HEILBRONN used machine for sale

Compressive force: 80 t Projection: 350 mm Table size: 700 x 720 mm Diarrhoea level in table: 160 mm Plunger area: 300 x 445 mm Plunger adjustment: approx. 80 mm Stroke adjustment: 8 - 100 mm Stroke rate: approx. 90 rpm Drive motor: 380 V, approx. 5 kW Dimensions: 2050 x 1100 x 2450 mm Weight: approx. 3800 kg

Key data: 75 t, 80 mm, 250 1/min

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

Pressing force 50 ton Stroke 8 - 100 mm Max. stroke rate 140 strokes/min Drive power 3 kW Clamping surface 650 x 500 mm Machine weight approx. 2,750 kg

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures

Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton

Punching force: 75t, with Band Feeder GSW WV32/80, max. band width: 320mm, max. band thickness: 3.5mm, roller diameter: 80mm, an inspection is possible.

Pressure capacity: 500KN, stroke: 8-100mm, stroke rate: 100/min. Ram adjustment: 80mm, drive: 4kW, weight: 2850kg. Safety distance: 175mm, overtravel: 53mm, overtravel time: 110ms.

pressure:080 t throat:300 mm stroke:7 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:450 mm table surface area:720 x 600 mm hole in the table:300 x 120 mm table height over floor:850 mm ram surface:400 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:6,5 t dimensions (WxDxH):1,2 x 2,0 x 2,9 m German Safety: permitted for manual loading:CE-sign light guard:Sick clutch:hydraulic overload protection in ram:hydraulic ram adjustment:motoric stroke adjustment:automatic

pressure:160 t throat:690 mm stroke:8 - 180 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1000 mm hole in the table:400 / 120 mm table height over floor:850 mm passage to the back:900 mm ram surface:1000 x 700 mm ram adjustment:130 mm power requirement:11,0 kW weight:19,0 t dimensions (WxDxH):2,4 x 2,8 x 3,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

pressure:100 t throat:350 mm stroke:6 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:850 x 700 mm hole in the table:470 x 150 mm table height over floor:855 mm ram surface:450 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,0 t dimensions (WxDxH):1,5 x 2,3 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

Pressure:080 t throat:300 mm stroke:8 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:720 x 600 mm hole in the table:300 x 175 mm table height over floor:860 mm ram surface:400 x 270 mm ram adjustment:60 mm power requirement:7,5 kW weight:6,0 t dimensions (WxDxH):1,3 x 2,2 x 3,05 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure: 160 t throat: 440 mm stroke: 20-150 mm : 50 Hub/min : ca. 390 mm : 1300 x 750 mm : 170 mm : 400 / 250 mm : 50 mm : 445 x 560 mm : 7,5 kW : 8 t : 2,9 x 1,5 x 2,8 m total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 4717 Feed size: 500 x 3 mm Belt infeed height (with plate): 170 - 270 mm Additional device: 2-hand operation Table size: 1250 x 900 mm Plunger surface (blue): 800 x 600 mm Projection of ram center dimension stand: 510 mm Installation height center dimension (without plate): 500 mm Clamping plate thickness: 125 mm Trunnion Ø: 65 mm Smallest / largest stroke: 27 - 140 mm Number of strokes: 48 With electronic roller feed: Wanzke WVS 500 Indramat control system, serial no. 102414-1, year of manufacture 1998 With reel straightener: PBK RMC4 80/7/50 RSD GLST, serial no. BA00967, year of manufacture 2006 With minimum quantity lubrication: , Schmidt System 2000 Max. pressing force: 250 to, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 3,200 x 3,500 mm

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

pressure: 100 t throat: 350 mm stroke: 8 - 100 mm no. of strokes: 60 Hub/min daylight (stroke down, ram adjustment above): 300 mm ram adjustment: manuell 80 mm table surface area: 850 x 700 mm hole in the table: Dm. 180 mm mm ram surface: 560 x 400 mm ram drills x depth: 40 x 95 mm table height over floor: 850 mm total power requirement: 7,5 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 1,4 x 2,2 x 2,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic gripper feed make HEILBRONN type PVS 250/100/80Machine -No: 205238 built in 1993with attached strip straightener type RLE 27Technical specifications:CLIP FEEDmax.strip width: 250 mmmax.strap thickness: 3.0 mmFeed length range: 5 - 105 mmmax. material cross-section: 240 mm²Clamping force of the feed clamp: 17.2 kNcorresponding to frictional clamping force: 34.4 kNClamp tension force: 5.6 kNcorresponding to friction clamping force: 11.2 kNFeed force: 3.0 kNTAPE straightenermax.strip width: 200 mmmax.strap thickness: 2.0 mmNumber of straightening rolls: 7Diameter of the straightening rolls: 40 mmNumber of feed rollers: 2Diameter of the feed rollers: 40 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always avail ...

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 100 t throat: 350 mm stroke: 8-80 mm dayligth: 300 mm no. of strokes: 125 Hub/min ram - range of adjustment: 80 mm ram surface: 400x300 mm table surface area: 850x700 mm hole in the table: 350x200 mm total power requirement: 7.5 kW weight of the machine ca.: 4.5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.