hsc 55 used for sale

We offer for sale 2 Jenbacher cogeneration plants, type: JW312GSB. Motors are of the manufacturer of Stamford. Performance: 675 KVA. Both units are complete. One is easily broken. Hours of operation: approx. 55000 and 28000 At the operational unit, the generator was replaced and overhauled.

Hydraulic fork positioner 550-2000 mm Fork positioner hydraulically by 550-2000 mm, Stacker, has been in use at 2.5 to can be mounted but on any truck, mast, front loader, etc, with integral Sideshift. Adapter plate with mount slots for cultivation. Dimensions available upon request. Adapter plate surface area approx. 715 x 650 mm. Valve block hydraulic pump can be supplied. Sale and mistakes are expressly reserved. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

2 piece "Backlog from series production" Capacity: 330 kVA / 264 kW plus 10% overload Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-353 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: 550 l Switchgear / Starter: automatic switchgear for parallel operation Battery voltage / capacity: 24 V / 2 x 143 Ah Ggenerator switch: Yes Power switch: No Automatic: Yes - Kuhse Accessories: weather protection cover, Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm

TURNING ANGLE: 180°, BILLET SIZE: QUADRATE: MAX. 240 MM, SQUARE: MAX. 210 x 250 MM, U & I FORM: MAX. 400 MM, WEIGHT: MAX. 5500 KG,

used membrane chamber filter press / filter press Passavant Noggerath 1200 x 1200 frame size: K1200 / 110 format of the filter records: 1200x1200 execution: unanimously (filtrate derivation by a collective management) material of the filter records: PP material of the membrane records: PP number of the filter chambers: 100 max. / 33 strength of the filter cake: 30 mms mix pack filtration surface: 230 max. / 76m? filtration volumes: 2985 max. / 985 litres filtration pressure in the chambers: 8 cash max. pressure under the membrane: 15 cash max. temperature with filtration: 20 °C max. material of the filter cloth: PP working pressure in the hydraulic cylinder: 400 cash max. dimension of the chamber filter press: Length: 9,786 mms, width: 2,550 mms, height 2,100 mms weight of the chamber filter press without mud: 18,210 kg of MAX hydraulic oil: OH-HM 32  ...

Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F

Engel hose pouring machine type: 3550/700 duet with Robo control: Construction year CC100: In 1997 Schliesseinheit Schliesskraft t: 700 opening ways mm: 1200 cross-beam measure mm: 1025 x 935 installation heights min / max. mm: 550/ record size: 1570 x 1470 hose unity snail diameter mm: 80 hose weights gr: In 1770 hose volumes cm?: in 1960 hose pressure cash: In 1730/2030 mass and weights dimensions LxBxH m: 9.2 x 3 x 2.67 machine weights kg: 30.000/10.000 other Neureder Robot system

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds:  ...

Cat.-No. 16-00152 in a very good condition Measurement and Weight: Total Length: 7200 mm Cyl.Length approx. 6000 mm Diameter: 2400 mm Weight: approx. 4.550 kg Uni 6450 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Tank lining: EMS 227 Operating temperature -10/+50°C Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 9 mm wall thickness. Tank upper body: · 1 flange DN 25 Tank front: · with manhole oval up front 430 x 350 mm swivelling with holder · with pressure valve with manometer, with overpressure safety valve, connection DN 15 · with temperature sensor · with level indicator flanged 100 mm · with clear outlet with angle seat valve DN 50 flanged 135 mm · with agitator (380V 1,1 kW, 1400 U/min 50 Hz) flanged NW 150 mm · with rest outlet DN 50 with an ...

PLASMA Suction and filtration system FILTERBLOC - TFK PL Series Special central suction and filter system for plasma smoke when burning and cutting the FILTERBLOC TFK PL series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE drawing FILTERBLOC - TFK PLASMA 40/60/80 engine power 5.5/7.5/11 KW air volume 4000/5500/6200 m3/h filter area 124/186/248 m2 Dusting area 4x/6x/8x 84 liters Automatic jet cleaning system with welding smoke class W3 24 months warranty The price information refers to the TFK PL 40 naehere information on request; ready to use

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

FOR SALE SULZER ASV 25/30 ENGINE NEW GENUINE SPARE PARTS AT TURKEY HAVE A GOOD DAY SIR. WE HAVE MANY NEW GENUINE SPARE PARTS OF SULZER ASV 25/30 ENGINE AT OUR STOCK. WE VE 200 ITEMS AT OUR STOCK. PLS FIND 100 ITEMS WITH PARTS NUMBER ON BELOW. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US.. NO. ONE - SULZER 12 ASV 25/30 PART NO. 1 NEW CYLINDER LINER 5001001 1 PCS 2 NEW PISTON 3404001 4 PCS 3 NEW CAM SHAFT SECTION 10107001 3 PCS 4 NEW COMPLETE LUBRICATION PUMP 30004 K 1 PCS 5 RECON CONNECTING ROD 1 PC 6 NEW LOWER CRANK BEARING D = 225 MM 02103 B 7 PAIRS 7 NEW UPER CRANK BEARING D = 225 M 02103A 7 PAIRS 8 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 9 NEW THRUST BEARING HELPED 2103001 2 PAIRS 10 NEW BOLT WITH OVERSIZE 701007/0VERSIZE 12 PCS 11 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 12 NEW BEARING SHELL HELPED D = 194.5MM 03004B 511200- ...

Anew ex works! Hydraulics - membrane pump Abel HMD-G-80-1000 long construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

SUB: FOR SALE... NEW & RECON ORIGINAL PARTS L 48/60 AT STOCK HAVE A GDY SIR; WE'VE MANY NEW OR RECON SPARE PARTS OF MAN L 48/60 AT OUR STOCK. PLS FIND DTLS AT BELOW. MOST OF THEM SUPLIED FROM YOU IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. 1 NEW CYLINDER LINER X 1105003-7519 1 YOU 2 RECON EXHAUST VALVE 1140441 D 449216 1 3 RECON EXHAUST VALVE 11408100120560 1 5 RECON EXHAUST VALVE 114071002050560 1 6 RECON EXHAUST VALVE 1140441144 1 7 RECON EXHAUST VALVE 114071000960560 1 8 RECON EXHAUST VALVE 114061002560560 1 9 RECON EXHAUST VALVE 114091003053060 1 10 RECON EXHAUST VALVE 114071009960560 1 11 RECON EXHAUST VALVE 114091000500560 1 12 RECON EXHAUST VALVE 114071000950560 1 13 RECON EXHAUST VALVE 11406102640560 1 14 RECON EXHAUST VALVE 11408100120560 1 15 RECON EXHAUST VALVE 61953016796 1 16 RECON EXHAUST VALVE 6051953004859 1 17 RECON INLET VALVE 01 ...

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Used membrane chamber filter press / filter press Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 15 times !

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

- Arbeitsbereich X - Achse 1100 mm - Arbeitsbereich Y - Achse 1800 mm - Arbeitsbereich Z - Achse 240 mm - 2 Drehsupporte inklusive 3-Backenfutter - max. Werkstückdurchmesser 400 mm - max. Werkstücklänge 1000 mm - max. Werkstück Gewicht 56 kg - Arbeitsgenauigkeit -+0,04/300 mm - stabiler Arbeitstisch höhenverstellbar 700 mm, belastbar bis 1500 kg - Max. Verfahrgeschwindigkeit 5500 mm/min - Max. Graviergeschwindigkeit 15000 mm/min - Frässpindel 2 x Motor 2,2 kW, Luftgekühlt - Spannzangen Werkzeugaufnahme Durchmesser 6 und 8 mm - Drehzahl Frässpindel 0 - 24000 U/min. - Antriebsmotoren Schrittmotoren - Spannung AC 230 V/50Hz - Führung in X,Y,Z Achse Rundführung - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Befehlssprache G-code - Steuerung DSP (Option MACH3 Steuerung) - Schnittstelle USB - Software VECTRIC CUT 2D PRO (NESTING I ...

- Arbeitsbereich X - Achse 1100 mm - Arbeitsbereich Y - Achse 1800 mm - Arbeitsbereich Z - Achse 240 mm - 2 Drehsupporte inklusive 3-Backenfutter - max. Werkstückdurchmesser 400 mm - max. Werkstücklänge 1000 mm - max. Werkstück Gewicht 56 kg - Arbeitsgenauigkeit -+0,04/300 mm - stabiler Arbeitstisch höhenverstellbar 700 mm, belastbar bis 1500 kg - Max. Verfahrgeschwindigkeit 5500 mm/min - Max. Graviergeschwindigkeit 15000 mm/min - Frässpindel 2 x Motor 2,2 kW, Luftgekühlt - Spannzangen Werkzeugaufnahme Durchmesser 6 und 8 mm - Drehzahl Frässpindel 0 - 24000 U/min. - Antriebsmotoren Schrittmotoren - Spannung AC 230 V/50Hz - Führung in X,Y,Z Achse Rundführung - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Befehlssprache G-code - Steuerung MACH3 Steuerung 4-Achs

Used membrane chamber filter press / filter press Rittershaus & Blecher /1000x1000 ( Mix Package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 8 times !

Technische Daten: - Rollendurchmesser    800 mm - Schnitthöhe         max. 400 mm - Arbeitsstisch    1290 x 800 mm - min. Lamellenstärke        2 mm - Tolleranz                  +/- 0,15 mm - Sägebandbreite max. 54 x 0,9 mm - Sägebandlänge min./max. 5530/5380 mm - Motorleistung 15 kW - Spannung 400 V, 50 Hz - Motorleistung Vorschub 0,37 kW - Höhe des Vorschubtteppisch 300 mm - Anschlaglänge des Vorschubteppisch 750 mm - Andruckrollen Durchmesser 160 mm - Durchlassbreite vom Vorschubteppich zum Sägeband 200 mm - Durchlassbreite vom Sägeband zu den Andruckrollen 200 mm - stufenlose Vorschubgeschwindigkeit  0-30 m/min. - manuelle Anschlagpositionierung mit digitaler Anzeige - automatische Stern-Dreieck Schaltung - Radbremsung pneumatisch - obere und untere Sägebandführung - obere Sägebandführung verstellbar über Zahnstange - automatische  ...

Rittershaus & Blecher / Membrane Filter Press Chamber Filter Press 1000x1000 Detailed Description Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a good condition and 8 machines like this availabe.

- planing width 530 mm- planing height min./max. 5-300 mm- max. chip removal 8 mm- min. workpiece length 280 mm- dimension thickness table 1000 x 530 mm- motor 5.0 kW / 400 V- speed 5500 rpm- safety knife shaft Z = 4, FI 120 mm with 4 strip planer knives 530 x 30 x 3 mm- feed speed infinitely variable 6.5 / 13 m/min.- slanted toothed steel feed roller- 2 smooth steel pull-out rollers- thickening table on 4 load spindles- electric height adjustment table pre-programmable with digital display of the planing height wood tray with scratch-free carpet support Suction nozzle 150 mm- Knife adjustment gauge- Dimensions L=1150, W=1120, H=1310 mm- Weight 650 kg

4 PCs. measurement and control cabinets with a swivelling frame and others with drawers and shrouds. Inside some with ventilation and with mounting plate. In frame door socket. Side panel with main switch. As Rittal IT units however incl. fittings. Size H/B/T 2000/800/550 The price is per measurement unit.

Technische Daten: - Schnittlänge max. 6200 mm - Schnittbreite max. 600 mm - Schnitthöhe max. 160 mm - Sägeblattdurchmesser 550 mm - Sägeblattbohrung 30 mm - Motorleistung Säge 11 kW - Getriebemotor für Vorschub mit Inverter 1,1 kW - Motor Breitenverstellung 1,1 kW - Gesamtleistung 13,20 kW - Spannung 400 V, 50 Hz - Sägeblatt-Vorschubgeschwindigkeit stufenlos 0 - 80 m/min. - Sägeblatt-Rücklaufgeschwindigkeit 80 m/min. - Druckluftanschluss 6 bar - Absaugstutzen 2 x 130 mm, 1 x 200 mm - verschiebbares Bedienpult an der Bedienseite - gummiertes Fusspedal für Start- und Vorschubregulierung des Sägewagens - Display mit Tastern zur Einstellung der Schnittgeschwindigkeit - Absaugbalken mit integriertem Lamellenschutz - elektrische Breitenverstellung mit Kugelumlaufspindel und 2 Geschwindigkeiten - inklusive HM-Sägeblatt 550 x 30 x 4,5 mm Z 44 - 3 Positionen für Höhenverstellung Sä ...

- Motorleistung Drehstrommotor 4 HP 3 kW - Motorleistung Einphasenmotor 3 HP 2.2 kW - Motordrehzahl 2800 [...] - Durchmesser Sägeblatt FI 350 mm - Durchmesser Sägeblattbohrung FI 30 mm - Wellenmass FI 25 x 80 mm - Absaugstutzen in der Saegeblattabdeckung FI 60 mm - Absaugstutzen in der Absaughaube FI 100 mm - Ausmaße Arteitstich 975 x 1580 mm - Schnittbreite FI 350 20 x 550 mm - Schnittbreite FI 400 100 x 545 mm - Schnittlänge bei max Stärke FI 350 100 x 480 mm - Schnittlänge bei max Stärke FI 400 125 x 450 mm - Max. Schnitthöhe FI 350 100 mm - Max. Schnitthöhe FI 400 125 mm - Max. Sägeblattabstand vom Tisch FI 350 70 mm - Max. Sägeblattabstand vom Tisch FI 400 45 mm - Schnitthoehe bei 45C FI 350 60 mm - Max. Schnitthoehe bei 45C FI 400 80 mm - Max. Schnitthoehe bei 45C rechts 20x380 > 100 x 330 mm - Max. Schnitthoehe bei 45C links 20x190 > 100 x 140 mm - Nettogewicht 180 Kg - ...

Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg

Screen size 1300 x 5500 mm, on basic steel-frame

Technische Daten: - Schnittbreite 800 mm - Schnitthöhe 470 mm - Sägebandlänge 5611 x 19-50 mm - Schnittgeschwindigkeit 20 m/s - Tischabmessung 900 x 700 mm - Tischhöhe 930 mm - Sägetischneigung -5C bis +45C - Absaugstutzendurchmesser 100 mm - Durchmesser der Laufrollen 810 mm - Motor-Leistung 5,5 kW - Spannung 400 V - Maschinenabmessung (B x T x H) 1300 x 750 x 2506 mm - Transportabmessung L=2500, B=730, H=1280 mm - Gewicht 550 kg komplett mit: - gummierte und präzisionsgelagerte Laufräder ermöglichen geräuscharmen Betrieb - Aluminiumanschlag mit Schnellklemmung - Maßskala am Anschlag mit 2 Lupen zum genauen Ablesen und Einstellen - Schnitthöhenverstellung einfach und schnell über Handrad- Zahnstangenkombination einstellbar - Sägebandbreite von 19 mm bis 50 mm möglich - schrägstellbarer Arbeitstisch von 0C - 45C über Präzisions- Schneckengetriebe - 2 Anschlußmöglichkei ...

used, kpl. 1 year warranty, plate size 800 x 800 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 600 liters, filter area 48m2, dimensions 5500 x 1400 x 1600 mm, weight 5.8 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 112 traverses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 5.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. ...

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

Säge-Fräse-Abricht-Dickte-Langloch Technische Daten: Abichthobel: -Arbeitsbreite max. 320 mm -Gesamttischlänge 1500 mm -max. Spanabnahme 5 mm -Abmessung Abrichtanschlag 1100 x 155 mm -Abrichtanschlag 90C-45C schwenkbar -Sicherheitsmesserwelle mit Wendehobelmesser FI 100 mm, Z 3 -Drehzahl 4500 U/min. -Motor Abrichte und Dickte 3,0 kW / 400 V Dickenhobel: -Arbeitsbreite max. 315 mm -Länge des Dickentisch 700 mm -max. Spanabnahme 4 mm -min. / max. Durchlasshöhe 4 / 225 mm -Vorschubgeschwindigkeit m/min. -Absaugstutzen FI 120 mm Kreissäge: -max. Schnittlänge 1500 mm -max. Schnittbreite 640 mm -max. Schnitthöhe 90C 103 mm -max. Schnitthöhe 45C 72 mm -min. / max. Sägeblattdurchmesser FI 250 / FI 315 mm -Drehzahl 4000 U/min. -Länge Parallelanschlag 1100 mm mit Feineinstellung -Sägeblatt schwenkbar 90C - 45C -Motor 3,0 kW / 400 V -Absaugstutzen FI 120 mm -Vorritzaggregat 0,75 kW, Dre ...

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 224 trusses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 5.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commerc ...

Description Steel holder Multifix type: B Plexiglass Chuck guard Three-jaw Chuck ø 200 mm Live Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 112 traverses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 5.50 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email ...

Technische Daten: - Arbeitsbreite 1100 mm - min. Werkstücklänge 570 mm - min. / max. Durchlasshöhe 10 / 160 mm - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min. 1. Hobelaggregat 22,0 kW - Wellen FI 180 mm - Geschwindigkeit 33,8 m/s - Spiralmesserwelle mit 440 Stück HM-Wendemesser 2. Schleifaggregat: - gummierte und gerillte Kontaktwalze 80 sh - Motor 22,0 kW - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 19,5 m/s 3. Schleifaggregat - Kombiaggregat Walze / Schuh 70 sh - Motor 15,0 kW - gummierte und gerillte Kontaktwalze FI 210 mm - Schleifbandgeschwindigkeit 18 m/s - Spannung 400 V, 50 Hz - Motor Vorschub 3,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 63,12 kW - Schleifbandabmessung 1130 x 2200 mm - Druckluft 6 - 8 bar - Luftverbrauch 15 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIGO Gummi-Transportte ...

Description Steel holder Multifix type: B Plexiglass Chuck guard Four-jaw Chuck Face plate ø 300 mm Live Fixed bezel Various gears Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 224 trusses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 5.50 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commer ...

Battenfeld injection moulding machine Type: TM 1600 / 750 control: B4 year: 2001 Clamping unit Clamping force t 160 Gap mm: 480 Holm dimension mm: 520 x 520 min/max height mm: 225...-550 Plate size: 750 x 815 injection unit Screw diameter mm: Gr 40 injection weight: 258 Injection volume cm m³: 283 Spray pressure bar: 2678 Dimensions and weights Dimensions Lxwxh m: 5.1 x 1.5 x 2.1 machine weight kg: 6000 Miscellaneous B-4 control system interface

C550 D5e Enclosed A029Z751 Genset Model C550 D5e, 550kVA Standby, 500kVA Prime,QSX15G8,Diesel,Enclosed Emergency Standby Power (ESP) Emission Level,No Certification Local Code and/or Regulation,CE Output Voltage,400/230, 3 Phase, Wye, 4 Wire Engine QSX15G8 Engine Air Cleaner-Duty Rating,Normal Duty Engine Speed Governing,Isochronous Electronic Engine Coolant Heater,240V Main Generator HC5D,50Hz,12 Leads,200V & 400V150C,Emergency Standby Power (ESP) Voltage Regulator,Torque Match Main Generator Heater,None Supplied Genset Housing Sound Attenuated,Steel,Munsell Green Cooling System Genset Mounted Radiator,50C / 122F,Genset Mounted Engine Coolant Mixture,50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device-1 800A,690V IEC, 600V UL,4 Pole,100%,Left C ...

28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 112 traverses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 6.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. ...

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 224 trusses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 6.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commer ...

14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -15 Stand / 56 bars -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 7.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Comme ...