136,096 used machines on RESALE, but how to find them? Machine Search
Automatic Cartesian palletizer manufactured by HSK GmbH. The equipment receives the bags by conveyors, positions and forms them in layers and carries out palletizing automatically according to the programmed configuration. It offers a capacity of up to 1,200 bags/hour and a control system through a Siemens SIMATIC touch screen. It has spare parts for its different components. In your state
used
GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical450 mmTool changerType of magazineChain Number of tools30 Type of gripperDouble gripper Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationHSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent co ...
table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 1500 kg traversing speed: 200 m/min total power requirement: 55 kW dimensions of the machine ca.: 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 40 mm STAINLESS STEEL 40 mm ALUMINUM 40 mm BRASS 16 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: hydraulic quick die change system: yes feedstock transport direction: right to left SLIDE total force (nominal): 400 to stroke: 200 mm COUNTER RAM nominal force: 100 to stroke: 30 mm V-RING nominal force: 200 to stroke: 30 mm TOOL DIMENSIONS lower table (left-right): 650 mm lower table (front-back): 650 mm shut height max.: 420 mm passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 12 mm feed velocity max.: 30 m/min feedstock transport direction: right to left LEVELLER UNIT sheet width max.: 500 mm sheet width (min): 60 mm sheet thickness max.: 12 mm sheet thickness min.: 1 mm integrated feed function: yes STRIP-FEEDER sheet width max.: 400 mm sheet ...
: gebraucht : 1992 : 090174 : Belgien : 17800 € : 1 : 3050 mm : 6 mm : 11 - 25 1/min : 0.5 - 3 ° : 18 : 750 mm : 11 kW : 3850 mm : 1750 mm : 1720 mm : 4600 kg : 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration ...
Key data: 4680 kN
Chen Hsong JetMaster 468-MK6 with the robot Samfacc / hybrid machine Year of Make: 2021 Injection unit: Screw diameter: 83 mm Injection weight: 2043 g Spray pressure: 1840 bar Dosing volume: 2245 ccm Clamping unit: Clamping force: 468 t Tiebar spacing: 830x830 mm Size of the clamping plates: 1210x1165 mm Ejector: electric Clamping unit: toggle lever Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Automatic tool height adjustment Rexroth Hydraulics The machine was serviced in Germany Robot Samfacc Year of Make: 2022 4-axis robot: 3 axes are driven by servo motors (el ...
Key data: 2080 kN
Chen Hsong JetMaster 208-MK6 with the robot Samfacc / hybrid machine Year of Make: 2021 Injection unit: Screw diameter: 52 mm Injection weight: 502 g Spray pressure: 1893 bar Dosing volume: 552 cc Clamping unit: Clamping force: 208 t Handlebar spacing: 530x530 mm Size of the clamping plates: 790x765 mm Ejector: electric Clamping unit: toggle lever Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Automatic tool height adjustment Rexroth Hydraulics The machine was serviced in Germany Robot Samfacc Year of Make: 2022 4-axis robot: 3 axes are driven by servo ...
Key data: 1280 kN
Chen Hsong JetMaster 128-MK6 with the Samfacc robot / hybrid machine Year of Make: 2021 Injection unit: Screw diameter: 41 mm Injection weight: 246 g Spray pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tiebar spacing: 410x410 mm Size of the clamping plates: 620x605 mm Ejector: electric Clamping unit: toggle lever Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Automatic tool height adjustment Rexroth Hydraulics The machine was serviced in Germany Robot Samfacc Year of Make: 2022 4-axis robot: 3 axes are driven by servo motors (electr ...
Key data: 880 kN
Chen Hsong JetMaster 88-MK6 with the Sepro Industrial Robot Succes 7 / Hybrid Machine Year of Make: 2021 Injection unit: Screw diameter: 41 mm Injection weight: 246 g Spray pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tiebar spacing: 410x410 mm Size of the clamping plates: 620x605 mm Ejector: electric Clamping unit: toggle lever Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Automatic tool height adjustment Rexroth Hydraulics The machine was serviced in Germany Robot Samfacc Year of Make: 2022 4-axis robot: 3 axes are driven by servo ...
bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 180 mm table surface area: 765 x 620 mm 0: 130 - 1750 U/min feed: 0,1 - 0,2 - 0,3 mm/U tool taper: MK 4 total power requirement: 3,0 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drilling machine with: Power feed 2 gear stages Tapping attachment Footswitch Machine light Coolant system Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 6020 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm back stop - adjustable: max. 1000 mm work height max.: 1030 mm no. of strokes: 5 - 10 Hub/min cutting angle: 0.5 - 3.0 ° down holder: 33 Stück Control: SC 100 T engine output: 11.0 kW weight of the machine ca.: ca. 27000 kg range L-W-H: 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left Control unit with LCD display Pre-selected positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment Programmable retraction from the backgauge Programmable cutting length limitatio ...
CONTROLS PLC PRESS DESIGN quick die change system: yes SLIDE total force (nominal): 630 to stroke: 125 mm V-RING nominal force: 320 to TOOL DIMENSIONS lower table (left-right): 800 mm lower table (front-back): 800 mm shut height max.: 420 mm STRIP-FEEDER band lubrication system: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6800 mm space requirements -front/back-: 3300 mm total height: 3730 mm height above floor level: 3005 mm height under floor level: 725 mm total weight approx.: 26000 kg ATTACHMENTS -FINEBLANKING PRESS- autom. tool clamping device: yes light barrier: yes decoiler: yes leveller unit: yes Strip levelling machine SCHMID HR12H (YoM 1995) including belt system
CONTROLS PLC SIEMENS SIMATIC HMI SLIDE total force (nominal): 320 to stroke: 200 mm COUNTER RAM nominal force: 63 to V-RING nominal force: 100 to TOOL DIMENSIONS shut height max.: 360 mm DIMENSIONS / WEIGHTS total weight approx.: 18000 kg The system was fitted with a new control unit approximately 1.5 years ago including belt system Inkl. Decoiler Schmid HR10
: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 22800 € : 1 : 3100 mm : 6 mm : 0.5 - 3.5 ° : 9.5 kW : 950 mm : 4070 mm : 2330 mm : 3400 mm : 1850 mm : 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PU ...
Asparagus peeling machine with eight stations, The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table., The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/hepro-hsm-180-sap-asparagus-peeler/, Type: Asparagus peeler (Schäl-Automat), Stations: 8, each switchable, Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW, Construction: Stainless steel, on castors
Offer 26249 Technical data: - Max. cutting width 2030 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Front angle stop - Front support arms - Back gauge 5 - 750 mm - Footswitch - Drive 400 V / 4 kW - Pneumatic connection 6 bar - Space requirement approx. W 3600 x H 1250 x D 1900 mm - Weight approx. 4 t
GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs Spindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Mach ...
GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal450 mmCross580 mmVertical460 mmTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools30 Rigid tableRigid table, clamping area 460 x 600 mm / 18,11 x 23,62 inch Loading weight max. 600 kg / 1322 lbs Spindle speed up to 40,000rpm with Shaft CoolingSpindle speed 20 up to 40,000 rpm within shaft cooling for tool taper HSK-E50 DIN 69893 AC-Main drive with 19,5/15 kW (100/40%DC) 14, ...
TSUGAMI HS207 CNC automatic lathe was built in 2011 in Japan by TSUGAMI CORPORATION. The machine is designed for the mass production of small parts with complex geometries, used in various industries. It enables precise turning, drilling and threading of bar material with a maximum diameter of 20 mm. Machining is performed in 9 numerically controlled axes using the main spindle and a sub-spindle. This configuration enables operations to be performed on both sides of the workpiece without the need to re-clamp it. Once machining on one side is complete, the workpiece is transferred to the second spindle, which continues the operation from the opposite side. As a result, successive operations can be performed in a single cycle, which speeds up production and ensures high dimensional repeatability of the finished parts. The TSUGAMI HS207 is operated using a FANUC Series 31i-MODEL A CNC ...
bore capacity in steel (diameter): 40.0 mm bore capacity in cast iron: 55.0 mm throat: 335 mm bore stroke: 200 mm bore spindles - Morse Taper: MK 4 turning speeds: 60 - 1.530 U/min table:: 740 x 620 mm feed: 0.15/0.2/0.3/0.36 mm/U total power requirement: 2.6 / 3.1 kW weight of the machine ca.: 850 kg range L-W-H: 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition () Features: - Heavy-duty/robust bench-mounted drill press - Drive: VARIO V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data Maximum pressure: 16 tons Power connection: 400V / 4kW Press force: 2.08 kg/cm² Year of Make: 2006 Bale size: 1100x700x800 mm Productivity: approx. 3 bales/hour Bale weight: approx. 150-250 kg Machine is fully functional after technical supervision.
Technical data Maximum pressure: 54 tons Power connection: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of Make: 2004 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Bale tying only with wire Machine is fully functional, after technical inspection and after renovation
Technical data Maximum pressure: 8 tons Power connection: 400V/4kW Press force: 3.23 kg/cm² Year of Make: 1991 Bale size: 550x450x350 mm Productivity: - Bale weight: 30-60 kg Price: on request Machine is fully functional after technical supervision.
x-travel: 885 mm y-travel: 600 mm z-travel: 450 mm b-axis: +20/-110 ° c-axis: 360 ° spindle speed:: 18.000 U/min spindle drive: 15 kW Tool adapter: HSK-A63 table diameter: 600 mm Tools changer: 30 fach/tools chip conveyor: kW Internal cooling system: 401 bar Control: HEIDENHAIN iTNC 640 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m DMG HSC 70 – 5-Axis Machining Centre - 5-axis machining centre with linear motors - HEIDENHAIN iTNC 640 - Portal-type construction - Electrospindle with 18,000 rpm - 30-tool automatic tool changer - Probes included for tool and workpiece measurement - Internal coolant supply at 40 bar pressure - BLUM laser tool measurement system - DMG TS649 workpiece measuring probe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
vertical machining center, year 1999, CNC HS Plus (Heidenhain atek). Used machine. More info & price on IndustrialBuyer.
The machine is in good technical condition; testing is possible by prior arrangement. In our facility, the machine was used exclusively for machining graphite electrodes.
diameter: . mm weight: . kg Type: HSS 0 Item HSS milling cutters etc., see pictures. Technical specifications are based on information provided by the manufacturer or previous operator and are therefore non-binding for us. Subject to prior sale, our standard terms and conditions of business and sale apply exclusively. About us Over 400 machines in stock Over 15,000 m² of warehouse space, 70-tonne crane capacity Over 10,000 accessory items for your workshop If you are looking to sell machines, production lines, or your entire facility, please get in touch with us. You can find further offers on our website. Viewings are possible by appointment. We look forward to your visit. The Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
as good as new Hastenständer drill, power 50 mm, weight approx. 1.5 to
Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.
vertical machining center, year 2010, CNC iTNC 530. Used machine. More info & price on IndustrialBuyer.
diameter: div. number: 20x tool adaptor: HSK-A 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: div. number: 30x tool adaptor: HSK-A 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: div. number: 30x tool adaptor: HSK-A 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HSM 18 – Vertical Hydraulic Baling Press Manufacturer: HSM Pressen GmbH, Germany Model: HSM 18 Machine Type: Vertical Hydraulic Baling Press Year of Manufacture: 1981 (identification plate) Condition: Used Technical Specifications Description Specification Manufacturer HSM Pressen GmbH Model HSM 18 Pressing Force 18 Tons Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Door Bale Ejection To be confirmed Compression Chamber Heavy-Duty Steel Construction Electrical Supply To be confirmed Hydraulic Power Unit Integrated Control System Push-Button Controls Safety Mechanical Door Locking System Machine Number 180 071 Year 1981 Inventory Number 644987 Auction-ID: A1-51153-97
Good, working condition | Control: Multipulse 64 | Photo details: INGERSOLL GANTRY 400 wire EDM / machining system. Multipulse 64 control visible. Machine plate: serial number 574347, year of manufacture 2003, type Gantry 400 HSJ, made in Germany. Electrical data: 400 V 3-phase, 50 Hz, control voltage 24 V DC, power input 14.8 A, maximum fuse 25 A. Operator, training and programming manuals are present. Auction-ID: A1-51094-3
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg
test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg
tool holder, tool holder, milling chuck, milling tool, chuck, milling cutter holder -Chuck: Holder: HSK50 -Clamping range: Ø 0 - 10 mm -Dimensions: Ø 63 x 135 mm -Weight: 1.4 kg
Tool magazine, tool holder, tool mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg
Tool holder, tool magazine, tool mount, milling mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg
end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg
The facility includes a comprehensive range of production and support equipment, including: 4 Cold Rolling Mills (4Hi & 2Hi) – including tandem rolling lines with speeds up to 500 m/min, processing strip widths from 4–100 mm and thicknesses from 0.4–4.5 mm. 9 Annealing Furnace Units – stretch and batch furnaces operating with nitrogen and hydrogen atmospheres, with temperatures up to 1,000°C. Inspection, NDT & Finishing Lines – including eddy current inspection, surface grinding, shaving, and coil-to-bundle conversion. 2 CRM Work Roll Grinders (WMW, Germany) – together with blanking lines capable of producing up to 240 hacksaw blanks per minute. Laboratory & Auxiliary Equipment – including tensile testing equipment, optical microscopes, compressors, punch presses, and other supporting machinery. In combination lot, but also available for individual pu ...
360m3/hour, H 13m, stainless steel housing. Auction-ID: A1-50340-16
Capacity: 360m3/hour, Head: 13m, 1450 revolutions per minute. Auction-ID: A1-50340-95
- Track width: 18cm. - To recover. Auction-ID: A3-46141-13015
maximum number of results exceeded
please refine your search
1.000 € 
