z axis up to 16 m/min, axis acceleration m/s², machine space requirement approx. 14,000 x 2,600 x 3,650 mm without tables, total weight approx. 13,500 kg; NOTE: Fully functional condition, machine is already dismantled and stored. The machine is already at another location at Kartonstraße 2, D-88255 Baienfurt. Freely loaded FCA D-88255 Baienfurt.

X,Y travel: 14.6" x U,V,Z Travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Motor Drive System AC Servo Motor/Linear Motor Wire Diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb taper angle : ±21°/4.33 inches (DA+DB=0.6 inches) Layout (W x D x H) 90.6" x 89.2" x 80.6

Key data: 3414 mm, 1313 mm, 200 mm

SCM Tech99L Processing

Schneidmaschine mit Rüttler - Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Year 2003 - Serial-No. 211.917 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo + Extraction auger (if needed) available also with hopper+loading screw conveyor, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered RECONDITIONED, price options: as is, checked, lightly reconditioned, totally reconditioned

VIBRO CLASSIFIER FOR GRANULATES, 2 outlets, dimensions : 500 x 1.400 mm., screen holes 8 mm Ø, all parts in contact with water are in AISI304 stainless steel, wheeled supporting structure, complete with connecting plug, machine offered checked for good conditions, total dimensions : 1.900 x 850 x 1.000 kg.300

MG Tech Leanbox Case former Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Manufacturer: Gandra Model: TEC 500+ Year of Manufacture: 2017 Condition: Used Filling Type: Automatic (Hot or Cold Filling) Supported Bag Sizes: 3L, 5L, 10L, 20L Packaging Feed: Bags inserted automatically from a belt or manually Output Capacity: Up to 500 bags/hour (3L capacity) Features: - Vacuum generation - Nitrogen injection after filling - Liter counter and bag counter - Manual removal of filled bags Power Supply: 400 V / 50 Hz Installed Power: 1.5 kW Power Consumption: 2 kW Required Air Pressure: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Infinite Technologies & Robotics Model: SJ2020R0C0001-MP05 Year of Manufacture: 2020 Name of Machine : G2Y Clips Mounting Machine Voltage: 380V Current: 8A Power: 4 kW Weight: 3 Tons Certification: CE marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tilting double miter saw for chair elements with loader TECNOSYSTEM - CE

REF-2650 PILLAR UNIFOILER-U 1kW INDUCTION CAP SEALER Manufacturer: PILLAR TECHNOLOGIES Model: UNIFOILER-U (U5R1002000000) Year: 2008 Induction sealing machine for sealing the foil inside the caps of bottles, jars, etc. Air-cooled Stainless steel design Portable cart with casters Power: 1 kW Voltage: 240 V/8 A/50-60 Hz/1PH Foil seal diameter: max. 120mm Room temperature: max. 40 °C Overall dimensions (mm): 900 x 560 x 1,700 (LxWxH) Sealing head: 126 x 51 mm Adjustable height

1 of used bag-in-box filler, make Technibag, type Sympaty, new 2014. Wired for single phase 230V 50Hz. Set for Vitop bags/taps.

1 of used bag-in-box filler, make Technibag, type Sympaty, new 2014. Wired for 3-phase 400V 50Hz. Set for Vitop bags/taps. With Inoxpa pump and Bürkert Flow 5030 PVDF wheel flow-meter.

TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps