hsc 55 used for sale

Winter tires, complete winter wheels, alloy wheels, aluminum rims with tires, complete aluminum winter wheels -Manufacturer: AEZ / Yokohama, aluminum complete winter wheels suitable for Audi Q5 and others -Rim: AEZ 8.5 J x 19 H2 ET35 ACL9L -Tyres: Yokohama 235/55R19 101V DOT 1816 -Tread depth: 3 to 5 mm, see photos -Transport dimension: 1480/800/H500 mm -Total weight: 100 kg/net

Electric motor, three-phase motor -Handover: in the current condition as seen -Drive shaft: damage, see photos -Manufacturer: ETM, electric motor type B5-80x0,55x1500 A -Power: 0.55kW -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Type: B5 -Dimensions: 265/198/H220 mm -Weight: 11.3 kg

Valve terminals, multi-pin connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island -Valves: Festo 161 360 T702 and 162 550 T602 -Pressure regulator: 0 - 4 bar -Individual components: see photos -Dimensions: 260/160//H130 mm -Weight: 2.5 kg

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Manufacturer: Matrinor, load racks lashing points 4 pieces -Original use: aerospace industry -Payload: 9840 kg -Shackle mount: Ø 120 mm / M42 -Price: complete -Dimensions: 555/252 / H175 mm -Weight: 62 kg / pc.

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding fume extractor, extractor fan, pressure fan, vacuum fan -Fan and plate: made of stainless steel -Motor power: 2.2 kW -Speed: 1440 rpm -Total pressure: m bar -Volume flow: m³/h -Diameter fan: 550 mm -Number: 3 pieces available -Price: per piece -Dimensions: 570/625/H625 mm -Weight: 74 kg/piece

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1045 mm -Width: 14 mm/height: 39 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg/piece

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1140 mm -Width: 14 mm/height: 59 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.45 kg

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Design: stable -without: roller conveyor drive motor -Roll width: 557 mm -Conveying length: 680 mm -Diameter roll: 70 mm -Dimensions: 875/700/H125 mm -Weight: 44kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1085 mm -Width: 16 mm/height: 61 mm -Price: per pair (left right) -Weight: 2.7 kg

PLC control, machine control, module -Make number: 2529 and 2530 -Serial number: 109-998-4201b-2 -Dimensions: 190/130/H20 mm -Number: 2x available -Price: per piece -Weight: 200 g

Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 555 mm -Piston diameter: 80 mm -Type: DNC-80-555-PPV-A Q R3 -Pressure: max. 10 bar -Dimensions: 770/93/93 mm -Weight: 8.4 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 558 mm -Short cone flange for: bayonet disc mounting, cone size 8 -Lock rice: Ø 171.4 mm -without: bolt -Through hole: Ø 90 mm -Weight: 74 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 440 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: IP 54 -Weight: 3.3 kg

Radial fan, chip extractor, fan, suction, chip fan -Motor power: 37 kW -Speed: 1470 rpm -Connection input: Ø 600 mm -Connection output: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: R14.5 mm -Square: 101 x 71 mm -Total length: 552 mm -Weight: 26 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm -Total height: 194 mm -Weight: 20 kg

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 270/230/H200 mm -Weight: 16 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Speed: 27 m/min -Drive: 0.6 kW -Belt width: 450 mm -Belt length: 2040 mm -Roller conveyor: powered -Roll width: 550 mm -Transport length: 960 mm -Rollers: Ø 31 mm -Roll distance: 40 mm -Height: 850 mm adjustable and tiltable -Transport dimensions: 3160/620/H850 mm -Weight: 354 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Dimensions: 5545/535/H268 mm -Panel thickness: 60 mm -Plate: with supporting ribs -Weight: 3000 kg

Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg

Gear motor, electric motor, three-phase motor -Manufacturer engine Bonfiglioli type: 55BN-2 -Gearbox manufacturer Bonfiglioli type: -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: -Weight: 4 kg

Trolley, dolly, wheelchair, transport dog -Angled frame: 825 x 550 mm -Angled frame made of: stainless steel VA -Castors: made of polyamide -Diameter: 160 mm -2 swivel castors and 2 fixed castors -Number: 24 cars available -Price: per piece

3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-60a - Gathering tower VAC-60c - Stack lowering table ST-40 Saddle stitcher Stitchliner 5500: - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-sided cutters HTS-30 VAC-60a, VAC-60c Suction Air Gathering Machine - Technology: Touch & Work - Model: Suction and blowing air collection tower - Number of stations: 6 - Error avoidance: error, double-blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (36 stations) Programs: - Double cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - Selective gathering - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-350g/sqm - Loading capacity: 130mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50/60Hz - 1.86kW - Dimensions:  ...

Guascor FGLD360 Gas Generator Se, ( it's same Waukesha as 36gld engine) but brand with Guascor assembler. Power 550KW, 675kva. year 1998,, Import from Europe not run local in Pakistan. Scope of supply: Complete Engine with alternator on skid with Gas street and PLC Control panel..

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

For sale due to liquidation of the company Nimco 550 with screw cap applicator. max. 2,500 units/h Filler was completely rebuilt in 2015 and is in very good condition. Currently listed for Elopak cartons. Sealing plates for Italpack are also available. Incl. many spare parts. The bottler is still under construction and can be visited at any time. Inquiries are best made by phone or Whatsapp. Phone: 0176 22936995

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: Festo, compact cylinder type ADNGF-25-50-PA 554236 -Stroke: 50mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Quantity: 1x cylinder available -Dimension: 105/40/H40 mm -Weight 0.3 kg

Cutting power / Schnittkraft: 55 ton. Hole punch / Lochstanze: 200 x 15 mm steel sheet metal / Flachstahl. Flat steel shears / Flachstahlschere: 230 x 20 mm │ 375 x 10 mm. Angular cutting / Winkelschneiden: 90° 125 x 13 mm │ 45° 70 x 10 mm. Overall dimensions / Abmessungen: 1.600 x 710 x 1.700 mm.

BOY 55 silicone injection moulding machine. Top condition used for technical service lab and never used in production. Description Features of the Boy 55A Procan CT Procan CT control Boy configured from factory for silicone. Hydraulics, closed loop with 35mm radius shut off nozzle. Clamping unit. 42 mm LSR silicone plasticising unit. 2 station Air ballast. Anti vibration mounts. Watercooler for barrel available Perfect condition. Used for lab samples only. All offers considered. Purchaser collects.

Twin-screw extruder complete with gravimetric dispensers, water refrigeration system and bigbag weighing and filling system Sale of production line consisting of: • A BANDERA model 55LD42 twin-screw extruder; • A dispenser called “KYARA” positioned upstream of the extruder, in the part closest to the motor. The Kyara consists of four granule hoppers that mix up to four different materials. The mix obtained is then managed by a single main dispenser (DOS 1) positioned naturally also upstream of the twin-screw line. The charge of the four KYARA hoppers is completely automatic and managed by a blower positioned on the ground. The latter is connected with four lances which must each be inserted into a different bag of material that has been chosen mix. The mixture proportions are set by an operator directly on the panel control dedicated to the dispenser; â ...

Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA Year of production 2018 1. Extruder A – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 2. Extruder B – Single screw extruder 7530/LHE - Screw diameter 75 mm - L/D ratio 30/1 - Extruder drive – 118 kW AC - Nominal output in LDPE MFI 1.0 275 kg/h - Lever type screen changer 3. Extruder C – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 4. 3-Layer Blow film co-extrusion die CBH500 F/3S-IBC with D 275 mm, LDPE, gap 1,6 mm 5. Internal bubble cooling system - Introduction air fan 7,5 kW with heat exchanger battery - Extraction air fan 7.5 kW - ...

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 without drive -Strap width: 550 mm -Total conveyor length: 650 mm -Drive shaft: Ø 20 x 100 mm -Quantity: 3x conveyor belt available -Price per piece -Transport dimensions: 840/660/H130 mm -Weight: 33 kg/pc.

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 -Speed: frequency controlled, up to approx. 150 m/min -Strap width: 550 mm -Conveying length: 655 mm -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo of nameplate -Quantity: 1x conveyor belt available -Transport dimensions: 960/670/H215 mm -Weight: 49 kg

Serial Number: GG5551A-8672 Weight: 4,5 tons Power: 18 kW Air pressure: 7 Bar Length mm: 6100 Width mm: 5000 Height mm: 900 Working height: 90 cm. Transport size L x W x H: 6,1 x 3,5 x 4,4 Min.-max glass size: Cutting width 5000mm, Jumbo Plate Condition machine : Disassembled in working order Control type: Semi-automatic Electric. Connection: 63A 3P+N+PE Documentation: Yes Instructions: Yes Electric diagram: Yes Photos/film available: Photos and video available

Key data: 8 mm, 50 mm, 5860 mm

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!

Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – "ENGEL ERC53/1-F" Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1

Clamping unit Clamping force [kN] 550 Dimensions of mounting plates (hxv) [mm] 530 x 500 Clearance between columns (hxv) [mm] 360 x 355 Min./ max. mould height [mm] min 150 Maximum opening width [mm] 500 Injection Unit Screw diameter [mm] 32 Injection volume [cm3] 75,5 Injection weight [g] 69,54 Injection pressure [bar] 1030 Dimensions & Weight Net weight with control cabinet [t] 2,25 Dimensions (L x W x H) [m] 3.25 x 1.09 x 2.04

Key data: 55 t

Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan

Key data: 540 mm, 540 mm, 560 mm

Manufacturer: CINCINNATI Type CFV 550i Year of construction 2006 Control Heidenhain iTNC 530 Machine weight approx. 4.2 t Tool holder SK 40 x-travel 540 mm y-travel 540 mm z-travel 560 mm Speed range 8,000 rpm max. table load 500 kg Space requirement approx. 2.6 x 3 x 2.7 m Number of tools in the magazine 30 pl. Internal coolant supply yes

Engine Brand: FORD, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 631 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 175 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218743, , = More information =, , Type: Engine, Height: 170 cm, Type number: 2802 E V8 POMPSET 550M3/H

Engine Brand: FORD, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 56 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218848, , = More information =, , Type: Engine, Type number: 2714E POMP 550 BAR

Engine Brand: VOLVO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 400 Kw, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 550 , Generator Volts: 230/400 , Generator Amps: 794 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/218538, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 3.625 kg, Type number: V550K GENERATOR 550KVA

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...

Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails, front support -Manufacturer: Grass, NP 2-S-RER front support set -Type: 7607/550/2S RF SET/9006/1 -Item no.: F102048036101 -Length 550 mm -Quantity: 6x set available -Price: per set -Transport dimensions: 550/150/H40 mm -Weight: 0.5kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, extension rails, heavy-duty extension, full extension ball guide -Manufacturer: Häfele, drawer rail ball guide full extension type 422.22.551 -Retracted length: 550 mm -Extension length: 550 mm -Load capacity: 150 kg -Quantity: 1x set available -Transport dimensions: 550/55/H40 mm -Weight: 3.3 kg

Scanning electron microscope with the following characteristics: New purchase price: €76k Performance : - Resolution: 3.5 nm @ 30kV - Magnification: 18x to 300000x -Acceleration voltage: 0.5 to 30 kV - Image digitization up to 1280x960x8bits - Turbo-molecular pump Power supply : -220 V, 50Hz, 3kVA ground (without neutral) -Temperature: 20 +/- 5°C -Humidity: less than 60%. -No cooling required Image acquisition : - Software installed on PC under windows 2000 Transport: optional, quote on request

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...