hydraulic press 250 used for sale

upper amp; lower Wila tooling 5 axes: X / X´ / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Backgauge: CNC Control: TS3 Passage between uprights: 2550 mm Max stroke: 265 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 9 kW Length: 3400 mm Depth: 1850 mm Height: 2820 mm Weight: 5 ton

Key data: 600 t

Max Tool length: 3000mm Max Tool Width: 2000mm Min Tool Height: 500mm Total Tool Weight: 20,000kg Max Closing Speed: 400 mm/sec

Haco PPM 175 ton x 3600 mm Capacity: 175 ton x 3600 mm Backgauge: electric Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

pressure: 30 t throat: 250 mm table-size: 650 x 500 mm stroke: 400 mm dayligth: min. 120 / max. 500 mm Control: Simatic HMI Touch Siemens total power requirement: 13 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1850x1500x1230 mm Weight: 870 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x1170x1510 mm Weight: 650 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x1600x1500 mm Weight: 1550 kg Total power requirement: 11,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1800x1800x1900 mm Weight: 3000 kg Total power requirement: 33,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: max. 630 tons. Installation height: 375 mm Stroke: 275 mm Weight: 4,500 kg.

Press force: 1,250 tons. Clear width: 585 mm Installation height: max. 480 mm Piston stroke: max. 355 mm Weight: 7,200 kg.

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   openings in uprights: yes PRESS FORCES   total force (nominal): 350 to PRESS TABLE   table surface (left-right): 1600 mm   table surface (front-back): 1400 mm SLIDE   stroke: 1200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 250 mm/s   working velocity min.: 14 mm/s   working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 1250 mm   distance between columns (H-frame): 1650 mm   passline opening (free passage in side columns): 630 mm ELECTRICAL SPECIFICATIONS   total power consumption: 60 kW DIMENSIONS / WEIGHTS   height above floor level: 4300 mm   height under floor level: 1000 mm   total weight approx.: 24000 kg ATTACHMENTS (PRESSES)   European CE standards: yes

RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 710 mm   table surface (front-back): 560 mm SLIDE   slide force: 100 to   table surface (left-right): 560 mm   table surface (front-back): 450 mm   spigot hole diameter: 50 mm   stroke: 320 mm   thickness of bolster plate: 150 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 340 mm/s   working velocity max.: 32 mm/s   return velocity max.: 330 mm/s SLIDE EJECTOR / CUSHION   nominal force: 2 to   stroke: 40 mm DIE CUSHION (TABLE CUSHION)   cushion force: 10 to   stroke: 80 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 455 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 300 mm   sheet t ...

pressure: 20 t weight of the machine ca.: 590 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press JAM HYP-505H in very good condition for sale Manufacturer: JAM Model No.: HYP-505H Year of Make: 1990 Compressive force: 50 kN (5 t) Stroke length: 150 mm Working height: 385 mm Table size: 400 × 340 mm Punching hole: Ø 25 × 60 mm Ram speed: 260 mm/s Fpobmrjwin Emecu Idjb Ram speed: 39 mm/s Plunger return speed: 360 mm/s Pressure range: 7.7 MPa Safety light barriers Two-handed operation Voltage: 3-phase, 200 V, 1.5 kW, 10 A Weight: 400 kg Operating oil: 25 litres Height (mm): 1070 Width (mm): 670 Length (mm): 1060

Haco ERM 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 5050 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 330 mm Locking speed: 80 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 22,5 kW Length: 6500 mm Depth: 1980 mm Height: 3700 mm Weight: 33 ton

Hydraulic Press DEGUMA P12-12 II

Bending press ITALPRESSE mod. PHF 60 - CE rules - Platens dim. mm. 1600X1100 - N. 4 cylinders - Max opening 1000 - Motors max 1.5 kw - Volt. 380/50 - Year 2001

This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information.

This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.

This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours.

This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.

This HIDROLIKSAN PH4C 200T hydraulic press was manufactured in 2015. It features a robust press force of 200 tons and a large table measuring 1800x1400 mm, ideal for various pressing applications. Consider the opportunity to buy this HIDROLIKSAN PH4C 200T hydraulic press. Contact us for more information.

This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information.

This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine.

This 5-axis LVD PPEB 110/30 Press Brake was manufactured in 2001. It offers robust performance for precision bending operations. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 110/30 machine we have for sale. Contact us for more information about this machine.

pressure: 40 t stroke: 150 mm serial number: 100091 : 2 : Druck & Hub verstellbar pressure: 25 t weight: je 1,5 t safety light frame: ja bei beiden The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LVD PPNMZ 1200 ton x 12 meter CNC Capacity: 1200 ton x 12 meter Backgauge: CNC Passage between uprights: 5050 mm Max stroke: 300 mm Max distance between table -- ram: 600 mm Depth of throat: 350 mm Table width: 300 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 46 mm/sec Electric motor (power): 44 kW

8 assen: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 4 plaatsteunen aan de voorkant laserveilige beveiliging Willa gereedschap Capacity: 220 ton x 6100 mm Backgauge: CNC Control: Cadman-B Touch Passage between uprights: 5050 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Weight: 24 ton

12 assen: Y1 / Y2 / X1 / X2 / X3 / R1 / R2 / R3 / Z1 / Z2 / Z3 / V 5 plaatsteunen aan de voorkant Willa hydraulische gereedschapsadapter 3 achteraanslageenheden Achteraanslagbereik: 1250 mm Capacity: 400 ton x 7100 mm Backgauge: CNC Control: Cadman Passage between uprights: 6050 mm Max stroke: 300 mm Max distance between table -- ram: 550 mm Depth of throat: 300 mm Table width: 250 mm Locking speed: 90 mm/sec Working speed: 9,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 37kW Weight: 38 ton

Trumpf TrumaBend V230 8 assen: Y1 / Y2 / X / R / Z1 / Z2 / V / W bovenste en onderste Willa hydraulische gereedschappen met Trumpf ACB-optie; hoekmeetsysteem 3 beweegbare plaatsteunen aan de voorzijde veel gereedschappen inbegrepen Capacity: 230 ton x 3100 mm Backgauge: CNC Control: Delem Passage between uprights: 2690 mm Max stroke: 365 mm Max distance between table -- ram: 535 mm Depth of throat: 410 mm Table width: 200 mm Locking speed: 200 mm/sec Working speed: 1 > 10 mm/sec Returning speed: 135 mm/sec Electric motor (power): 30 kW Length: 3660 mm Depth: 2120 mm Height: 3095 mm Weight: 17,7 ton

met handmatige kroon Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 hp Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 2,4 ton

Hydraulic press manufactured in 2001. This AMADAs SCHIAVI HFB 220-40 features a robust 4000 x 220 Tons capacity and includes advanced safety features such as side and rear guards, and photocells that comply with regulations. With a use and maintenance manual provided, this refurbished machine is CE compliant. Consider the opportunity to buy this AMADAs SCHIAVI HFB 220-40 hydraulic press. Contact us for further details.

Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Control: AMNC-PC Touch Passage between uprights: 3760 mm Max ...

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

DHS-200 – 200 T Hydraulic Heating Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a hydraulic heating press DHS-200 with a pressing force of 200 T and an extendable sliding table system. The machine has heating plates ranging in size from 800 × 800 mm, an open height of 800 mm and a hydraulic stroke of 600 mm, and is particularly suitable for laminating, forming and thermal pressing processes with temperature-controlled tools. Technical data + information: Hydraulic Heating Press DHS-200 – 200 T General information - Type: Hydraulic heating press with sliding table - Pressing force: 200 t - Usable area table: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (WxDxH): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg ...

Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.

3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

LASCO FP 222 S hydraulic press was built in Germany by Lasco Umformtechnik GmbH. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO FP 222 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex components used in the broadly defined automotive or machinery industry. Its main application is hot and cold forging. The use of a die cushio in the lower work table and the large slider stroke means that the machine can also be used as a deep drawing press. All machining processes are performed with a high press force of up to 200 tonnes, which, combined with the highly dynamic slider, guarantees the b ...

LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg