hsc 55 used for sale

Piston distributor, 2 pieces, mounted VOGEL, SKF R 353.551 ( R353.551 ) piston distributor 353 2x 3 outputs spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions ( one distributor ): 85 x 63 x 20 mm Dimensions ( whole unit ): 180 x 85 x 20 mm

Hydraulic cylinder, double-acting REXROTH CD 70 Q 25/16 - 550 ( CD70Q25/16-550 ) Z11/01HBDM11A 899887 Piston diameter: Ø 25 mm Rod diameter: Ø 16 mm stroke: 550 mm rod thread: M10 x 1,5, Length: 16 mm flange: 36 x 36 mm bolt circle: Ø 40 mm 4x stud: M5 x 0.8, length: 20 mm used, tested ! Dimensions: 659 x 57 x 44 mm

Shelf, shelving shelving SCHÄFER SCHÄFER FIX Size 0 load capacity: 400 kg per floor width: approx. 1055 mm depth: approx. 550 mm height: approx. 2180 mm distance variable, 15, 20, 32, 40, 49, 67 mm Dimensions: 1055 x 550 x 2180 mm

Tool cabinet, drawer cabinet with base PAGUS 555 x 735 x 700 (usable height) mm 4 drawers used, tested ! Dimensions (cabinet): 555 x 745 x 820 mm Dimensions: 555 x 745 x 1025 mm

Centrifugal fan, centrifugal fan ORIENTAL MOTOR B0204-862 impeller: Ø 120 mm Motor : 0.11 kW 110 V 50 Hz 5500 rpm used, tested ! Dimensions: 190 x 180 x 180 mm

Clamping box, clamping cube, clamping angle, box angle PAGUS 1745 x 550 x 400 mm two clamping surfaces 1745 x 550 mm with two openings each 650 x 240 mm all threads M20 x 3.0 two clamping surfaces 1745 x 400 mm with two openings each 650 x 200 mm two side faces 550 x 400 mm with two openings each 240 x 200 mm Material: cast iron used, tested ! Dimensions: 1745 x 550 x 400 mm

Milling spindle, horizontal spindle PAGUS 550 mm Movement mount: Ø 18.5 / 19 mm, length: 17 mm Bearing seat: Ø 36 mm, length: 45 mm shaft with groove: Ø 40 mm, length: 95 mm, groove: Ø 12 x 59 mm bearing seat: Ø 55 mm, length: 40 mm cone: Ø 55 / 57 mm, length: 23 mm New ! Dimensions: 550 x 80 x 80 mm

Pneumatic cylinder, standard cylinder, double-acting MADER KDI-040-0550-A-PPV-M stroke: 550 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25, Length: 22 mm pmax: 1.0 MPa ( 10 bar ) New ! Dimensions: 715 x 54 x 54 mm

Pneumatic cylinder, round cylinder, double-acting NORGREN RM/55433/M/80 stroke: 80 mm piston diameter: Ø 32 mm rod diameter: Ø 12 mm rod thread: M10 x 1,1,25, Length: 20 mm pmax: 1.0 -10.0 bar Mounting thread: M30 x 1.5, length: 10 / 25 mm with nut, width across flats: 36 mm New ! Dimensions ( without nut ): 250 x 37 x 37 mm

Transnorm belt curve conveyor left GF50°-740-550 IR700 RA1948 Technical data: Conveying length middle radius (NL): 851 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 200 mm Inner radius (IR): 700 mm Conveying angle: 50° degrees support feet: optionally available Conveying speed (V m/s): 0,045-1,3m/s Drive: SEW gear motor Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports: Side guide one- and both sideds Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 700 Nominal / outside width in mm: 740 Belt width in mm: 550 angle: 50° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Ampere: 1,60 Conveyor speed m / s: 0,8 scope of delive ...

Viewing windows, machine windows, replacement frames RITTAL FT2730 Field of view: 550 x 325 mm External dimensions: 600 x 380 x 35 mm without mounting material ! New ! Dimensions ( packaging ): 640 x 400 x 50 mm

Dematic roller curve conveyor 90° right side RA1652 Make: Dematic roller curve: 90° right running outside width/nominal width(NB): 550 mm roller width (RB): 490 mm inner radius (IR): 795 mm Pitch: 60 mm Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable up and down with frequency converter Height OK roller 135 mm Scope of delivery: without supports (if required please ask) Optional: supports All prices net ex central warehouse Dr. Sonntag GbmH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 550 Roll width in mm: 490 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and impleme ...

Parts washing machine SPORER MASCHINENBAU GmbH TRK 550 SPA Basket diameter: Ø 550 mm Basket height: 140 mm Mesh size: 25 x 25 mm Usable height: 450 mm Load capacity: max. 50 kg Pumps: 1,1,85 kW circulating capacity: 7.2 - 18 m3/h Nominal voltage: 400 V 3AC 50Hz used, checked, cleaned ! Dimensions: 1050 x 1000 x 1550 mm

Angle seat valve, pneumatically actuated GEMÜ Typ 550 550 25D 1734 512G1RS113 88284925 4,0 - 8,0 bar 180°C 15 m3/h DN25 PN25 Installation dimensions: 80 mm 7.0 bar Material valve body: stainless steel (1.4435) New, with documents ! Dimensions ( valve ): 270 x 110 x 65 mm Dimensions ( packaging ): 290 x 120 x 110 mm

diamond cutting wheel, diamond grinding wheel GALLER DIAMANTTECHNIK diameter: Ø 550 mm thickness: 4.5 mm Segments: 35 Segment length: 47 mm Segment width: 6 mm Bore: Ø 25 mm Stem: MUMMENHOFF 19740600 New ! Dimensions (packaging): 550 x 550 x 20 mm

Roll stand, roller stand PAGUS 420 - 550 mm Support height: 420 - 550 mm, infinitely adjustable Roll diameter: Ø 56 mm Roll width: 227 mm used, tested ! Dimensions ( retracted ): 340 x 320 x 450 mm

Combined precision roller bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 55115 INA No. ZARN 55115 TV shaft diameter: Ø 55 mm outer diameter: Ø 115 mm bearing thickness: 82 mm New ! Package dimensions: 135 x 135 x 110 mm

hob, gear cutter for hobbing machine JUGOALAT Type M Module 1,5 5591 HSS bore Ø 22 mm New ! Dimensions: 57 x 57 x 39 mm

hob, gear cutter for hobbing machine JUGOALAT Type M Module 1,25 5522 HSS Bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm

Ruby ball probe, 5 pcs RENISHAW A-5555-0079 ball diameter: Ø 1,5 mm gauge length: 24 mm holder material: stainless steel Overall length: 33 mm shaft diameter: Ø 1 mm shaft material: carbide Thread: M5 material of the stylus: Ruby New ! Dimensions ( individual package ): 59 x 16 x 16 mm

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Stick electrodes 4.0 x 550 -Type: FOX CM 2 Kb -Analysis: AWS A5.1 -Price: per package -Number: 40 packages available -Weight per package: 5.6 kg

Ruby Ball Probe RENISHAW A-5555-0023 602030-9012 Ball Diameter: Ø 4 mm EWL: 54 mm Bracket Material: Stainless Steel Overall Length: 64 mm Shaft Diameter: Ø 2 mm Shaft Material: Tungsten Carbide Thread: M5 Probe Material: Ruby New ! Dimensions ( Packaging ): 123x 17 x 17 mm

Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt:KT58, will be changed Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus V ...

Micro drills, head drills, drills, 4 pieces HAWERA PRÄZISIONSWERKZEUGE GmbH Type 556 Ø 1,15 x 10.0 mm 5934 diameter: Ø 1.15 mm maximum drilling depth: 10.00 mm overall length: 38 mm shank diameter: Ø 3.125 mm shaft length: 24 mm Other quantities on request ! New ! Dimensions ( transport box ): 71 x 51 x 10 mm

Genuine Woodward 2301A Load Distribution and Speed Control 9905-22B B, Revision A, Cat. P/N: 4P-5518

Description: Power supply: 230V/50Hz Power: 550W Maximum flow rate: 17,000 l/h Hose connection diameter: 2' Maximum water lifting height: 8 m Power cable length: 8 m Protection functions: thermal switch, float Weight: approximately 14kg Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 10 kg

Description: Power supply: 230V/50Hz Power: 550W Maximum flow rate: 17,000 l/h Hose connection diameter: 2' Maximum water lifting height: 8 m Power cable length: 8 m Protection functions: thermal switch, float Weight: approximately 14kg Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 10 kg

Description: Power supply: 230V/50Hz Power: 550W Maximum flow rate: 17,000 l/h Hose connection diameter: 2' Maximum water lifting height: 8 m Power cable length: 8 m Protection functions: thermal switch, float Weight: approximately 14kg Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 10 kg

Decorative holding card TMCC

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...

Screw diameter: 55 mm Injectable volume: 515 cm3 Injectable weight: 460 g Injection pressure: 2400 g Column width: 1020 x 920 mm Aperture stroke: 900 mm Mould thickness: min: 600 mm - max: 1050

BAZ ideal for room door production with tool changer Lock box milling unit separate from the side Belt milling or drilling units on the other side incl. tools

Cat. No. 12-1130 in very good condition Measurements and Weight: LxWxH: 160 x 45 x 102 cm Weight: 192 kg Model: HTIRM Type: 55VT-DS NW 50 4,4 kW 100 l/min, 6000 l/h 9 bar DN 65 Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

Wuerfeltisch 550 mm

Cone cutter Makita, type 5500 S in a fit state. Volts 220 volts motor power 1400 Watt speed of 1650/2200 lateral adjustment range 45/20 mm clamping range Max (Hxw) 240 x 210 mm trunnion strengths 0 mm to 130 mm PIN length an average 90 mm

Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Machine

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Underscore 5,158:1

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

Magurit Unicut 555 frozen meat cutter / dicer, with lift, cutting dimensions up to 480 mm x 250 mm x 650 mm, processing temperature -25°C, knife head with 18 knives You are very welcome to test the machine in our facility in Koblenz, Germany.

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...