honing machine used for sale

PEMAMO MDR 120E horizontal honing machine was manufactured in 2002 by the Swiss company PEMAMO HONING PHOSA SA. The machine is used for specialised honing of bores, such as piston cylinders, in order to achieve the required dimension, tolerance and high surface quality. Thanks to the honing machine, shape defects such as scratches, axis curvature or waviness are removed. The honing machine performs finishing of bores with diameters from 1.5 mm to 40 mm, using a spindle rotating from 310 to 1860 times per minute. The horizontal honing machine is provided with an AR 340 semi-automatic expansion unit with a repeatability of 1 µm. The total weight of the machine is approximately 135 kg. Technical data of the PEMAMO MDR 120E honing machine - minimum honing diameter: 1.5 mm - maximum honing diameter: 40 mm - rotational speed of the spindle: 310-1860 rpm - semi-automatic expansion un ...

Honing machine make DELAPENA type Auto-Speedhone Mod. SSeries 4618/1 built in 1998Bore diameter at aut. U. SEMIAUTO. Honing: 3 - 20 mmDiameter range for honing by hand: 1.2 - 79 mmSpindle speeds infinitely variable: 375 - 1500 rpmand: 250-1000 rpm.Speed of the working stroke stepless: 43 - 380 H / minStroke length between: 0 - 101 mmHon oil Container content: 45.5 lPower of the spindle motor: 0.5 hpPower of the power stroke motor: 0.25 hpTotal power: 1.59 hpDimensions: 1370 x 1070 x 1440 mmvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Honing machine make DELAPENA type Speedhone ESer. -No: 109002 built in 1990Bore diameter at aut. U. SEMIAUTO. Honing: 3 - 20 mmDiameter range for honing by hand: 1.2 - 79 mmSpindle speeds infinitely variable: 375 - 1500 rpmand: 250-1000 rpm.Speed of the working stroke stepless: 43 - 380 H / minStroke length between: 0 - 101 mmHon oil Container content: 45.5 lDrive power: 4.5 kWDimensions approx: 1370 x 1070 x 1440 mmWith- Supply and discharge deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bearing number: 3694 HONING MACHINE Manufacturer: PLEIGER, Type: B - 290 Year of construction: 2002 Specifications: honing length 10000 mm workpiece size dia. 355 mm Min. Max. Honing Dia. 290 mm Length: 27,000 mm, Høhe: 10,000, Width: 2,000 mm, Weight: 30,000 Kg

honing diameter:10-120 mm stroke:350 mm honing length max.:700 mm spindle turning speed - stepless:80-1500 1/min Used Honing Machine Make: Nagel Type: PV-150/VS8-35LA 287032 YOM: 1993 Technical data: Z-spindle stroke 350mm Z-slide stroke 1500mm Cross slide travel: ± 60mm Longitudinal travel 1800mm Swivel table at 0/30/45 spline fixed Rotating speed 80-1500 U/min Variable flushing ring of 60-105 mm Control MS-U2 99 diverse Programmes Tool control hydraulical/EMZ/ Makroform Dimensional control via air measurement Still under power, fully functional

honing diameter: 12 mm stroke: 40 mm throat: mm total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m 3 spindle honing machine with in process measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal honing machine MAUSER Honing capacity: Ø 100 mm max x Length 6000 mm Voltage: 380 V Length: 14000 mm Width: 1000 mm Total height: 1000 mm Machine in 2 parts

Horizontal honing machine / cross grinding machine make SUNNEN type MBC 1804Fabr. -No: 87881 built in 1987to edit holes of any kind with Drm. between 1.5 - 140 mm andLength up to 400 mmDiameter range: 1.5 - 51/95 mmDiameter range for manual operation: 1.5 - 150 mmLength range through holes for measuring control: 255 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0 Passage u. Blind holes without gauge: 410 mm11 spindle speeds: 200 - 2500 rpm.5 stroke rates: 80 - 310 H / minDrive power spindle: 0.75 kWxa0xa0xa0 Stroke: 0.37 kWxa0xa0xa0 Oil pump: 0.37 kWCompressed air requirement: 0.8 m3 / at 6 barMains connection: 380 V, 50 HzDimensions L x W x H: 1610 x 1600 x 1575 mmWeight approx: 530 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Error ...

Vertical honing machine make KADIA type VPH 120/350Fabr. -No: 75241 Year 1975Stroke length: 350 mmMax. Diameter: 25 - 150 mmTable size: 350 x 700 mmPinole diameter: 85 mmInstallation height: 1000 mmDischarge: 300 mmDrive power: 4 kWDimensions L x W x H: 800 x 1400 x 2500 mmWeight approx. 4000 kgWith- separate hydraulic unit- Cooling devicelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), this machine is currently under complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible

Description: NAGEL VL15-700 PT Vertical Long Stroke Honing Machine with a stroke length of 7 metres and shuttle table. Control Honspindelsteuerung NAGEL MS-U3 Honspindel Anzahl der Spindeln: 1 hydr. Hublänge: 50 - 7000 mm Hubgeschwindigkeit (stufenlos) max.: 25 m/min Werkzeuganschluss: 65 mm Spindeldrehzahl (stufenlos): 30 - 280 U/min Hubantriebsleistung: 22 kW Spindelantriebsleistung 15 kW Messgerät Zeitautomatik (elektromechanische/elektrohydraulische Stufenerweiterung)  ,Gesamtdaten Hydrauliktank: 1250 l Gesamtanschlussleistung: 68 kW Bitte schauen Sie sich unser Maschinenvideo und die Dokumentation im PDF an. Werkzeuge sind nicht Bestandteil des Artikels. stroke: 50-7000 mm, control: NAGEL MS-U3, turning speed range: 30-280 rpm, feed range: 0-25000 mm/min, total power requirement: 68 kW, weight approx.: 25,000 kg, Approx. Onsite Dimension. (l x w x h) ...

Horizontal Honing Machine SUNNEN MBB-1600 EMS Spindle speed: from 200 to 1600 RPM Mini bore diameter: 8 mm (see photo technical details) Diameters: from Ø 1,5 mm to Ø 165 mm Maxi stroke length: 400 mm Voltage: 220 V Tri Width: 1000 mm Depth: 1100 mm Total height: 1800 mm Weight: approx 400 kg

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 2.5 mm Max. diameter: 12 mm Max. honing length: 40 mm Number of spindles: 1 Spindle speeds: from: 800 rpm up to: 4000 rpm Total stroke: 4 - 40 mm Stroke speed: from: 10 s/min up to: 450 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 kW Machine´s weight about: 1700 kg Overall dimensions machine: Length: 2000 mm Width: 1300 mm Height: 2400 mm Various accessories: Coolant system Measuring device

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 2.5 mm Max. diameter: 12 mm Max. honing length: 40 mm Number of spindles: 1 Clamping pressure: 30 bar Spindle speeds: up to: 1600 rpm Total stroke: 4 - 40 mm Stroke speed: from: 10 s/min up to: 450 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 kW Machine´s weight about: 1700 kg Overall dimensions machine: Length: 2000 mm Width: 1300 mm Height: 2400 mm Various accessories: Coolant system Measuring device Rotary table with 4 positions Déclanchement à deux mains

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 12 mm Max. diameter: 45 mm Max. honing length: 250 mm Number of spindles: 1 Distance spindel / columns: 300 mm Table length: 1000 mm Table width: 350 mm Spindle speeds: from: 220 rpm up to: 1030 rpm Total stroke: 350 mm Stroke speed: up to: 1080 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 2750 mm Various accessories: Active control

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Stroke speed: number (steps): 5 from: 80 s/min up to: 310 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 450 kg Overall dimensions machine: Length: 1500 mm Width: 1300 mm Height: 1600 mm Various accessories: Coolant system Automatic workpiece honing unit

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Total stroke: 80 - 310 mm Stroke speed: number (steps): 5 from: 80 s/min up to: 310 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 530 kg Overall dimensions machine: Length: 1830 mm Width: 1250 mm Height: 1700 mm Automatic workpiece honing unit

Spindle speed range, graded 200 - 1,600 rpm Hon diameter 1.5 - 165 mm Power of the spindle motor 0.37 kW Honöltank 60 l Dimensions B / T / H 1.1 m / 1.2 m / 1.55 m Machine weight about 350 kg

Tool, spare part, accessories

workpiece diameter: 125 mm module: 4 Control: SIEMENS 840 C x-axis: 105 mm y-axis: 40 mm z-axis: 500 mm total power requirement: 47 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,6x2,1x3,1 m with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 5-10 mm stroke: 40 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 station rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...

honing diameter: 110 mm stroke: 150 mm throat: mm total power requirement: 2,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 240 mm centre distance: 0 mm honing length max.: 500 mm max. module: 5 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 20 mm Max. diameter: 200 mm Max. honing length: 1000 mm Number of spindles: 2 Distance spindel / columns: 300 mm Table length: 1200 mm Table width: 500 mm Spindle speeds: stepless from: 5 rpm up to: 155 rpm Total stroke: 1000 mm Stroke speed: from: 2 m/min up to: 24 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 11 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 4000 mm Width: 4000 mm Height: 3800 mm Various accessories: Coolant system Set of arbors Set of grinding stones

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 140 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.37 kW Machine´s weight about: 400 kg Various accessories: Coolant system Automatic workpiece honing unit

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 102 mm Spindle speeds: stepless from: 200 rpm up to: 3000 rpm Total stroke: 6 - 170 mm Stroke speed: from: 60 s/min up to: 500 s/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 4.1 kW Compressed air from: 5.5 bar Machine´s weight about: 725 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1900 mm

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 102 mm Spindle speeds: stepless from: 200 rpm up to: 3000 rpm Total stroke: 6 - 170 mm Stroke speed: from: 60 s/min up to: 500 s/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 4.1 kW Compressed air from: 5.5 bar Machine´s weight about: 725 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1900 mm

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 102 mm Spindle speeds: stepless from: 200 rpm up to: 3000 rpm Total stroke: 6 - 170 mm Stroke speed: from: 60 s/min up to: 500 s/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 4.1 kW Compressed air from: 5.5 bar Machine´s weight about: 725 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1900 mm

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 102 mm Spindle speeds: stepless from: 200 rpm up to: 3000 rpm Total stroke: 6 - 170 mm Stroke speed: from: 60 s/min up to: 500 s/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 4.1 kW Compressed air from: 5.5 bar Machine´s weight about: 725 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1900 mm

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 25 mm Max. diameter: 90 mm Max. honing length: 250 mm Number of spindles: 1 Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1400 mm Width: 1200 mm Height: 2600 mm

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 10 mm Max. diameter: 70 mm Max. honing length: 300 mm Spindle speeds: number (steps): 6 from: 50 rpm up to: 1200 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 3.20 kW Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1200 mm Width: 1900 mm Height: 3200 mm Various accessories: Coolant system Set of arbors Set of honing stones

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 600 kg Overall dimensions machine: Length: 1400 mm Width: 1200 mm Height: 1600 mm Various accessories: Coolant system Automatic workpiece honing unit

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.52 mm Max. diameter: 80 mm Spindle speeds: stepless from: 250 rpm up to: 1000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.40 kW Machine´s weight about: 300 kg Overall dimensions machine: Length: 1100 mm Width: 920 mm Height: 1400 mm Various accessories: Coolant system

Technical data Min. diameter: 1.1 mm Max. diameter: 79 mm Spindle speeds: stepless from: 200 rpm up to: 2500 rpm Total stroke: 0 - 155 mm Stroke speed: number (steps): 12 from: 60 s/min up to: 350 s/min from: 12 m/min up to: 150 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.5 kW Various accessories: Automatic workpiece honing unit Loading roboter Pick-up device

Operating hours: 5240 Technical data Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 - 7 bar Machine´s weight about: 200 kg Overall dimensions machine: Length: 850 mm Width: 800 mm Height: 1900 mm

Operating hours: 9132 Technical data Min. diameter: 3.89 mm Max. diameter: 32 mm Max. honing length: 8 - 150 mm Spindle speeds: stepless up to: 5000 rpm Stroke speed: from: 75 s/min up to: 500 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 5.3 kW Machine´s weight about: 1320 kg Overall dimensions machine: Length: 2100 mm Width: 1830 mm Height: 2200 mm Various accessories: Automatic workpiece honing unit

Operating hours: 1424 Technical data Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 - 7 bar Machine´s weight about: 200 kg Overall dimensions machine: Length: 850 mm Width: 800 mm Height: 1800 mm

Honing diameter maximum: 165 mm Honing diameter minimum: 1 mm Stroke length: 400 mm Number of honing heads: 0   MAKE   SUNNEN TYPE     1804 YEAR    80 er DIMENSIONS Length   1830 mm Width    1250 mm Height   1700 mm min diameter : 1,5 mm max diameter : 165 mm max. length : 400 mm Speeds : 2500 RPm

Stroke length: 600 mm Honing diameter range: 3 - 90 mm Spindle drive: Servomotor RPM, max: 4500 1/min Torque: 60 Nm Stroke drive: Ball screw Stroke speed, max: 40 m/min Stroke acceleration, max: 25 m/s? Gehring precision honing spindle, 6 stations round table, Gehring digital honing control, incl. fault diagnosis, with free programmable controller Siemens S7-300. Spindle feed EMZ-F,

SUNNEN sanding strip carrier used Price on request

Hoehn machine - Cross grinding machine Sunnen ML 3500 (similar to ML5000) complete with external tank with paper filter and magnetic separator The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools Italy

Inv. Num. : 6549 Type: KS 1800-10 Producer: Gehring Generated: Parameters: Honing diameter: 10 mm Machining length: 1800 mm

Manual horizontal honing SUNNEN type MB 625 DE Rotation: 30 / 450 / 650 / 800 RPM Voltage: 220 V mono Width: 600 mm Depth: 1000 mm Total height: 1600 mm Weight: approx 100 kg Delivered without honing tools

Key data: 165 mm, 406 mm

Diameter range with manual lifting movement 1.5 – 165 mm with automatic lifting movement 1.5 – 95 mm (optionally with cross-grinding device KKN-100) Workpiece weight max. 2.7 kg Stroke length up to 406 mm Spindle speed range, stepped 200 – 2,500 rpm Spindle motor power 370 W Machine weight with coolant and finger device 306 kg Dimensions L/W/H 1,524 mm / 813 mm / 1,600 mm

weight of the machine ca.:1 t dimensions of the machine ca.: 2 x 2 x 2 m

honing diameter:22/56 mm stroke:500 mm cycle time:40 sec Vertical Honingmachine - connecting rod (conrod) OEM Line.

honing diameter:90 mm stroke:600 mm ConRod