hoist 10 used for sale

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Electric chain hoist with: chassis -Load capacity: 250 kg -Main stroke: 8 m/min -Fine stroke: 2.4 m/min -Hakenweg: 3.4 m -Dimensions: 385/500/H800 mm -Weight: approx. 40 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 500 kg -Lifting speed: m/min -Lifting height: 3.8 m -with: service -Dimensions: 580/330/H490 mm -Weight: 100 kg

Lever hoist, ratchet hoist HEIDKAMP, YALE Model D 85 load capacity: 6000 kg stroke: 1500 mm chain size: 11 x 31 chain length: 3000 mm load hook: TY16 load trains: 2 used, tested ! Dimensions ( Packaging ): 610 x 330 x 230 mm

Chain hoist with motorized chassis for steel beams, load capacity: 1,000 kg, lifting speeds: 5.4 m/min. (fast); 1.4 m/min. (slow), incl. hallway operation, without steel beams. Brakes and drives workshop overhauled / tested.

Electric chain hoist with travel motor for steel beams, hoisting capacity: 1.000 kg, hoisting speeds: 5,4 m/min. (fast); 1,4 m/min. (slow), incl. Pedestrian control, without steel beam. Brake and drives revised / function checked.

Mixing installation on steel construction with pan mixer (150 l. net capacity, 5,5 kW drive, 0,55 kW outlet), skip hoist (1,5 kW drive, incl. winch, rope and rails) and switchgear cabinet. In very good condition, hardly used after full refurbishment.

Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

E-chain hoist crane DEMAG type PM 12LF Manulift Fabr. No. 5877813 Year of construction 1990 Payload 125 kg Hook travel 3.5 meters Lifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0,32 / 0,05 kW Mains connection 400 Volt, 50 Hz 1 load line = 125 kg Manulift hand control directly on the crane hook Good condition; used

E-chain hoist crane DEMAG type PK1N-F Fabr. No. 5533406 Year of construction 1983 Payload 125 kg Hook travel 3.8 meters Lifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length control bottle approx. 1.2 meters 1 load line = 125 kg mains connection 380 Volt, 50 Hz Weight: 25 kg good condition; used

Hoist arm of 2,500 kg. Brand: Konecranes. Year: 2014.

Electric trolley, electric trolley for chain hoist, crane trolley, chassis, rolling trolley for double T-beam STEEL type GU-A035400 Fab.Nr. 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roll diameter approx. 80 mm Track width from 65 mm to 110 mm Travel speed 12.5 m/min Motor power 0.42 kW Mains connection 380 volts, 50 Hz. Weight 20 kg good condition; used

Electric chain hoist STEEL R 2 ( R2 ) Payload: 50 kg Lifting speed: 8 m/min voltage 380 V used, tested ! Dimensions: 420 x 370 x 300 mm

Chain hoist STEEL T 302 S Year: 1980 Capacity: 250 kg Lifting speed: 24 / 4 m/min used, tested ! Dimensions: 880 x 500 x 300 mm Weight: 56 kg

Hoist chain PAGUS 8 x 24 mm ( 8x24mm ) 008 Length: approx. 11 m New ! Dimensions (packaging): 270 x 160 x 150 mm

Hoist chain PAGUS 7.1 x 21 mm ( 7.1x21mm ) F62 Length: 5 m New ! Dimensions (packaging): 230 x 150 x 130 mm

Chain hoist, trolley HADEF TYPE 66 / 04 29 / 06 ER ( 66/0429/06ER ) Payload: 9400 kg Chain length: approx. 6500 mm Lifting speed: 2,2,8 / 0.7 m/min beam mount adjustable: max 330 mm motor: 1.4 / 5.5 KW 400 V new motor 2130,- € ! without control ! used, checked ! Dimensions: 1450 x 1220 x 950 mm

Chain hoist with trolley, trolley DEMAG TYP DK2-250-K-V-F4 Bj: 1992 Payload: 500 kg Lifting speed: 4 / 1 m/min hook travel: 3 m Control cable: 1,, 5 m Voltage 380 V IP55 Chassis: RU 6 DK Flange width: 140 - 200 mm used, tested ! Dimensions: 500 x 300 x 600 mm

Chain hoist, trolley with trolley with trolleywrk BALKANCAR TYPE M B051D ( MB051D ) Year: 1969 Payload: 125 kg chain length: approx. 3.7 m Lifting speed: 8 m/min voltage: 220 / 380 V used, tested ! Dimensions: 400 x 250 x 200 mm

Chain hoist SWF SK@0802203 Year: 2007 Load capacity: 180 kg Chain length: 6 m lifting speed: 2 / 1 m/min engine: 0.2 / 0.05 KW 400 V without control panel ! used, tested ! very good condition ! Dimensions: 320 x 200 x 360 mm

Column-mounted slewing jib crane, wall-mounted jib crane PAGUS Lifting capacity 500 kg Projection: 2000 mm Clear height: 3000 mm total height: 4000 mm < br /> electric chain hoist with rolling chassis BALKANCAR BO62 MD Load capacity: 250 kg Lifting speed: 0.066 / 0.066 / 0.0 02 m/s lifting height: 3200 mm 380 V used, tested ! Transport dimensions: 4000 x 600 x 1000 mm

Chain hoist with electric chassis, trolley PFAFF SILBERBLAU Type PL10 2004B1 Capacity: 2000 kg Lifting height: 3,3,000 kgbr /br /lifting height: 3,000 kgbr /br /lifting height: 3,3,2004B1br /br / 0 m Lifting speed: 4 / 1 m/min Electric chassis type CHM20 Travel speed 20 m/min 1.75 / 0.45 kW voltage: 400 V 3AC, 50 Hz IP55 used, tested ! Dimensions ( without cable ): 650 x 450 x 730 mm

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,00 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 6.3 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Chain hoist VETTER KRANTECHNIK type SIcc1F Load capacity: 125 kg Lifting height: approx. 6 m ( chain length ) Lifting speed: 8,00 0 / 2.0 m/min load chain: 3.1 x 9.3SP connected load: 0.20 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.2 m cable approx. 7.9 m Mains connection cable used, tested ! Dimensions ( without cable ): 380 x 260 x 450 mm

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,, 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 10.5 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,, 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 8 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Chain hoist VETTER KRANTECHNIK Type SIXX1F Load capacity: 125 kg Lifting height: approx. 5 m ( chain length ) Lifting speed: 8,, 0 / 2.0 m/min load chain: 4.2 x 12.2 connected load: 0.18 / 0.05 kW voltage: 400 V 3AC, 50 Hz IP55 control bottle with approx. 3.6 m cable approx. 8 m mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Chain hoist DEMAG Type DC-COM 1-80 1/1 H5 V8/2 Load capacity: 80 kg lifting height: approx. 5 m ( chain length ) lifting speed: 8,, 0 / 2,0 m/min Load chain: 4,2 x 12,2 RDC/TDK engine type: ZNK 71 A 8/2 0.18 / 0.05 kW Voltage: 380 - 415 V 3AC, 50 Hz IP55 control bottle with approx. 3.2 m cable approx. 21 m Mains connection cable used, tested ! Dimensions ( without cable ): 430 x 280 x 400 mm

Chain hoist, trolley, with rolling chassis BALKANCAR TYPE B051M Payload: 125 kg chain length: approx. 3,3,0 m Lifting speed: 2.4 / 8 m/min Voltage: 380 V 3AC 50 Hz approx. 6.0 m Control cable with bottle approx. 5.5 m Connection cable roller landing gear for beam width: 50 - 100 mm used, tested ! Dimensions: 650 x 440 x 250 mm

Chain hoist, trolley, with rolling trolley BALKANCAR TYPE B052MP Payload: 250 kg chain length: approx. 3.0 m lifting speed: 2.4 / 8 m/min voltage: 380 V 3AC 50 Hz ca.5.0 m Control cable with bottle roller trolley for beam width: 50 - 100 mm used, tested ! Dimensions: 650 x 440 x 240 mm

Hoist chain, with chain storage STAHL 9 x 27 mm ( 9x27mm ) length: approx. 9.5 m chain storage: 160 x 160 x 350 mm hanging strap: 40 mm suitable hook harness see KZ108 ! used, tested ! Dimensions ( packaging ): 160 x 160 x 410 mm

Electric chain hoist - see photos for details

Electric chain hoist, crane, indoor crane, assembly crane -Load capacity: 125 kg -Main stroke: 8 m/min -Hakenweg: 5 m -Control switch -Weight: 25 kg

Indoor crane, crane, electric rope hoist, hand trolley, roller trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Manufacturer: steel, crane chassis with electric cable pull -Cable: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Specifications: - Load capacity 500 kg - Projection approx. 4000 mm - Hackenweg approx. 3000 mm - Swivel radius approx. 180 ° - Crane boom IPE 240 - Total height with brackets approx. 1250 mm - Console width approx. 200 mm - Total length approx. ca. 4500 mm - Hoist: Make: STEEL Type: R 6 - Lifting speed approx. ca. 1.5 / 6.0 m/min -one. Trolley chassis -one. Swivel the boom - Operation via pendant switch - Drive 400 V - Total weight approx. 400 kg

Description: Professional electric chain hoist Maximum capacity 500 kg. Voltage 230 volts. Maximum lifting height 300 cm. Lifting speed 280 cm per minute. Chain diameter 6,3 mm. Approx. Onsite Dimension. (l x w x h): 500 x 350 x 600 mm, weight approx.: 20 kg

Description: The rope hoist is supplied as standard with: Bracket for suspension Remote control with up / down. Emergency stop. Load capacity in kg 800/400 kg Stroke 6/12 mm Lifting speed 5/8 m / min Power 1.25 kw Connection voltage 230 V. Weight 21 kg Dimensions L x W x H 420 x 180 x 280 mm Approx. Onsite Dimension. (l x w x h): 420 x 180 x 280 mm, weight approx.: 21 kg

Description: Professional electric chain hoist Maximum capacity 300 kg. Voltage 230 volts. Maximum lifting height 300 cm. Lifting speed 300 cm per minute. Chain diameter 5 mm. Approx. Onsite Dimension. (l x w x h): 400 x 200 x 600 mm, weight approx.: 15 kg

Description: Crane runway length approx. 7000 mm, SWF hoist unit type CA1-045.2P-F, year of manufacture 2017, load capacity 500 kg Approx. Onsite Dimension. (l x w x h): 7,000 x 600 x 500 mm, weight approx.: 220 kg

Cable HYSTER 0342960 Bremsseil 1339917 Accelerator Pedal Pull New ! Dimensions ( Packaging ): 300 x 300 x 70 mm

Cables, Cable, Brake Cable, Cable Break, 3 pieces HYSTER 0342959 Bremsseil 1350029 Bremsseil RH 1350028 Bremsseil LH New ! Dimensions ( Packaging ): 300 x 300 x 70 mm

Load capacity 1,6 t , Fast lift - slow lift , Chain length approx. 5.5 m, Driving speed is determined by button pressure strength, Crane re-checked by a specialist company! Function video via Whats App possible!

Brand: Abus Kran Systeme Type: GM1 250.6-111 Model: S13371 Serial Number: D780103/0009 Construction year: 1997 Weight: 40 kg Power: 50Hz Lifting capacity 250 kg Length mm: min 400mm - 5000 Width mm: 400 Height mm: 400 Working height: variable Maximum speed: 1.5/6.0 m/min Condition machine : Used Electric. Connection: 16A

Palettenheber / Pile Hoists - Stack Lift Baumann NU-FO Baujahr / Year 1989 - Serial-No. 51587 Format / Size max. 1100 x 800mm Hebekapazitaet / Loading capacity max. 1000KG Hubhoehe / Lifting height max. 1000mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazitaet / Loading capacity max. 1600KG Hubhoehe / Lifting height max. 1400mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Used pallet rack - approx. 3.500 x 14.100 x 1.100 mm - heavy duty rack shelf Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as almost ...

Used pallet rack - approx. 5,000 x 14,100 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Used pallet rack - approx. 5.000 x 14.100 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as  ...