ice cream machine used for sale

NISSEI FREEZER soft serve ice cream machine Water-cooled 400 volts 2.5 kWh H 150 x W 54 x D 84 cm 250 kg

Used, fully functional ice cream maker Maximum capacity: 2.2 liters Ice cream ready in approximately 15 minutes 230 volts Air-cooled

The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste., Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends., Key Features:, - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway, - Adjustable fill heights and speeds to accommodate tubs from sma ...

Flake Ice Machine Make: Ice Systems Model: F2 AS 2 TON Flake Ice Machine Built 2018 IN cabinet, with stand

Sideloader ICEM GTE 20/502-4 d Four way forklift Strength 12500 kg Forks 800 mm Masch. No. 17346 Lifting height mm 5020 Height 2300 mm Free stroke 1200 mm Electric motor Batteries good Battery charger available Built in 2005 Weight without battery 2000 kg L x W x H: 240 x 180 x 220 cm The machine is in perfect condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Icecream Homogenizer YOM 1996 Only used for 1 year 160l/h, 180 bar Very good condition

Parker ICE 360, chiller Find more here - / Contact us at -

Two identical Renova cooling units with Frascold compressors are available. Connected load: 19.6kW, cooling capacity: 38.6kW, temperature range: 0°C to +45°C, refrigerant: R449A, machine dimensions X/Y/Z: approx. 1500mm/2300mm/1500mm, weight: approx. 520kg. Documentation available. On-site inspection is possible.

51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye

Bakon cream blower Type: Top Cream 530 Year of construction: 2011 Stainless steel digital control Temperature indicators 1.5kW As good as new condition Height: 115cm Width: 50cm Depth: 64cm

Hagesana Cream King SE 2 Cream Machine Type: Cream King SE 2 - With stainless steel boiler - Mobile on castors - 230 volts Boiler interior dimensions: - Diameter: 45cm - Interior height: 55cm

Cream Machine Hagesana Manufacturer : Hagesana Type : Cream-King Year 2007 with Refrigeration Baker Condition Details see picture

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

Height=1.44 m, Overall length= 1.15 m, Overall width= 2.6 m, Net weight= 98 kg,

A line for filling and packaging creams: 1. Inpucker for jars , type: FES201, producer: Groninger, year:2009 2. filler plus 1 mobile hopper, type: DFV 4005, producer: Groninger, year: 2005 3. Capper, type: MCS202L, producer: Groninger, year: 2005 4. Unscrambler cap, type:ZSK1200 ,producer: Groninger, year: 2008 5. Container and Elevator cap, type: DE120, producer: Groninger, year: 1994 6. Labelling cap, type: Gamma, producer: Promark, year: 2010 7. Depucker, type: Omikron, producer: Promark, year: 2010 8. Labelling base label,type: Gamma, producer: Promark, year: 2010 9. Labelling wrap label,type: Gamma, producer: Promark, year: 2010 10. Printer, type: Smart DateX10, producer:Markem, year: 2008 11. Inpucker, type: Paxinpacker, producer: Unilogo, year: 2010 12. Cartoning machine, type:AVV, producer: CAM, year: 2009 13. Mechanical turning  carton, Festo, year: 2011  ...

pasteurizer for cream efficiency: 7500 l/h GEA plate heat exchanger valves and pumps : ALva Laval flow meters -Endress + Hauser Offer details and photos will be sent to the email.

Dairy Machinery UK officially offers E-SPIN Dairy Centrifuges In the regions of United Kingdom ,Ireland and Greece. We offer sales, installation, maintenance and stock holding of spare parts for quick response to all of our customers. Whenever it is necessary to separate liquids or remove ultra-fine particles, and when traditional filtration methods reach their performance limits, disk stack centrifuges are exactly what you need to achieve the best results…. Trailblazing designs, consistent and innovative research, superior materials and complete sharing of expertise, thanks to a lean and flexible structure: these are the key ingredients in our approach. They allow us to focus directly on our most important objective: maximum machine efficiency performance and total satisfaction for you. Al components are manuractured to the highest quality and safety standards.  ...

Description GEA Westfalia Cream Separator MSE 75-01-177[tel:75-01-177] , this machine is used for cream separation and clarification of milk. This machine has been purchased new in 2004 by a very well know dairy keeping the service contracts and condition of there machines in place. The machine has been working until 2024 December. Technical Details Make : GEA Westfalia Model : MSE 75-01-177[tel:75-01-177] Year of Manufacture: 2004 Serial Number : 1723-725 Usage : Cream Separator Capacity : 7500 L/h full skimming Capacity : 10,000 L/h Clarification Full Skimming : 0.01% Tools : Included Controls : Included Condition : Good

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

full line for mesh up to 6 m

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

Koppens breading machine Belt width: 600mm Power: 0.12 kW

Sieving machine

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg

Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)