homogenizer used for sale

APV Homogenizer LAB 100 Ball valves Technical data see also pictures: Type: 100-6 TBS Capacity: 100 LTR. / h Engine: 2.2 KW

Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.

1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug

Vakumix continuous homogenizer in the design and mobile on rollers. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 CW: 30 Suction device front side DN25 for sucking in liquids. NEW: Control, inverter, all seals incl. mechanical seal. The flow homogenizer is PLC controlled. Delivery time approx. 4 weeks.

Inline Homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is used for the production of emulsions and suspensions with a wide range of viscosity.

Homogenizer IUL instruments masticator modell: µ-Prozessor technical details: engine: induktion rotation speed: 500 - 1500 rpm speed increaser: 1:6 strokes/Sec.: 3.0 - 8.5 / 50 Hz 3.0 - 9.9 / 60 Hz voltage: 230 Volt ; 50 Hz / 110 V ; 60 Hz Leistung: 270 Watt dimension: l x w x h: 420 x 262 x 322 mm weight: 20 kg

Used laboratory vacuum homogenizer made by PT-MASZ (Poland), model HP-5. New 2008. Working capacity Vr = 5 L. Main motor power of 2.2 kW. Specifications HP-5: - Performance: by. needs laboratory - The capacity of the main tank: V = 5 L - Vacuum: ~ 0.05 MPa - Power supply: 3x400 V, 50 Hz Dimensions: - Length: 750 [mm] - Width: 650 [mm] - Height: 1200 [mm]

Homogenizer for: - milk - milk drinks - cream - fruit & juices - egg mass - ice mixture - oil – water emulsion - parafin – water emulsion capacity: 5000 dcm3/h 220 bar 30 kW temp: 85C

2-stage high-pressure homogenizer; 3 pistons, complete with pulsation dampers and hydraulic pressure control; Disassembled/ready for transport

2 Step Aseptic High Pressure Homogenizer; 5 pistons complete with pulsation dampers and hydraulic pressure control; Disassembled/ready for transport

Te Koop Homogenizer Tetra Pak Type: Tam25 / 100 bar 1999 Bouwjaar Voor meer informatie kunt u bellen of mailen wh.derikx@gmail.nl Tel: +31620758459 De nu kopen prijs is excl.21 % btw

Homogenizer LAB 12.50H, SN.1-84.195 Flow Rate 100 l/h at max. 600 bar Single-stage homogenizing valve with manual adjustment poppet valves, Main motor 2.2 kW, 400V, 50Hz

Laboratory homogenizer,LB 400 for 50-400 ml test bags with timer function.

Homogenizer,stainless steel,Gaulin M3PS,2 stage,15 kW motor,Capacity 1400 l/h.

Homogenizer,Stainless steel,Rannie Lab 12.50,

Homogenizer,stainless steel,APV/Gaulin 15M,2-stage 57 l/h.

Lowpressure homogenizer,stainless steel,Gaco type AL-70

Homogenizer,stainless steel,Rannie,model 12.56 VH. Capacity 40-120 l/h.,Max pressure 1.500 bar.

Low pressure homogenizer,stainless steel,Gaco type AL

Low pressure homogenizer,stainless steel,Gaco type AL

Low pressure homogenizer,stainless steel,Gaco type M60.

Low pressure homogenizer,stainless steel,Gaco type 2.

Low pressure homogenizer,stainless steel,Gaco type AL

Low pressure homogenizer,stainless steel,Gaco Senior 26

Inline homogenizer,stainless steel,Brogli type Cryo Mix. 2,16/3,2 kW motor,1435/2860 rmp.

Inline homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Power 22 kW, litre output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing

Inline homogenizer Manufacturer Koruma Type DIL 160 Power 22 kW

Inline homogenizer with high shear force Manufacturer BWS Technologie GmbH Type Supraton S 200 Year of construction 2000 Material wetted parts 1.4462 Double-acting mechanical seal Motor explosion-proof Power 28 kW, capacity per litre max. 12,000 l/h Suitable for dispersing, emulsifying and homogenizing

Inline homogenizer Koruma Type 120 with star triangle circuit

STORk RHO40 Homogenisator. 3800 l/hr, 250 Bar, eine stufig. ausgestattet mit dem hydraulischen bedienten Drehende homogenisierventil. völlig wieder instand gesetzt, sehr gutem Zustand.

Powder injection dispersion system Type: PID-PAJAM No.: 0212 1140 Year of construction: 2003 High-quality system for dispersing extremely difficult aufschließbarer thickener, stabilizer, gelling agent, etc. fully automated system Dimensions: LWH = 800 x 1200 x 1700 Weight: 300 kg New price: 55 000 EUR

Used laboratory homogeniser manufactured by Brogtec. Model MH8. Year of construction 1992. Capacity 8 L. Pressure: tank 2 bars, jacket 3 bars. Working temperature: tank - ATM, jacket 32 ° C. Chamber dimensions: height 22cm, inner diameter 24.5cm.

Y.O.M.: 2002 Factory No.: 02050057 Power: 500 l/h, motor: 22 kW Pressure: 1000 bar as good as new with manual Dimensions LWH: 1400 x 1000 x 1250 mm Weight: 900 kg

Manufacturer: Alfa Laval Type: SH30 A Capacity: 6000 kg/h Engine: 110 kW Pressure: 250 bar Piston diameter: 50 mm

Manufacturer: APV Model:Multi BT 30.60 Function: Homogeniser Capacity: 1200-2000 litres/per hour Working pressure: 200 bar Single stage manual homogenising valves Dimensions (Per Unit) Length: 135 cms Width:80 cms Height:140 cms Approx. Weight:1500Kgs Condition: Good and visible under power Year of manufacturing: 1995 Power of the moto: 15,6 kW Control box included. Pistons made of stainless steel.

Icecream Homogenizer YOM 1996 Only used for 1 year 160l/h, 180 bar Very good condition

General SKU354T972 LocationBarneveld MakeYtron TypeYTRON-Z 5,5-2.FC.60.3 Inline homogenizer No.8807631 Year of construction1988 Pressure Working pressure10 Bar Main Features MaterialStainless steel Motor5.5 KW Rotor55 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesdia. 55 mm Inlet36 mm Outlet26 mm Number of stages:3 Capacitymax 2500 Ltr./h With mechanical sealcheck Motor5,5 kW 380 Volt Rotor speed2915 rpm MaterialStainless steel 1.4541 (321) Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight190 kg Floorspace1x0,9 m Total height1,3 m Extra information .Inline high shear mixersYtron ProcessMixers > Inline high shear mixersBrand > Ytron Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished "scotch brite" type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressu ...

Farm Dairy Milk and Cream Pasteur Machines were completely overhauled in 2015 and are in very good condition. Included. - Milk pasteurizer GEA 1000 liters/h (continuous pasteurizer 93% heat recovery) incl. pumps, control, Temperature Recording - Homogenizer Spomaz 1000 liters/h - Seithal centrifuge 1000 litres/h - 2x Coolable buffer tanks (whole milk, low-fat milk) - Cream / yoghurt pasteurizer GEA 300 litres/h (continuous pasteurizer) with Electric heating incl. pump control Temperature recording - Homogenizer Spomaz 300 liters/h - Buffer tank 600 liters - 2x yoghurt tank 600 litre double jacket heating and cooling bar - Manual CIP basin - Siemens S7 for controlling the dairy. - various coupling panels, butterfly valves, leakage disc valves, Pipelines, etc... - Large cooling unit for cooling the pasteurizer and storage tank - 3000 litre cooling water  ...

Homogenizer Tetra Pak Description Homogenizer Tetra-Pak Production 27.000 l/h available documentation and CE mark. Features Model: SHL 40 A 200 BAR Year: 1995 Weight: 6.000 Kg Width: 1´75 M Height: 2´20 M Large: 2´40 M

Line is suitable for production: - Different nut (almond, hazelnut etc.) milks - Soya milk - Seeds (hemp, poppy etc.) milks - Different non-carbonized soft drinks (juices, lemonades etc.) - Cow milk (powder milk) Equipment: 1) Nut cleaning and soaking tanks 2) Nut peeler 3) Nut/beans/seeds mill 4) Milled nut/beans/seed filter 5) Product emulsification tank (with heating) 6) Buffer tanks 7) Homogenizer 8) Pasteurizer 9) Filler 10) CIP station Line capacity: •Almond nut peeling machine – 150 kg/h •Nut colloid mill – 150 kg/h •Homogenizer/pasteurizer capacity – 500 liters/h •Semi manual filling machine – 300-400 bottles/h Line in dismantled and packed into 45HC feat container (container includes in price). All wiring and pipeline includes.

Complete farm dairy for filling milk, yoghurt and butter with fully automatic fillers for gable boxes with screw caps and 95mm yoghurt pots Machines were completely overhauled a few years ago and are in very good condition. Included are: - Milk pasteurizer 1000 liters/h (continuous pasteurizer 93% Heat recovery) including pumps, controls, temperature recording - Homogenizer 1000 liters/h - Centrifuge 1000 liters/h - 2x coolable buffer tanks (whole milk, low-fat milk) - Nimco 550 milk filler with screw cap applicator. Output max. 2500 packs/h, currently set to 1500 packs/h - Cream / yoghurt pasteurizer 300 liters/h (continuous pasteurizer) with Electric heating including pumps, controls, temperature recording - Homogenizer 300 liters/h - Buffer tank 600 liters - 2x yoghurt tanks 600 liters double jacket heatable and coolable - yoghurt pump (worm pump) - Yoghurt filler ...

Used GEA Niro Soavi Model Ariete NS3015 H stainless steel homogenizer. Capacity approximately 200 liters/hour (528 US gallons per hour) at maximum pressure 1500 bar (21755 PSI), 1-stage, 3 pistons. Pump valves material: Tungsten Carbide (WC), plungers material: solid ceramic. Homogenizer is driven by an electric engine 15 kW/400V/50 HZ. Overall dimensions 1120 mm (length) x 1350 mm (width) x 1500 mm (height). Weight : 1300 kg. Manufactured 2014.

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

Process plant Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only run in the laboratory Capacity usable volume 125 l, pharmaceutical version Product room vacuum- and pressure-resistant -1/+2 bar, operating temperature 133 °C Flameproof boiler room 4 bar, operating temperature 165 °C Wiper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation in French, Promas manual, various CDs Documents with FAT, IQ, OQ

Used Gea Niro Soavi homogenizer model NS 3110/90 H, Ariete version. Year of construction 2006. Technical details: Manufacturer: GEA Niro Soavi Model: Ariete NS3110/90H Type: Piston homogenizer Viscosity : < 200 cP Operating temperature: < 80°C Execution : Sanitary / aseptic Max. capacity: approx. 10,000 L/h Flow rate: variable Maximum back pressure: 20 bar Motor power (supply required): 90 kW Number of stages / homogenisation level: 2