We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,570 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power
used
Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.
new
Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m
used
used
used
Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER
used
Fresenius MCM 550 ST Infusomat with drop sensor valid STK Ready for immediate use You will receive a VAT invoice.
used
Y-travel: 500mm, z-travel: 450mm, including measuring probes and documentation, software is faulty, machine cannot be started properly.
used
Connected load: 5.5kW, length: 1400mm, width: 1400mm, height: 600mm.
used
There are two identical positive displacement pumps available, rotational speed: 320/min, power: 1.1kW, year of construction machine 1/2: 2015/2019, with Frequency Converter NORD SK 200E-111, Seal Supply System EagleBurgmann QFT2000 and spare parts, machine 1 has a steel construction.
used
Size: 350 x 500 mm Equipments: ST-CV SPF-30 VAC-100a Tower ST-40 ACF-30 VAC-100c Tower
used
Conveyor belt, trough conveyor, trough conveyor probably GASUS type FB 400 x 5500 Belt conveyor, conveyor belt, belt conveyor Fabrig No: F-02071168 Year of construction 1996 Usable length: 5.5 meters Belt width: 400 mm Deflection roller diameter: 225 mm Pulley width: 450 mm Belt speed: approx. 30 meters /min. Motor power: 1.5 kW Mains connection: 400 volts, 50 Hz - Drive via tubular motor - inlet hopper 600 x 400 mm - The support stations are recessed in 2 parts- Metal rollers with maintenance-free ball bearings - Band tension adjustable via threaded spindles- Rubber conveyor belt smooth - stable tubular frame made of steel - cover plate can be dismantled via conveyor belt- for horizontal or slightly rising transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg good condition; used
new
Rexroth Pneumatik 002 27992 Handle Lever 3621719050 , LIPS , BRUNVOLL CONTROL PANELS ARE IN STOCK AND CAN BE SUPPLIED. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
new
cutting diameter: 550 mm saw band length: 6850 x 41 mm cutting width: 1,3 mm Control: Halbautomatisch Cutting area - square: 550 x 550 mm Cutting area - flat: 550 x 700 mm total power requirement: 4 kW / 1580 Nm kW weight of the machine ca.: 3775 kg dimensions of the machine ca.: 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cutting machine EBA 550 Year of construction 2007
new
plate width: 900 mm plate depth: 600 mm plate height: 55 mm weight: 55 kg dimensions of the machine ca.: 900 x 600 x 50 mm Clamping plates - T-slot plates - Plate field 900 x 600 x 55 mm If you have not found the size you need, you can also send us an e-mail send us an e-mail with the filled PDF form. With this we can an individually manufactured plate for you. Number of grooves: 3 edge distance: 140 mm groove spacing: 270 mm groove width: 14 mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III 20x on stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Carriage length: 3200 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 200 mm; Scorer: no; Height adjustment of saw blade: motorized; Swivel adjustment of saw blade: motorized; Adjustment of width stop: manual; Saw blade swivel range: 0Â to 45Â; Display saw blade angle: digital; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 11 kW; Engine braking: yes / automatic; Suction connection: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Made in Italy
new
cutting diameter: 570 mm saw band length: 7250 x 41 mm cutting width: 1,3 mm capacity 90 degrees: square: 550 x 550 mm capacity 90 degrees: flat: 550 x 700 mm total power requirement: 4 kW weight of the machine ca.: 6050 kg required space: 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for o ...
used
Technical data for the pallet rack stand: Shelving system: Hovuma The scope of delivery includes: 01x pallet rack stand, used Material color: green Profile credit: 70 x 40 x 10 x 4.0 mm Profile type: C 704 S 235 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 5,570 mm high 870 mm deep
used
2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 550/975, year 2001 and 1989, capacity each 20 Kg, autoclave diameter 550 mm, The 2 machines are delivered with total 2 bobbin carriers with 4 swords each, each word has a useful loading height 975 mm, add vessel on each machine, the 2 machines share the same electrical cabinet which was supplied by LORIS BELLINI in 2001
new
turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Projection: 550 mm Cuts 350 x 13 mm or 230 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, so that punching and shearing can be carried out independently Assortment of tools is included in the price
used
Name: Glass cutter Type: Silver cut No. 550.0 Manufacturer: Bohle-Werkzeugfabrik Condition: used Components: - 1 x base cross (complete with 2 x suction cup, base rail, cross rail) - 4 x clamping piece with suction cup - 4 x extension rail 100 mm - 2 x extension rail 200 mm - 1 x cutting ruler - 1 x slider for small ellipses - 1 x slider for large ellipses - 1 x silver cut glass cutter no. 425.1 with ball-bearing wheel carrier Note: There are no 400 mm extension rails included! Application: - for circular and elliptical cut-outs made of glass plates Original price: 380,00 € tax excl. Price: 239,00 € (VB) plus VAT ex location Grunow (Brandenburg) (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted. ...
used
We offer refrigerating unit with 4pcs compressor. 1 compressor with frequency controller VACON. Cooling capacity with -10C evaporating temperature and +42C condensation temp. >100KW . 2014 year manufacturer.
new
Speed control unit GAC-ESD5550 3 pieces available, 1x with original packaging, 2x without
used
Espresso coffee machine portafilter WMF 03.5500 Year: 12. 2016 - WMF espresso coffee machine - two integrated mills - automatic tampering - Air-cooled bean containers - Type: 03.5500 - 380-415 volts - 6.0 - 7.0 kW - 3/N/PE - 50/60 Hz
used
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor and stops on request
new
Weibert WBBS 555 profi Log band saw The log band saw is intended exclusively for sawing soft, hard, dry and frozen materials, logs or prismatic workpieces. Their length depends on the design of the machine. The material is laid on the supports of the railway path and fastened. The sawing unit is fed manually. Max. trunk diameter 555mm Max. board width 530mm Max. saw blade stroke 540mm Min saw band stroke 20mm Max. cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Impeller-D: 400mm Wheel width: 25mm Saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed. 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-555 Optional: Extension section 2.3m Aspirator Swivel bar
new
Carriage length: 3200 mm; Cutting width at width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 200 mm; Pre-scorer: yes; Height adjustment saw blade: handwheel; Saw blade swivel adjustment: handwheel; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display Cutting Height: Scala; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 550mm; Speeds: 2800 / 3660 / 4800 rpm; Engine power: 7.5 kW; Engine braking: yes / automatic; Suction connection: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Saw blade inclination and height adjustment is done manually Max. cutting height 200mm scoring device with separate drive motor main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with materi ...
used
horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg
used
Year of manufacture: 1994 Engine: 4-stroke gasoline engine, Robin EY D Gear change: Forward and reverse gears Cutter bar: Municipal cutter bar with double blade mower deck Mowing width: 1200 mm Tires: Twin tires Machine can be tested at our warehouse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sliding carriage length: 3200 mm; cutting width with rip fence: 1450 mm; cutting width at the cross cut: 3200 mm; cutting height 90°: 200 mm; cutting height 45°: 140 mm; scoring unit: yes; height adjustment: motorized; tilt adjustment: motorized; rip fence adjustment: motorized; display saw blade tilt: digital; display saw blade height: digital; display rip fence: digital; display crosscut: digital; saw blade diameter: 550 mm; saw blade speed: 2800 / 3665 / 4800 ; motor power: 7,5 kW; motor brake: yes / automatically; suction connection: 80 mm und 120 mm; machine length: 3400 mm; machine width: 3700 mm; machine height: 1330 mm; weight: 1300 kg; Hanging control panel with Siemens control and 10 large touch display Control of saw blade height/tilt and positioning of the rip fence via the control panel Max. Cutting height 200mm Pre-scoring device with separate d ...
new
Carriage length: 3200 mm; Cutting width at width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 200 mm; Pre-scorer: yes; Height adjustment of saw blade: motorized; Swivel adjustment of saw blade: motorized; Adjustment of width stop: manual; Display saw blade angle: digital; Display cutting height: digital; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7.5 kW; Engine braking: yes / automatic; Suction connection: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Stable steel-cast iron construction Large contact surfaces due to standard table extension and widening cast iron saw table Fold-down rip fence with fine adjustment and round rod guide cut-to-length fence, extendable up to 3200 mm, with two folding stops Laterally ...
new
sliding carriage length: 3200 mm; cutting width with rip fence: 1450 mm; cutting width at the cross cut: 3200 mm; cutting height 90°: 200 mm; cutting height 45°: 140 mm; scoring unit: yes; heigh adjustment: motorized; tilt adjustment: motorized; rip fence adjustment: manual; display saw blade tilt: digital; display saw blade height: digital; display rip fence: digital; display crosscut: scala; saw blade diameter: 550 mm; saw blade speed: 2800 / 3665 / 4800 ; motor power: 7,5 kW; motor brake: yes / automatically; suction connection: 80 mm und 120 mm; machine length: 3400 mm; machine width: 3700 mm; machine height: 1330 mm; weight: 1100 kg; Saw blade tilt and height adjustment motorized and with digital display. Max. cutting height 200mm scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ High dead weigh ...
used
MESSER OMNIMAT TD 5500 (2008) Width 5.500 mm x 45 M; Thickness 3-50 mm; Operating Panel Position: Right side; Cutting speed: 0~6,000mm/min, Marking Speed max. 18,000 mm/min, Rapid speed:24,000mm/min (2008) Rail: Span: 5.5M; L: 45M Accessories/other items: -Water cooler, power supply, panel box, transformer, air compressor, circuit breaker and cable rail. -With Cutting table Cutting table dimension: W: 4.5M; L:43M; H: 550mm -Steel plate bucket Make MESSER Model OMNIMAT TD 5500 Year 2008
used
Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg
new
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 16-320A Engine No.: in production Power: 481 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 D Gene. No.: in production Generator power: 550 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.900 Height approx. mm: 2.550 Leng ...
used
verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen
used
AVAILABLE FROM THE END OF AUGUST 2023 3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-100a - Gathering tower VAC-100m - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-100a / Horizon VAC-100m / VAC-100m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50/60Hz - 1,86kW - ...
used
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 551,400 mm Number of fields / row of shelves: 149 pcs á 3,600 mm Number of levels plus floor level: 02 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Pallet spaces per row of racks: 1,788 pcs. Total pallet spaces per row of racks: 1,788 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 800 kg The scope of delivery includes: 150x pallet racking stand, used Material colour: grey Frame profile: PLFB155 Profile dimensions: P 100 x 68 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed tru ...
used
Scrubbing machine, floor cleaning machine, mopping machine -Scrubbing machine with drive -Working width: 850 mm -Pract. Area performance: 2860 m2 / h -Charger -with drive -Special suction cup guarantees maximum suction power at low costs.
new
Key data: 400 , 500 , 400
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 10V1600G20F-3B Engine No.: on request Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 / Diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 D Gene. No.: in production Generator power: 550 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.060 Height approx. mm: 2 ...
used
Used continuous cutter TIPPER TIE ALPINA, type: TTChop 55V El. Connection: 3x 400 V, 50 Hz, 380 / 500 / 555 A, 10 kA, 212 kW, 150 bar Net weight: 7,800 kg Further information on request.
used
3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-60a (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-60a / Horizon VAC-60m / VAC-60m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50 ...
used
Angle welder with conveyor belt
used
Refrigerator, Fabr. Liebherr, Type MRFvc 5501, 544 l
used
Key data: 60 mm, 1600 mm
Specifications: - Drilling capacity 60 mm - Projection 1600 mm - Drilling spindle mount MK 5 - Drilling spindle stroke 390 mm - Spindle speeds, 20 steps 20 - 2000 rpm - Clockwise and counterclockwise rotation - Feed, 12 steps 0.056 - 2.5 mm/rev - Drive 400 V / 12.8 kW - Electromechanical clamping of the boom and drilling unit - Distance between machined machine bed – drill quill - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - Coolant device - Dice table - Space requirement approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg
used
x-travel: 800 mm y-travel: 1020 mm z-travel: 970 mm Control: HEIDENHAIN iTNC 530 : 18000 min/-1 Feeds (X,z,u,w-axis): 29 / 39 kW tool taper: HSK 63 : 60 Pos. rapid travel x/y/z: 65/50/80 mm/min table diameter: 630 x 630 mm table load capacity: 700 kg max. workpiece diameter: 900 mm A-Axis: -185 / +45 ° b-axis: 360 ° total power requirement: 42 kVA weight of the machine ca.: 22 t dimensions of the machine ca.: m 5-axis BAZ Equipped with: - CNC control HEIDENHAIN iTNC 530 - pallet changer 2-fold (630x630mm) - tool changer 60-fold (HSK-A63) - Swivel rotary table (A-/B-axis) - IKZ 4-38 bar - chip conveyor - belt filter system - spindle cooling 6 Machines available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...
used
Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Fram ...