hydraulic punching machine used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 110 mm -Type: unfortunately without type designation -Piston rod: Ø 18 mm -Hole: Ø 13/16 mm / Distance: retracted 470 mm -Dimensions: Ø 65 x 500 mm -Weight: 5.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 30 mm / Distance: retracted 430 mm -Dimensions: Ø 70 x 495 mm -Weight: 8.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 75 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Holes: Ø mm / Distance: retracted 340 mm -Dimensions: 400/90/H130 mm -Weight: 9.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 63 mm -Type: unfortunately without type designation -Piston rod: Ø 28 mm -Holes: Ø 40 mm / Distance: retracted 320 mm -Dimensions: Ø 88 x 400 mm -Weight: 8.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 160 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm / M20 -Holes: Ø 25 mm -Dimensions: Ø 70 x 410 mm -Weight: 6.4 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 185 mm -Piston rod: Ø 20 mm / M20 -Dimensions: 475/110/H65 mm -Weight: 4.5 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type 0510 525 311 -Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer Sundstrand, hydraulic unit -Hydraulic pump: type TFP100/3.8 D CO 01 LAB F/40 -Motor: Dietz 1.5 kW 2850 rpm -Dimensions: 400/220/H165 mm -Weight: 15.5 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Danfoss, hydraulic motor -Type: OMP 50 151-0020 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 12x aggregate available -Price: per piece -Dimensions: 190/130/H125 mm -Weight: 5.9 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: Baumann, hydraulic tank from electric forklift EVS 25/14 -Contents: Ltr. -Dimensions: 380/125/130 mm -Weight: 5 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 50/50 -Stamp diameter: 112 mm -Pressure: max. 450 bar -Lifting capacity: 50 t -Dimensions: 220/160/H220 mm -Weight: 19 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 50/50 -Stamp diameter: 110 mm -Lifting capacity: 50 t -Dimensions: 220/165/H220 mm -Weight: 19.5 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 009 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 150/125/H120 mm -Weight: 3.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 1 517 222 492 -Shaft: Ø 16 / 17 x 8 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 116/90/H120 mm -Weight: 2.7 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, Char-Lynn hydraulic motor -Type: MAE 140 740-0140-140-007 -Shaft: Ø 31x 50 mm -Dimensions: 260/133/H130 mm -Weight: 13.9 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Passage: Ø 34 mm -Hole: Short cone 6 cone Ø 103-106 mm -Thread: M40 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 195 mm -Weight: 23.7 kg

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Parker, hydraulic pump -Type: 730-0080 000-064 -Drive shaft: Ø 22 x 35 mm - universally applicable -Hole: Ø 13 mm / Spacing 106 mm -Dimensions: 233/133/H135 mm -Weight: 13.1 kg

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 560 mm -Piston rod: Ø 25 mm -Mounting: Bolt circle Ø 100 x 9 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 790/118/H150 mm -Weight: 11 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 200 mm -Piston rod: Ø 20 mm -Mounting: Bolt circle Ø 85 x 8 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 440/104/H123 mm -Weight: 8.5 kg/pc.

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece -Dimensions: Ø 83 x 500 mm -Weight: 9.3 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 250 mm -Piston rod: Ø 25 mm -Hole: Ø 25/19 mm -Pitch spacing: retracted 465 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 530/60/H73 mm -Weight: 5.9 kg/pc.

Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 24 mm -Piston tube outer diameter: Ø 86 mm -Stroke: 290 mm -Number: 2 cylinders available Price: per piece -Weight per piece: 12 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request

hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 80 bar -Liter flow rate: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Hydraulic motor, oil motor, hydraulic pump Model No.: 013.44186 -Toothed shaft mounting: Ø 44 mm -Dimensions: 470/260/320 mm -Weight: 130 kg

radial piston motor, hydraulic motor, oil motor, hydraulic pump -Shaft mounting: Ø 63 mm -Number: 1x motor available -Price: per piece -Recess recording: 314 mm -Dimensions: 550/460/460 mm -Weight per motor: 190 kg

Hydraulic motor, oil motor, hydraulic pump -Model Type: MF100 -Toothed shaft mounting: Ø 40 mm -Quantity: 2 available Price: per piece -Dimensions: 430/240/200 mm -Weight: 50 kg/piece