ice tec used for sale

Flake Ice Machine Make: Ice Systems Model: F2 AS 2 TON Flake Ice Machine Built 2018 IN cabinet, with stand

Used, fully functional ice cream maker Maximum capacity: 2.2 liters Ice cream ready in approximately 15 minutes 230 volts Air-cooled

NISSEI FREEZER soft serve ice cream machine Water-cooled 400 volts 2.5 kWh H 150 x W 54 x D 84 cm 250 kg

The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste., Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends., Key Features:, - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway, - Adjustable fill heights and speeds to accommodate tubs from sma ...

51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye

With the Xpress you get a reliable and easy-to-use product with the laser software MARKER, which is adapted to your individual requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. Convince yourself of our Xpress: Make an appointment with us and bring samples of your materials to be processed. We would be happy to introduce you to our Xpress. Laser safety goggles are required for this system. We offer these for spectacle wearers and non-spectacle wearers. Laptop/PC customer provision!

Rex Technologie GmbH vacuum filling machine with lifter for 200 liter meat bins, type: RVF 760, serial number: 74011020712, 400 V, 50/60 Hz, 34,50 A, with Busch vacuum pump, dimensions: 1700 mm x 1300 mm x 2050 mm.

# NEVO 3D / EVO-tech EL-140 (2023) – FDM-Industriedrucker Gebrauchter FDM-3D-Drucker der Marke NEVO 3D / EVO-tech, Modell EL-140, Baujahr 2023. Die Maschine wurde als Händler-Demogerät eingesetzt und befindet sich in einwandfreiem technischem Zustand. Nutzungshistorie Einsatzdauer: Demomaschine Druckjobs gesamt: 180 (Stand Ende Oktober 2025) Materialverbrauch: ca. 2.900 m Filament Geringe Betriebsstunden bei professioneller Wartung Technologie FDM-Verfahren (Fused Deposition Modeling) für industrielle Anwendungen. Das System eignet sich für Prototypenbau, Kleinserien und Funktionsteile. Zustand Einwandfreier technischer Zustand. Alle Komponenten voll funktionsfähig. Regelmäßige Wartung durch Fachpersonal während der Demonutzung. Standort Budapest, Ungarn Eignung Geeignet für Fertigungsbetriebe, Entwicklungsabteilungen und Dienstleister, die einen zuverlässigen FDM-Drucker mit ...

Nevo3D/EVO-tec EL-102 (Baujahr 2022) Industrieller FDM-3D-Drucker aus österreichischer Fertigung, konzipiert für Prototypenbau, Kleinserienfertigung und funktionale Bauteile mit hohen Qualitätsansprüchen. Technische Merkmale: FDM-Technologie mit Dual-Extruder-System für Multimaterial-Druck und lösbare Stützstrukturen Ganzmetallkonstruktion für präzisen Dauerbetrieb und minimale Vibration Geschlossenes Bauvolumen – geeignet für anspruchsvolle technische Materialien Industrietaugliche Mechanik und Steuerung Einsatzbereiche: Prototyping, Kleinserien, Forschung und Entwicklung Zustand: Gebraucht, gepflegt und sofort einsatzbereit. Funktionsfähigkeit gewährleistet. Besichtigung und Testdruck nach Vereinbarung möglich. Standort: Velbert Logistik: Verladung per Stapler vor Ort möglich. Transport im Umkreis von 350 km kann organisiert werden. Die Maschine verbindet österreichisc ...

PostProcess Technologies RADOR – Automatisierte Oberflächenveredelung für additive Fertigung Die PostProcess RADOR aus 2022 ist eine industrielle Nachbearbeitungsmaschine zur automatisierten Oberflächenbehandlung von 3D-gedruckten Bauteilen. Das System ermöglicht reproduzierbare Glättungs- und Entgratungsprozesse ohne manuelle Eingriffe. Technologie und Funktion Die Maschine arbeitet mit der patentierten Suspended Rotational Force (SRF)-Technologie: Bauteile werden in einem geschlossenen System rotierend mit Schleifmedien in Flüssigkeit bearbeitet. Der Prozess ist SPS-gesteuert und gewährleistet gleichmäßige Ergebnisse bei hoher Wiederholgenauigkeit. Kompatibilität Geeignet für Bauteile aus FDM, SLA, SLS, MJF, PolyJet sowie metallbasierten additiven Verfahren. Die RADOR verarbeitet sowohl Kunststoff- als auch Metallteile. Ausstattung Geschlossenes System mit integriertem Fl ...

AMT Technologies PostPro3D – Chemische Glättungsanlage für 3D-gedruckte Thermoplaste Baujahr 2020 | Gebraucht | Standort Europa Diese PostPro3D-Anlage von AMT Technologies ist eine automatisierte Nachbearbeitungslösung zur chemischen Glättung von 3D-gedruckten Bauteilen aus thermoplastischen Polymeren. Die Technologie ermöglicht Oberflächenqualitäten vergleichbar mit Spritzgussteilen und schließt die Lücke zwischen additiver Fertigung und serienreifen Oberflächen. Technische Merkmale: Intelligente, automatisierte Prozessführung Chemisches Glättungsverfahren für Thermoplaste Reproduzierbare Oberflächengüte Geeignet für Serienproduktion Wirtschaftliche Vorteile: Die Anlage reduziert manuelle Nacharbeit erheblich und senkt damit Durchlaufzeiten sowie Betriebs- und Wartungskosten. Für Fertigungsbetriebe, die 3D-gedruckte Teile in größeren Stückzahlen mit hohen Oberfläc ...

Tecnograf ANT250, year: 2010, minimum size: 210 x 145 mm, maximum size: 350 x 420 mm, thickness 2.5 to 45 mm, speed up to 250 cycles per hour, this machine has two glue tanks, 1 kettle for hot melt glue, 1 kettle for PUR glue and PUR cleaning solution

Digital Program Air table Side table right with air Side table left with air Photocell Cutting sanduder 2 knives Unloader BA 7 Still in operation: No Available: immediately

Techno Pack double Clipper DCA E 200 fully automatic coffee machine with hanger loop dispenser Fill caliber up to 65 mm

20pcs new rollers for HEIDELBERG SPEEDMASTER SM102

NEW COOLING TUNNELS BY BAK-TEC for bread, buns, croissant, puff pastry, fish, meat an all other foods etc. available with PVC-belt or stainless steel mesh belt Example: BTI-K 400 -- Working width: 400 mm -- Infeed: 1000 mm -- Outfeed: 1000 mm -- Cooling chamber: 6000 mm -- COPELAND cooling unit 3HP -- complete in stainless steel -- Belt speed: 0-3 m/min. -- Variable speed with inverter -- Belt specification: Food grade PU belt -- Cooling temperature: 0-10 °C -- German CE-confirmation -- 1 year warranty -- with manual book in German / English -- OPTION: -- suitable 400 mm Enrobing machine -- Inspection / Test run and delivery with startup on request -- Leasing business possible -- Publicity prices for SÜDBACK fair 2016 -- Already working for large factories in Germany

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

1 x Alpha Technologies Mooney MV2000e Viscometer software discs and operation manual are included. You will have to register the software. PC not available. In good condition.

Industrial PC or control unit EST. technology consisting of various Flexcommander modules: -EST technology Flexcommander power supply 230V, part No.: 008741 -EST technology Flexcommander disk drive floppy, part No.: 0008740 -EST technology Flexcommander CPU, part No.: 0008734 -EST technology Flexcommander Ethernet, part No.: 0008738 -EST technology Flexcommander SLAVE PROFIBUS DP, part No.: 0008737 - EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 -EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 The Flexcommander modules are older year manufacture and used (see also images). The function was not tested, therefore no guarantee or warranty.

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -> For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

Complete HPLC-MS system Agilent 1200 with single Quad ESI mass-spectrometer 6110 E1M18 foreline pump Edwards G1311A quaternary pump G1329A autosampler G1379B micro vacuum degasser G1316A column oven G1314A variable wavelength UV detector Incl. measuring computer / software Tel: 06721-9886710

Gross volume: 300 ltr. Net volume: 220 ltr. 1 x Head Material: mild steel.

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm

Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new

Pharma Technology DV1300 +VC vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour.

Good day have with this machine a top TECA print up to 4 colours! Carrée and pad cleaning! Absolute Professional machine. If you have questions just email!

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.