135,690 used machines on RESALE, but how to find them? Machine Search
automatic baler Manufacturer: HSM Type: VK 8818 R-FU Year of construction 2021 Operating hours: approx. 81 Technical data: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Practical throughput: approx. 50 % of the previously mentioned theoretical performance Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg Optionally with: Press feed belt Manufacturer: ? from ...
used baler Manufacturer: PAAL Type: DOKON 500 with twine tying Year of construction: May 2014 Technical data: Binding: 5-fold horizontal Press weight up to: approx. 30 t Press force: 122 t Specific pressing force: 9.90 kg/cm² Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 1 x 45 kW Throughput: 250 m³/h Pressing services: at 100 kg/m³ bulk density: approx. 25 t/h at 150 kg/m³ bulk density: approx. 30 t/h at 200 kg/m³ bulk density: approx. 35 t/h Binding: 5-fold horizontal Transport dimensions: Length: 13,300 mm Width: 2,600 mm Height: 3,300 mm without yarn unwinding devices, without control cabinet, without binding twine, without feed belt, without a personal protection system, without conveyor belt hopper and without walking surface with vertical la ...
gebr. Veneer press OTT JUNIOR JU2511 Year 1998 ges. Connected load: 16.1 kW (rated current: 24.5 A) Pressing area: 255 x 110 cm Electric heating plates aluminum gold anodized Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 90 mm Total pressing force: 70 t Spec. Pressure: 2.8 daN/cm² Hydraulic pressure max.: 275 bar Power per heating plate: 7,800 W Circumferential safety step strip inside + outside (emergency stop) Automatic opening (time-controlled) Stroke limitation / opening width limitation (adjustable limit switch) The press can be disassembled. External dimensions: approx. 304 x 123 x 191 (WxDxH) Weight: 3.0 t Guter gebr. Condition. Paint touched up in places.
Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS
Press brake manufactured in 2023. This GWEIKE GKS-BC0315 features a pressing force of 50 t and a maximum sheet length of 1,600 mm. It is capable of bending dimensions up to 1,500 x 1,500 x 170 mm, making it suitable for large-scale boxes and panels. If you are looking to get high-quality bending capabilities, consider the GWEIKE GKS-BC0315 machine we have for sale. Contact us for further details regarding this machine.
3 × Hughes HPS 2200 High Pressure Pumps 320 bar – 228 l/min, used For sale are three used Hughes HPS 2200 high-pressure pumps in 100% working condition. The pumps were only taken out of service because the associated diesel engines and controls were needed for another project. Technical data Manufacturer: Hughes Pumps Ltd. (England) Model: HPS 2200 Max. operating pressure: 320 bar Flow rate: 228 l/min Pump speed: 400 rpm Input speed: 1,800 rpm Gear ratio: 4.50 : 1 Transmission oil: EP90 Oil capacity: 18 litres Years of construction 2 × built in 2010 (yellow pumps) 1 × built in 2009 (blue pump) ✔ 100% functional condition The operating hours cannot be specified because the original diesel engines and controls were already dismantled before storage. The pumps are suitable for a wide range of industrial applications, including water pumping, mining, mari ...
This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details.
Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device
Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg
This 5-axis TRUMPF TRUPUNCH 3000 was manufactured in 2007. It features a maximum cutting force of 180 kN, making it suitable for various punching applications. The machine has undergone major contract maintenance in February 2026, ensuring its operational reliability. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUPUNCH 3000 CNC punch press we have for sale. Contact us for further details.
RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis
LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs
Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010
Laminating press manufactured in 2016. This MASTER PUR-1400 is a professional, high-performance laminating line designed for single-sided panel lamination using PUR Hot Melt adhesive. It features a working width of 1,400 mm and can handle maximum panel sizes of 2,800 × 1,300 mm. If you are looking to get high-quality laminating capabilities, consider the MASTER PUR-1400 laminating press we have for sale. Contact us for further details regarding this machine.
LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs
pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg
Used tablet press made by KORSCH Pharmapress 300 series. Model PH 343. Tablet diameter 6-13mm. 43 stations. 4 pieces available (2 x 1984, 1 x 1989, 1 x 1990)
This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details.
New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor.
Brand new gear pump, with internal gearing for PAAL Konti, Pacomat channel baling press. Can be used in systems with a motor of at least 22 kW
Dual hydraulic pump for PAAL, 45kW Used 2-piece hydraulic pump for PAAL channel baling press. Can be used in systems with a 45 kW motor
Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table
Folding sheet press Tränklein BP; good condition; cleaned and tested; Working width 820mm. Bundling press Tränklein BP; good condition; cleaned and checked; working width 820mm.
Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.
Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R
On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.
HEBÖ WZT24 24T horizontal bending machine was manufactured in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ WZT24 is a efficent horizontal bending machine designed for the precise bending, forming and straightening of workpieces made from materials suitable for cold forming. All these processes are performed by a horizontal working unit with a maximum press force of 24 tonnes. The machine is equipped with a 950 x 600 mm work table and a tool cabinet, which provides convenient storage for the necessary tools. The machine operator has at his disposal an intuitive PLC controller and an ergonomic foot control. All this is complemented by a rigid design that ensures proper stability during intensive machining operations. The HE ...
ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates
Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details.
ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates
Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...
Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface
This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN
Technical data Weingarten Mechanics Press 1600 to Nominal press force from 20 mm before UT 16000 kN Endurance stroke rate at idle infinitely variable 10 - 22 strokes/min Setup stroke number 5 - 10 stroke/min Plunger stroke 600 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 1150 mm Table top dimensions, length x width 3600 mm x 23 Plunger plates dimensions, length x width 3600 mm x 23 Passage between uprights in length 3650 mm Passage between the uprights in the width of 2300 mm Transfer height above press table 750 mm Quick Tension Plunger Plate: Swivel voltage, stationary 4 pcs. on each side Tool clamping flange thickness 70-0.2mm Clamping force ...
Horizontal Baller for SALE/RENT BAUER 300 Baller is in good working condition (was used in printing house)! Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Kledex Dk S Asm Aty Atjl Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE UPON REQUEST! ----- Verkaufen/Mieten Ballenpress BAUER 300 Technische Daten: Bsbmeycfv Iecbw Nvswh Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 300 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!
Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.
Ex pressure vessel with agitator, MDG 45, 100 hours, V4424140313 Walther, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 5.020 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. Top Condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Top cleaned and ready for immediate use. Technical data: - Ex Stainless steel pressure vessel MDG45, 42.8 liters, 4 bar, Walther-Pilot. - Ex electric agitator with gear motor, SK0Z/2G-63S/4 2G TF RD, Nord - Ex pressure regulator, V3540000000, Walther-Pilot - Pneumatic controller, ITV2030 34F2N3, SMC - Incl. industrial plug and cable - optional with Defende ...
SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm
Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100
LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...
maximum number of results exceeded
please refine your search
10 € 
