137,514 used machines on RESALE, but how to find them? Machine Search
pressure: 40 t stroke: 150 mm serial number: 100091 : 2 : Druck & Hub verstellbar pressure: 25 t weight: je 1,5 t safety light frame: ja bei beiden The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine.
Hydraulic press manufactured in 2001. This AMADAs SCHIAVI HFB 220-40 features a robust 4000 x 220 Tons capacity and includes advanced safety features such as side and rear guards, and photocells that comply with regulations. With a use and maintenance manual provided, this refurbished machine is CE compliant. Consider the opportunity to buy this AMADAs SCHIAVI HFB 220-40 hydraulic press. Contact us for further details.
This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, its ideal for precise bending operations. Contact us for more information about this machine.
Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.
Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.
DHS-200 – 200 T Hydraulic Heating Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a hydraulic heating press DHS-200 with a pressing force of 200 T and an extendable sliding table system. The machine has heating plates ranging in size from 800 × 800 mm, an open height of 800 mm and a hydraulic stroke of 600 mm, and is particularly suitable for laminating, forming and thermal pressing processes with temperature-controlled tools. Technical data + information: Hydraulic Heating Press DHS-200 – 200 T General information - Type: Hydraulic heating press with sliding table - Pressing force: 200 t - Usable area table: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (WxDxH): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg ...
Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.
LASCO FP 222 S hydraulic press was built in Germany by Lasco Umformtechnik GmbH. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO FP 222 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex components used in the broadly defined automotive or machinery industry. Its main application is hot and cold forging. The use of a die cushio in the lower work table and the large slider stroke means that the machine can also be used as a deep drawing press. All machining processes are performed with a high press force of up to 200 tonnes, which, combined with the highly dynamic slider, guarantees the b ...
LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...
A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.
Key data: 200 t, 80 mm
Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg
Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg
Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg
Hydraulic press, single column press, C-column press, oil hydraulic press, hydraulic single column press, press machine, hydraulic punch for Schüco tools hydraulic press, multifunctional punch, punch, universal punch, punching machine -Hydraulic press: Hydraulic single-column press with stops on both sides -Pressing force: 15 tons -Hydraulic unit: 220 bar stroke: 25 mm -Hole: Ø 28 mm -Projection: 100 mm -Operation: foot pedal -Installation dimensions: 2575/800/H1350 mm -Transport dimensions: 1260/800/H1350 mm -Weight: 223 kg
Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg
Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg
Key data: 300 t, 2 mm, 600 mm
Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm
Key data: 40 t, 450 mm, 160 mm
Press force 400 kN , table 450x560 , ram 375x300 , distance table joints 340 stroke 160 , puncture hole 100 diameter, silky column passage 220x410
This 3-axis SXKH HMG-300JM hydraulic press was manufactured in 2014. It features a substantial table dimension of 2200 x 1800 mm and a weight capacity of 36000 kg. The machine operates with a forward speed of up to 4200 mm/min and has a power rating of 30 kW. If you are looking to get high-quality pressing capabilities, consider the SXKH HMG-300JM machine we have for sale. Contact us for further details.
pressure: 150 t stroke: mm distance between table / ram: 660 mm table surface area: 1500 x 610 mm table height over floor: mm diameter of seal: 150 mm range L-W-H: 1,7 x 1,5 x 2,3 m weight of the machine ca.: t C-frame press - hole in table Ø 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details.
Key data: 30 t
DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...
Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton
A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible.
Key data: 250 t, 800 mm, 650 mm
LCM Taiwan, 250 tons hydraulic press Possible to inspect under power New in 2014 Table 800x800 mm Stroke 0-650 adjustable
Key data: 600 t, 800 mm, 650 mm
LCM Taiwan, 600 tons hydraulic press New in 12/2014 Table 800x800 mm Stroke 0-650 mm adjustable full specifications attached Possible to inspect under power
Key data: 400 t, 1000 mm
LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Possible to inspect under power
Key data: 300 t, 600 mm, 400 mm
OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Stroke 400 mm Possible to inspect under power
Key data: 300 t, 800 mm, 500 mm
HURSAN 300 tons hydraulic press Year of manufacturing 2021 Table 800x800 mm Stroke 500 mm Possible to inspect under power
Manufacturer: Winter Model: VSP 350 Year of Manufacture: 2014 72015 Type of Machine :Column press Technical Specifications : - Plunger force can withstand 3500 kN - Maintain 50 mm plunger stroke - Piston force: 2500 kN - Piston stroke: 100 mm - Installation height of plunger at the top: 553 mm - Distance between columns 570 mm - Table-type pestle surface WD 392238 mm - Table height approx. 1100 mm - Overall height approx. 3250 mm - Overall width approx. 1290 mm - Total depth approx. 860 mm - Machine weight without oil: approx. 13000 kg - Oil filling DIN 51524-HLP 46 1150 l - Maintain working speed of 500 kN at approximately 30 mm/s - Maintain working speed of 3500 kN at approximately 4 mm/s - Maintain return stroke speed of approximately 60 mm/s - Working speed for cutting: 500 kN approx. 30 mm/s - Working speed for cutting: 2500 kN approx. 5 mm/s - Return stroke speed: approximatel ...
Hydraulic Press for Diamond Cutting Disc 60phi500phi Plate Furnace Medium Pressure Forming Machine Instruction Manual 1988.6.25 Kyodo Seiki Co., Ltd. Postal:211 518-4 Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa, Japan TEL: 044(544)6925 FAX: 044-541-3546 1. Machine Specifications 1) Maximum Output: 60,000 kg 2) Max Output Pressure: 150 kg/cm² 3) Effective Stroke: 250 mm 4) Furnace Dimensions: - Horizontal Side: 8kw × 2 - Rear Side (With Door): 8kw 24kw 5) Heating Temperature: 860°C 6) Internal Dimensions: W650 mm × N 450 mm ×D 750 mm 7) Power Input: - Main Pump: 2.2 kW × 4 pole - Auxiliary Pump: 0.4 kW × 4 pole 8) Oil Tank Capacity: 120 L (ISO.VG32-56 equivalent hydraulic oil) 9) Temperature Control: Silister P.I.D Control 10) Vacuum: 4-stage 415V - 50Hz 2. Machine Installation 1) Install the press body on a flat surface. Secure it with anchor bolts if possi ...
pressure: 30 t stroke: 300 mm daylight between the columns: 700 mm dayligth: 850 mm : 140 mm diameter of piston: 60 mm table surface area: 700 x 390 mm weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bed Size:Left to Right 393mm 15.5 in Front to Back 393mm 15.5 in Daylight Between Tables 559mm 22 in Daylight Between Heated Platens 353mm 13.9 in Heating Electrical Induction Heated Platen Sizes(Up To) 355mm x 355mm 14″x14″ Max Working Platen Temperature 220°C Main Ram Stroke(Up To) 355mm 14 in Hydraulic Circuit Pressure 70 Bars 1000 PSI Main Ram Pressing Force 41 T 40 Ton Main Ram pull back 2.2 T 2.2 Ton Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s
Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details.
Hydraulic press manufactured in 2015. This WINTER VSP 350 features a holding force of 3500 kN and a trimming force of 2500 kN. It offers a holding stroke of 50 mm and a trimming stroke of 100 mm, ensuring efficient operation. With a robust table size of 1290 x 1200 mm, this machine is designed for heavy-duty tasks. If you are looking to get high-quality pressing capabilities, consider the WINTER VSP 350 hydraulic press we have for sale. Contact us for further details.
Qty. 1 Second-hand Aluminium Extrusion Press Line Mfc.: Youngstown USA Force: 1650 MT Billet dia.: 6”, 152 mm Built: early 1980s, completely Revamped in 1999 Production start: 1999 Stopped: 2025, but still under power Billet size: 6”, 152 x 550 mm Press Type: Horizontal Hydraulic, Direct Extrusion PLC: LS XGK (Korea) Required floor space: 20 mtrs x 60 mtrs
NC HYDRAULIC SIMPLE PRESS BRAKE NOMINAL FORCE: 3000KN WORKTABLE LENGTH: 5000MM POLES DISTANCE: 3800MM THROAT DEPTH: 400MM STROKE: 300MM MAX OPEN: 600MM POWER: 45KW DIMENSION: 5000MM(L) X 2500MM(W) X 3200MM(L) LOCATION: F39, TGE KINDLY CONTACT: syweetopglove.com.my
Key data: 250 t
Press force: 2500 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm (1200 x 630 mm) Plunger: 750 x 450 mm (900 x 550 mm) Projection: 360 mm Speed from: 200 mm Speed on: 110 mm Height of the machine: approx. 3,600 mm Weight: approx. 9,000 kg Connection: 20.5 kW Machine can be sold in original condition or overhauled with current UVV
Key data: 160 t
Press force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Plunger: 750 x 450 mm Projection: 360 mm Speed from: 200 mm Speed on: 125 mm Height of the machine: approx. 3,450 mm Weight: approx. 7,000 kg Connection: 17 kW Machine can be sold in original condition or overhauled with current UVV
PRESS FORCES total force (nominal): 1000 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1300 mm SLIDE stroke: 500 mm
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 46131
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 32510
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to SLIDE EJECTOR / CUSHION stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 47037
CONTROLS PLC SIEMENS SIMATIC PANEL PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 400 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1300 mm SLIDE stroke: 700 mm DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1100 mm Machine hours: 14060
CONTROLS conventional PRESS FORCES total force (nominal): 160 to PRESS TABLE table surface (left-right): 1000 mm table surface (front-back): 850 mm SLIDE stroke: 705 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1205 mm Machine hours: 78571
Key data: 315 t, 310 mm, 250 mm
Condition used Press capacity 315 t Stroke 250 mm Daylight 310 mm Table size (left to right) 320 mm Table size (front to back) 385 mm Table height 1250 mm Speed at max. press force 7.5 mm/sec Pressure speed at f max. 0.3 mm/sec Return speed 24 mm/sec Oil quantity 390 l Driving power 380 V/ 50 Hz/ 2.2 kW Dimensions 1950 x 800 x 2000 mm Height of machine above floor 2000 mm Total weight 2.4 t Mode of operation oil hydraulic Calibrating presses Description Contact the seller for more information Interested in this machine?
Hydraulic briquetting press manufactured by UMP Technika, model BP-600A, designed for the compaction of biomass and various industrial by-products in high-density briquettes. It offers a production of up to 600 briquettes/hour and a maximum compaction pressure of 1,700 kg/cm², to process product with a maximum humidity of 15% and produce briquettes of 150 x 60 mm (base) x 40-105 mm (adjustable height). The machine works continuously and automatically, and incorporates an electrical panel with Siemens PLC, frequency inverter and hydraulic group. Technical characteristics Model BP-600A Year of manufacture 2017 Power supply 33kW 400 V 50 Hz Production 600 Kg/h Documentation Maintenance Manual Operation Manual Electrical diagrams In your state
pressure: 6,3 t throat: 200 mm stroke: 200 mm dayligth: 600 mm total power requirement: 2,2 kW weight of the machine ca.: 0,78 t dimensions of the machine ca.: - m Hydraulic Press 63 kN Stroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg. Workspace: Table 450 x 380 Drive: 2.2 Movie: https://www.youtube.com/watch?v=tcxXfKlrFLY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
