hydraulic press brake used for sale

7 assen: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada-bombardement Capacity: 125 ton x 3100 mm Backgauge: CNC Control: Delem DA65R Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Length: 3245 mm Depth: 1940 mm Height: 2415 mm Weight: 7,7 ton

3 assen: Y1 / Y2 / X Capacity: 220 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 3500 mm Depth: 1900 mm Height: 2700 mm Weight: 10,5 ton

Key data: 630 t, 275 mm

For sale is a used lowering press, manufacturer Sack + Kiesselbach, type EP 630. The machine is in very good condition. The press worked in an engraving company as a test press. Technical data: Pressing force: max. 630 tons. Installation height: max. 325 mm Stroke: max. 275 mm Weight: 4,000 kg

SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min  &nbs ...

Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 190 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 1750 mm Height: 2850 mm Weight: 12 ton

Key data: 300 t, 800 mm

Hydraulic Press Emanuel 300 ton Year of construction: 1989 Dimension table: 1600 x 1300 mm Light max: 1130 mm Light min: 350 mm Slide stroke: 800 mm Cushion stroke: 400 mm Side upright clearance: 640 mm

Hydraulic Press Emanuel 500 ton press Year of construction: 1976 Dimension table: 2500 x 1900 mm Light max: 1490 mm Light min: 550 mm Slide stroke: 940 mm Cushion stroke: 400 mm Side upright clearance: 900 mm

Hydraulic Press MURARO 500 ton Year of construction: 2001 Dimension table: 2600 x 1600 mm Dimension lower table: 2700 x 1600 mm Light max: 1500 mm Light min: 700 mm Slide stroke: 900 mm Cushion stroke: 400 mm Side upright clearance: 770

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

Key data: 600 t

Max Tool length: 3000mm Max Tool Width: 2000mm Min Tool Height: 500mm Total Tool Weight: 20,000kg Max Closing Speed: 400 mm/sec

Haco PPM 175 ton x 3600 mm Capacity: 175 ton x 3600 mm Backgauge: electric Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

Key data: 250 t, 100 mm

Heavy-duty cylinder with two-stage pump Type SB -2504 - RO Series 365 Pressure 250 ton

pressure: 1000 t distance between columns: - mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: 8 t multiple images available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: max. 630 tons. Installation height: 375 mm Stroke: 275 mm Weight: 4,500 kg.

Press force: 1,250 tons. Clear width: 585 mm Installation height: max. 480 mm Piston stroke: max. 355 mm Weight: 7,200 kg.

Thermoforming press Jochnick & Norrmans 150/ton upper cylinder 100 Ton Lower Cylinder Table 1000x1000mm Built in 1973 New electrical cabinet in 1998 With light screen and wiring diagram Now in stock Price is freely loaded

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES   total force (nominal): 650 to PRESS TABLE   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm SLIDE   slide force: 630 to   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm   stroke: 1000 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 7 mm/s   working velocity max.: 15 mm/s   return velocity max.: 120 mm/s   return force: 65 to DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   c ...

RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   openings in uprights: yes PRESS FORCES   total force (nominal): 350 to PRESS TABLE   table surface (left-right): 1600 mm   table surface (front-back): 1400 mm SLIDE   stroke: 1200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 250 mm/s   working velocity min.: 14 mm/s   working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 1250 mm   distance between columns (H-frame): 1650 mm   passline opening (free passage in side columns): 630 mm ELECTRICAL SPECIFICATIONS   total power consumption: 60 kW DIMENSIONS / WEIGHTS   height above floor level: 4300 mm   height under floor level: 1000 mm   total weight approx.: 2400 ...

CONTROLS   electronic controls SIEMENS S5 PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided   openings in uprights: yes   table cushion: yes   opening in table: yes PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 710 mm   table surface (front-back): 560 mm SLIDE   slide force: 100 to   table surface (left-right): 560 mm   table surface (front-back): 450 mm   spigot hole diameter: 50 mm   stroke: 320 mm   thickness of bolster plate: 150 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 340 mm/s   working velocity max.: 32 mm/s   return velocity max.: 330 mm/s SLIDE EJECTOR / CUSHION   stroke: 40 mm DIE CUSHION (TABLE CUSHION)   ...

pressure: 20 t weight of the machine ca.: 590 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE   total force (nominal): 400 to   stroke: 200 mm COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   shut height max.: 420 mm   passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 12 mm   feed velocity max.: 30 m/min   feedstock transport direction: right to left LEVELLER UNIT   sheet width max.: 500 mm   sheet width (mi ...

4 assen: Y1 / Y2 / X / V Laserbeveiliging voor en achter Capacity: 250 ton x 4100 mm Backgauge: CNC Control: Cadman Touch-B Passage between uprights: 3150 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 350 mm Table width: 250 mm Locking speed: 80 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 30 kW Length: 5545 mm Depth: 1990 mm Height: 3380 mm Weight: 23 ton

CONTROLS   PLC PRESS DESIGN   drive system: hydraulic   quick die change system: yes SLIDE   total force (nominal): 450 to   stroke: 230 mm SLIDE (HYDR. PRESS)   working velocity min.: 5 mm/s   working velocity max.: 70 mm/s   return velocity max.: 200 mm/s   return force: 200 to V-RING   nominal force: 200 to TOOL DIMENSIONS   lower table (left-right): 790 mm   lower table (front-back): 760 mm OVERALL SPECIFICATIONS (COIL LINES)   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to STRIP-FEEDER   feeder type: roll feeder   band lubrication system: yes ELECTRICAL SPECIFICATIONS   total power consumption: 150 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS    ...

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...

Hydraulic press JAM HYP-505H in very good condition for sale Manufacturer: JAM Model No.: HYP-505H Year of Make: 1990 Compressive force: 50 kN (5 t) Stroke length: 150 mm Working height: 385 mm Table size: 400 × 340 mm Punching hole: Ø 25 × 60 mm Ram speed: 260 mm/s Fpobmrjwin Emecu Idjb Ram speed: 39 mm/s Plunger return speed: 360 mm/s Pressure range: 7.7 MPa Safety light barriers Two-handed operation Voltage: 3-phase, 200 V, 1.5 kW, 10 A Weight: 400 kg Operating oil: 25 litres Height (mm): 1070 Width (mm): 670 Length (mm): 1060

pressure: 30.0 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7.5 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 3.0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side -  ...

pressure: 60.0 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 4.0 mm/sec return speed: 10.0 mm/sec engine output: 4.0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the s ...

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...

Haco ERM 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 5050 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 330 mm Locking speed: 80 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 22,5 kW Length: 6500 mm Depth: 1980 mm Height: 3700 mm Weight: 33 ton

Hydraulic Press DEGUMA P12-12 II

Bending press ITALPRESSE mod. PHF 60 - CE rules - Platens dim. mm. 1600X1100 - N. 4 cylinders - Max opening 1000 - Motors max 1.5 kw - Volt. 380/50 - Year 2001

This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information.

This 5-axis LVD PPEB 110/30 Press Brake was manufactured in 2001. It offers robust performance for precision bending operations. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 110/30 machine we have for sale. Contact us for more information about this machine.

This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.

This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.

This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours.

This HIDROLIKSAN PH4C 200T hydraulic press was manufactured in 2015. It features a robust press force of 200 tons and a large table measuring 1800x1400 mm, ideal for various pressing applications. Consider the opportunity to buy this HIDROLIKSAN PH4C 200T hydraulic press. Contact us for more information.

This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information.

This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine.

This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), its CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information.

This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine.

PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 2200 mm   table surface (front-back): 1700 mm SLIDE   stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6536 mm   space requirements -front/back-: 2923 mm   total height: 6135 mm   total weight approx.: 36000 kg

Dear Sirs, We are pleased to offer the following Used Open Die Forging Press, manufactured by Kawasaki (Japan), a well-known and reputable Japanese OEM. EQUIPMENT OVERVIEW Equipment: Open Die Forging PressManufacturer: Kawasaki (Japan) Manufacturing Year: 2012 Condition: Used, in production until May 2025 Application: Forging of rings and heavy forged components The press owner supplied forged parts (mainly rings) for power plant applications to leading OEMs such as Mitsubishi, Toshiba, GE, Hitachi, Fuji, etc. TECHNICAL SPECIFICATIONS General Press Capacity: 2,000 ton System Pressure: 30.0 MPa Pulling Capacity: 1,000 kN (100 ton) at 19.5 MPa Number of Cylinders: 3 Main Cylinder Diameter: 796 mm Press Weight: Approx. 130 ton Stroke & Daylight Stroke: 1,500 mm Daylight: 2,300 mm Table Fixed Table Size: 1,650 mm (R.L) × 2,400 mm (F.B)  ...

pressure: 40 t stroke: 150 mm serial number: 100091 : 2 : Druck & Hub verstellbar pressure: 25 t weight: je 1,5 t safety light frame: ja bei beiden The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 060 t stroke: 350 mm table surface area: 750x344 mm dayligth: 197/750 mm distance between columns: 750 mm diameter of piston: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESS FORCES   total force (nominal): 600 to PRESS TABLE   table surface (left-right): 3070 mm   table surface (front-back): 1530 mm SLIDE   stroke: 305 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 296 mm/s   return velocity max.: 380 mm/s TOOL ASSEMBLY DIMENSIONS   passline opening (free passage in side columns): 1220 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 4250 mm   space requirements -front/back-: 2100 mm   total height: 5700 mm