8386 offers

maximum number of results exceeded > 1000
please refine your search

Category: 707: catering machines
New in: used
Price: 350 €
Location: Land-de DE 13469 Berlin, Jean-Jaurès-Str. 21
Seller: Dipl.-Ing. O. Saad

Combined spout sink: A) 500x680x1100mm with sensor faucet, control for hot water 490Euro. (C) 500x650x1170mm, 400Euro. (D) 500x700x1000mm, 350Euro. The mismatch? We resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request.

Category: 402: packing machines
New in: 2009
Price: 66.600 EU€
Location: Land-pl PL
Seller: Kennedy Machines

The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device.

Category: 702: breadmaking and confectionery machines
New in: used
Price: 700 €
Location: Land-de DE 13469 Berlin, Jean-Jaurès-Str. 21
Seller: Dipl.-Ing. O. Saad

Download oven by Wiesheu as for price, can also used as spare parts! Elek. Voltage: 380V The mismatch? We resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Drying oven (1x), Make Nabertherm, Type W-1000/H, No 154942, New 1999, Max. temperature 1340 Degr. C., Number of compartments: 1, Capacity 1000 Ltr, Internal width 800mm, Internal depth 1600mm, Internal height 850mm, Electric heating, Electric capacity 75 KW, 400 Volt, Number of doors: 1, With switchgear, Floorspace 2,4x1,6 M, Total height 1,9 M, Weight 2850 KGDRYING OVENSDRYERS > DRYING OVENS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 102: lathes
New in: used
Price: request quote
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

A used three-jaw Chuck for lathe turning machine Chuck diameter approx.: 315 mm Forward approximately: 100 mm Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 107: sheet metal working
New in: 1987
Price: request quote
Location: ab Standort
Seller: Frech GmbH

material width: 0750 mm material thickness: 5,00 mm no. of straightening rolls: 9 diam. of the rolls ca.: 50 mm working direction: rechts - links total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with belt guide in the inlet Trolley at the outlet The price of straightening machine is for the mechanically revised without control cabinet.

Category: 1300: other machines and plants
New in: used
Price: 3.200 €
Location: Land-it IT Brescia
Seller: Mercury Auctions s.r.l.

Machinery workshop and office furniture For sale exclusively next 06th February 2019 at 10:00 o'clock in Cazzago San Martino, Brescia Visit our website or contact us at 030 7751645 to learn more about it and see the lot! Workshop machinery: Disc saw (saw) Palmer mod. Brown 300 MRM matr. 026237 Three workbenches to assemble cylinders Welding area with two welding machines (a TIG CEA Tigtronic 505 and a knitted REHM), wall-mounted pivoting Cap piece, exhaust fan support, a bench with vise, a double wheel Main office furniture: Corner desk, dressers, cabinets, shelves, chairs, various printer and copier. Office: metal drawer units with doors in different materials, archive scanning do ...

Category: 201: saws
New in: 1995
Price: request quote
Location: Land-es ES Spain, 08755 Castellbisbal, Barcelona
Seller: Surplex GmbH

Weight approx.: 4000 kg Dimensions (l x w x h) approx.: 10000 x 2300 x 2000 mm Description: Platform 3800 x 3800 mm 3 bakelite supporting tables automatic lateral lowering device 5 automatic clamps and 2 separators Machine can be delivered during January 2019.

Category: 301: injection moulding machines
New in: 1998
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ANGEL'S 80/30 HL Year of construction: 1998 Injection unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 1150 bar Metering capacity: 49 cc Clamping unit: Clamping force: 30 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 550 x 380 mm Ejector: hydraulic Clamping unit: hydraulic Control: EC 100 Additional equipment: EUROMAP Robot interface Hot channel control Magnetic plate for additional payment Dimensions: Weight: 3200 kg Length/width/height: 3.26 x 1.2 x 1.8 m Drive: Pump/motor: 7.5 kW Heating capacity: 5.9 kW Cylinder heating: 13.4 kW Price: On request

Category: 104: grinding machines
New in: 1989
Price: request quote
Location: Karlsbad Ittersbach Halle 1
Seller: S+B Maschinenhandelsgesellschaft mbH

longitudinal feed:400 mm cross travel:200 mm work height max.:300 mm turning speed range:2800 U/min weight:1050 kg dimensions:1900 x 1200 x Höhe 2250 mm spindle motor:2 kW total power requirement:4,5 kW incl. grinding device ( new ) incl. balancing scale incl. manuals machine no. 372 0790 magnetic plate area 400 mm x 200 mm grinding wheel 225 mm x 25 mm x 51 mm

Category: 301: injection moulding machines
New in: 1991
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ANGEL'S 200/40 Year of construction: 1991 Injection unit: Screw diameter: 30 mm Shot weight: 88 g Injection pressure: 1450 bar Dispensing volume: 99 cc Clamping unit: Clamping force: 40 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 550 x 430 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 90 Additional equipment: Dimensions: Weight: 3000 kg Length/width/height: 3.51 x 1.22 x 1. 90m Drive: Pump/motor: 15 kW Heating capacity: 6.9 kW Total capacity: 21.9 kW Price: On request

Category: 104: grinding machines
New in: 2002
Price: request quote
Location: Karlsbad Ittersbach Halle 1
Seller: S+B Maschinenhandelsgesellschaft mbH

grinding diameter:225 mm grinding length:1000 mm centre height:225 mm control:KELCO120 \"KEL-Varia\" workpiece spindle head::MK 5 grinding spindle drive:10,0 kW spindle speeds:6 - 800 1/min weight of the machine ca.:5,0 t CNC-controlled B-axis, internal grinding device with toolholder dia. 80mm, grinding wheel left 400 x 63 x 127mm, grinding wheel 400 x 50 x 127mm, dressing unit for external and internal grinding wheel, tooling measuring system KEL-Set, passive longitidunal positioning system MOVOMATIC TMP91, paper filter STREULI SAMG-7, chiller STREULI TTK5000, lot of accessories (see picture) new software-update no. 3.94 still in factory for inspection

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel's 200/45 HL-V victory / production line: the machine is integrated with the robots and conveyor belt brand Angel Year of construction: 2002 Injection unit: Screw diameter: 30 mm Injection pressure: 2210 bar Dispensing volume: 99 cc Clamping unit: Clamping force: 45 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 550 x 330 mm Ejector: hydraulic Clamping unit: hydraulic Control: EC 100 Additional equipment: Tie machine EUROMAP Robot interface Air valve x 1 Hydraulic core pulling x 1 Robot Angels ER-HLI Production line: The machine is integrated with the robots and conveyor belt brand Angel Dimensions: Weight: 3300 kg Length/width/height: 3.30 x  ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

lefthand - operation include \r\nhead machine / divider\r\nmoistener + strewer, include\r\ndepositing device \r\n working width 600 mm\r\n max. setting length 2000 mm\r\n variable speed\r\n

Category: 301: injection moulding machines
New in: 1996
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ANGEL'S 200/50 HL Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection pressure: 2000 bar Dispensing volume: 69 cc Clamping unit: Clamping force: 50 t Tie bar distance: 0 x 0 mm Clamping plate sizes: 660 x 560 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Control with hot channels x 8 Air valve x 1 Dimensions: Weight: 4700 kg Length/width/height: 4.04 x 1.29 x 1.96 m Drive: Pump/motor: 15 kW Heating capacity: 6.8 kW Total capacity: 21.8 kW Price: On request

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

Peels, cores and slices apples into slices and punctures the core casing. Put the apple on - turn it on - done!

Category: 301: injection moulding machines
New in: 1995
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel's 330/70 HL / tie machine Year of construction: 1995 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 1600 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 70 t Tie bar distance: Tie machine Clamping plate sizes: 660 x 560 mm Ejector: hydraulic Clamping unit: hydraulic Control: EC 100 Additional equipment: Tie machine EUROMAP Robot interface Control hot-channel x 12 Control air valve Dimensions: Weight: 5300 kg Length/width/height: 6.00 x 1.85 x 2.00 m Drive: Pump/motor: 15 kW Heating capacity: 9.2 kW Cylinder heating: 24.2 kW Price: On request

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

stainless steel, incl. light and filter\r\nwidth 3500 mm, depth 1200 mm, height 400 mm

Category: 104: grinding machines
New in: used
Price: 850 €
Location: Land-de DE 75203 Königsbach-Stein, Bauschlotterstr. 41
Seller: Krail GmbH

Doppelschleifbock, water cooled-Schleifscheibe max Ã? 350 x 50 mm (neuwerig) speed 1400 RPM engine power 1.8 KW 380 Volt L 1050 B 750 H 1250 mm - 79. weight 300 kg

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

dough weights up to 300 g ( 11 oz ) estimation\r\nworking width 300 mm\r\nextra long molding device\r\n

Category: 301: injection moulding machines
New in: 2011
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel e-max 310/100 / electric motor / in perfect technical condition Year of construction: 2011 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2000 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 460 x 410 mm Clamping plate sizes: 650 x 600 mm Ejector: electric Clamping unit: knee lever Control: CC 300 - touch screen Additional equipment: Machine in perfect condition, as new Year of construction: 12.2011, the machine was purchased but in 2012 Machine is completely electric, works very quiet, power-saving High speed machine Steueurng with core pulling Control with Heiskanälen Air valve x 1 Paralle ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

for the depositing of cream, jam and other sandwich mixes\r\ncap. adjustable max. 22 strokes/min. \r\nworking width max. 600 mm, \r\naccessories: \r\n-1 depositing with straight device, 6 rows\r\n-chain with plastic holder 600 x 110 mm on this can be put\r\n biscuits in 6 rows for depositing cream on\r\n

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel victory 330/110 tech with robots Engel ER HLI 41VC / production line Year of construction: 2002 Injection unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dispensing volume: 201 cc Clamping unit: Clamping force: 110 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 790 x 680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Tie machine Production line: The machine is integrated robot guard with the robots and conveyor belt brand Angel, Air valve x 1 Hydraulic core pulling x 1 Injection unit cured - bi Robot Angels ER HLI 41VC Dimensions: Weight: 7300 kg Length/width/height: 5.1 x 1.5 ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

stainless steel, include filter\r\nwidth 1200 mm, depth 800 mm, height 600 mm\r\n

Category: 301: injection moulding machines
New in: 2005
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel victory 330/120 tech with robots Engel ER HLI 41 VCEP5 / production line Year of construction: 2005 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2175 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 tons Tie bar distance: 0 x 0 mm Clamping plate sizes: 740 x 680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Tie machine Production line: The machine is integrated robot guard with the robots and conveyor belt brand Angel, Air valve x 2 Hydraulic core pulling x 1 Injection unit cured - bi Proportional valve on the injection unit - precise injection Robot Angels ER HLI 41 VCEP5  ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

cap. 10 trays/min., for trays width 580 mm\r\ninclude greasing device for the pans

Category: 709: other food machines
New in: used
Price: 1.300 €
Location: Land-de DE 13469 Berlin, Jean-Jaurès-Str. 21
Seller: Dipl.-Ing. O. Saad

BOKU / OFFICINE MARIO DORIN-ITALY, A) Type K 300CS-01 B) Type K 300SB-01 Elek. Voltage: 220 / 380V, elec. Power: 2.2kW. further properties (please see pictures!) Not the right one? We dissolve our warehouse and have very many, cheap offers for equipment in the areas of gastro, restaurant and commercial kitchens, just make an inquiry.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type Allzweck 80, oil lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 2,5 - 10 mm\r\ncapacity 290 slices/min.

Category: 301: injection moulding machines
New in: 1991
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Max. closing force: 10,000kN, distance between tie bars: 1120x1000mm, clamping plate dimensions: 1630x1570mm, screw diameter: 80mm, specific injection pressure: 1800bar, max. injection weight: 1150g, stroke volume: 1600cm³, length: 5300mm, width: 4500mm, weight: 42t, operational hours: ca. 110,000h, including handling system, material conveyor and temperature control devices.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

cap. approx. 5100 pcs./h,\r\ninclude \r\ndivider + rounder, type MUC, 4 rows, \r\n doughweightrange 28 - 95 g\r\n moulding drum 50 - 58 g\r\nintermediate proofer I + II, moulder, roll cutting device,\r\nsetting machine width 600 mm, max. length 1000 mm

Category: 502: presses
New in: 2010
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Presto, type HPK 50 BSK, year of construction 2010, drive power 22 kW, only 7270 operating hours Technical specifications Manufacturer Presto Type HPK 50 BSK Year of construction 2010 Press power 50 t Specific press capacity 65 N/cm² Drive power 22 kW Power input 80 A Hours of operation 7270 Channel cross section 1100 x 700 mm Feed channel dimensions 1050 x 1250 mm Filling volume 0,96 m³ Throughput capacity on idle speed 157 m³/h Cycle time 22 sec. Average throughput rates: Density of 35 kg/m³ 4,4 t/h Density of 60 kg/m³ 6,3 t/h Density of 100 kg/m³ 9,9 t/h Bale weight up to 500 kg, depending on material Tying system 4-fold, fully automated Machine dimensions with ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type 28 M / 50 / oil, lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 2,5 - 10 mm\r\ncapacity 220 slices/min.

Category: 201: saws
New in: 1989
Price: 3.500 €
Location: Land-de DE 58730 Fröndenberg/Ruhr, In der Liethe 1
Seller: Fritz Ernst Maschinenhandel e K

Used saws Internal number: m2658 Manufacturer Altendorf Type F 45 Machine number 77-1-89 Year of construction 1989 Speed 2,870 RPM. Carriage length 3,20 m Blade swivel up to 45 ° Weight 900 kg Engine is reason been overtaken. With test sheet Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarante ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Reactor (1x), Make Hagemann GmbH Beckum, No 88/0093, New 1988, Material stainless steel (1.4439), Capacity 8200 Ltr, Useful capacity 6300 Ltr, Vessel sizes dia. 2000x1800mm, Dished bottom, Dished top side, Manhole dia. 500mm, Top connections (13x), Outlet dia. 100mm, Working pressure vac/3,2 bar, Test pressure 4,2 bar, With jacket (250 Ltr), Working pressure 16 bar, Test pressure 22,1 bar, Max. temperature 200 Degr. C., With anchor stirrer, Motor 17,5 KW, 500 Volt (Ex), Speed mixing shaft variable, Floorspace 2,5x2,5 M, Total height 5,7 MREACTORSREACTORS > REACTORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any  ...

Category: 109: other metal working machines
New in: 1998
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Load capacity: 500kg, turning range: 360°.

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Heilbronn
Seller: Gustav Schönberger GmbH

x-travel: 810 mm y-travel: 610 mm z-travel: 610 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Siemens Sinumerik 810D Shop Mill NC-dividing head electronical handwheel chip tank coolant device Technische Daten / technical details: X-Weg / X-travel 810 mm Y-Weg / Y-travel 610 mm Z-Weg / Z-travel 610 mm Spindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 8000 UpM /rpm Eilgang / rapid feed 24 m/min Tischaufspannfläche / table clamping area 1000x600 mm Werkzeugwechselmagazinplätze / number of tools in changer 24 Antriebleistung Spindel 40/100%ED / drive capacity spindle 40/100%ED 16,5 / 11 kW Gewicht ca. / weig ...

Category: 301: injection moulding machines
New in: 2001
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel's 750/125 HL / tie machine Year of construction: 2001 Injection unit: Screw diameter: 45 mm Shot weight: 287 g Injection pressure: 1760 bar Metering capacity: 318 cc Clamping unit: Clamping force: 125 t Tie bar distance: 0x0mm Clamping plate sizes: 740 x 700 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: EUROMAP Robot interface Air valve x 1 Hardened Spritzaggragt - bimetal Dimensions: Weight: 9200 kg Length/width/height: 5.31 x 1.67 x 2.19 m Drive: Pump/motor: 22 kW Heating capacity: 12.3 kW Total capacity: 34.3 kW Price: On request

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 130 x 430 x 150 mm Description: Jaw width 125 mm, clamping width 190 mm, in 4 detends

Category: 301: injection moulding machines
New in: 2005
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel E-motion 440/180 / Elektrsiche machine Year of construction: 2005 Injection unit: Screw diameter: 40 mm Injection pressure: 1930 bar Dispensing volume: 220 cc Clamping unit: Clamping force: 180 tonnes Tie bar distance: 0 x 0 mm Clamping plate sizes: 970 x 750 mm Ejector: hydraulic Clamping unit: knee lever Control: EC 200 - touch screen Additional equipment: Tie machine Electrically driven machine with Servomotoeren; energy-saving, hochtoruge and quiet Control with hydraulic core pulling Control hot-channel x 24 Injection unit cured - bi Central lubrication system The integrated system for quality control of pressure by Mark Kistler - control of tool pressur ...

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 1.300 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 850 kg Dimensions (l x w x h) approx.: 700 x 900 x 1800 mm Description: Speed range in 4 steps each steplessly adjustable 65 to 240, 130 to 480, 240 to 875 and 480 to 1750 rpm table 620 x 470 mm spindle stroke 160 mm with footswitch for tapping machine vice jaw width 120 mm

Category: 301: injection moulding machines
New in: 2004
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

De MAG Ergotech extra 350-80 Year of construction: 2004 Injection unit: Screw diameter: 25 mm Shot weight: 48 g / PS Injection pressure: 1590 bar Dispensing volume: 54 cc Clamping unit: Clamping force: to 35. Clear width between columns: 280x280mm Tool clamping plate sizes: 410 x 410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC IV Additional equipment: Hot channel control Air valve x 1 Built-in printer used to print the machine store Dimensions and weights: Weight: 2550 kg Length/width/height: 3.2 x 1.3 x 1.8 m Price: On request

Category: 205: boring mills, machining centers
New in: 2006
Price: request quote
Location: Land-ch CH Switzerland, 1637 Charmey
Seller: Surplex GmbH

serial number: 4080 Weight approx.: 12000 kg control: Siemens/ CMS Typ CMS4080EL Dimensions (l x w x h) approx.: 19800 x 2500 x 2750 mm c-axis: ja / yes (+/- 270 Grad) setting measure approx (l x w x h): 9763 x 6102 x 3100 mm working length x-axis: 5600 mm working width y-axis: 1500 mm main spindle: 12/15 (HSK 63/F) kW tool changer: 48-fach/48-fold vacuum pump: 2x 245/300 cbm/h drilling head vertical x-axis: - piece drilling head vertical y-axis: - piece drilling head horizontal x-axis: - piece drilling head horizontal y-axis: - piece saw unit: - changing unit: - nein / no edge gluing unit: - travelling way X-axis: 5600 mm travelling way Y-axis: 2350 mm travelling way Z-axis: 720 mm path-fee ...

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

De MAG Ergotech El Exis E 60-200 / electric machine Year of construction: 2002 Injection unit: Screw diameter: 30 mm Shot weight: 100 g Injection pressure: 1911 bar Dispensing volume: 106 cc Clamping unit: Clamping force: 60 t Tie bar distance: 370 x 370 mm Clamping plate sizes: 600 x 600 mm Ejector: electric Clamping unit: knee lever Control: NC 4 Additional equipment: The high-speed, energy-saving and quiet working machine EUROMAP 12 Robot interface Hydraulic core pulling x 1 Air valve x 2 Injection unit cured - bi Central lubrication system Parallel movements Dimensions: Weight: 6500 kg Length/width/height: 4.2 x 1.4 x 1.9 m Price: On request

Category: 101: boring mills and machining centers
New in: 1974
Price: used machinery auction RESALE 1.650 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 950 kg Dimensions (l x w x h) approx.: 950 x 1000 x 2000 mm Description: Speed range in 2 steps: 132 to 1500 and 400 to 4500 rpm with installed thread cutting device and fine depth adjustment including mounted cross recess, travel 280 x 200 mm spindle stroke 110 mm with accessories

Category: 301: injection moulding machines
New in: 1994
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech compact 1000-430 / machine in excellent technical condition Built in 1994 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2020 bar Dispensing volume: 231. 2cc Clamping unit: Clamping force: 100 t Tie bar distance: 400 x 400 mm Size of the clamping plates: 580 x 590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC 4 Additional equipment: Machine in excellent technical condition EUROMAP Robot interface Core move x 1 Air valve x 2 Clamping unit on two piston Flash card reader Machine integrated manipulator with original Demag Dimensions: Weight: 4200 kg Length/width/height: 4.2 x 1.4 x 1.9 m Drive: Pum ...

Category: 104: grinding machines
New in: used
Price: used machinery auction RESALE 240 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 250 kg Dimensions (l x w x h) approx.: 2060 x 650 x 1500 mm Description: 3 devices mounted on assembly table 1 x Tool grinding unit KAINDL BS.G 60 machine number 88108 with grinding disc max. 200 mm, width 40 mm 1 x Milling cutter grinding machine FEIN SO/64 in accessory cabinet collets movement range: rough movement of the dividing head carriers on pipe guide 100 mm Fine adjustment of the pipe guide with dividing head carrier 15 mm swivel dividing head carrier in horizontal swivel bearing 90° grinding spindle height from pipe guide center to grinding spindle center 140 mm cup wheel 100 x 50 x 20 mm hardness J, grain size 80 Circumferential speed 24 m/s 1 x Grinding spind ...

Category: 301: injection moulding machines
New in: 1996
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech compact 1000-310 with robots by the mark Wittmann Built in 1996 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2020 bar Dispensing volume: 168. 3ccm Clamping unit: Clamping force: 100 t Tie bar distance: 400 x 400 mm Size of the clamping plates: 580 x 590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC 4 Additional equipment: EUROMAP Robot interface Core move x 1 Control air valve Hot channel control Dimensions: Weight: 4200 kg Length/width/height: 4.2 x 1.4 x 1.9 m Drive: Pump/motor: 18.5 kW Heating capacity: 9.4 kW Cylinder heating: 27.9 kW Price: On request

Category: 103: milling machines
New in: 1979
Price: used machinery auction RESALE 4.200 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 1200 x 1200 x 1900 mm Description: Speed range 25 to 2500 rpm tool holder standard cone 40 table longitudinal movement motor-operated 390 mm, manual 400 mm headstock cross movement motor-operated 210 mm, manual 220 mm support vertical movement motor-operated 340 mm, manual 350 mm vertical milling head movable on headstock manually 150 mm table with 7 clamping grooves clamping surface 330 x 700 mm with hydraulic machine vice jaw width 125 mm including tool cabinet with accessories

Category: 301: injection moulding machines
New in: 2000
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech system 3500-840 Year of construction: 2000 Injection unit: Screw diameter: 45 mm Shot weight: 320 g Injection pressure: 2402 bar Dispensing volume: 358 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720 x 650 mm Size of the clamping plates: 1040 x 950 mm Ejector: hydraulic Clamping unit: knee lever Control: NC 4 Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Injection unit made of bimetal Parallel movements Central lubrication system Built-in printer to print out the machine history Auto tool installation height It is possible to change the injection unit for a larger injection unit with screw diameter 50 mm, ...

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 60 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1500 mm Description: Travel length between 500 and 600 mm, pneumatically controlled, serves for automatic removal of sprues on injection moulding machines, YOM 2007 & 2008

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)