136,828 used machines on RESALE, but how to find them? Machine Search
Tip-crimping machine for screw processing Year of manufacture 1983 Max. wire diameter: 6 mm Max. shaft length: 80 - 100 mm Capacity: 200 - 600 pieces/minute Both machines are in good condition
Year: 2002 New-exhibition machine, never used in production. - handle function - copying template - pneumatic profile mounting - centering device
Key data: 5 mm, 10 mm, 3160 mm
EBM edge banding machine KDP 111 SLK - built in 1991 -11.5 kW motor, banding from 0.8-5 mm, verst. Cross-cut knife (roll separation up to 3 mm) Rapid heating basin, HF cross-cut sawing unit, HF flush milling unit, HF chamfer or Radius milling unit, pull-out workpiece support, heated inlet ruler complete with 2-part sound insulation hood and central extraction - Good condition - Length approx. 3,160 mm Depth with roller plate approx. 1,230 mm Workpiece width, min. 90 mm Workpiece thickness, min. 10 mm Workpiece thickness, max. 50 mm Workpiece length, min. 260 mm -Operating instructions available
Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available
Copper-veneer assembly machine FW/J 920-Bj.95 -Front and rear wooden pads are no longer available - Instruction manual available
Kettle / vat for Kemper F 200 ASL Lifting Kneader Machines Bearing renewed / repainted Boiler has a blow / rebalancing Sale thus only as defective
Key data: 600 mm, 2000 mm
Weisser Heilbronn HEKTOR - Cycle CNC lathe - Bosch CC220 controller (in need of repair) - incl. tools & accessories - incl. operating instructions & technical documents - Built in 1992 Technical data: - Center width: 2000 mm - Tip height: 300 mm - Turning diameter over bed: 600 mm - Spindle bore Ø: 80 mm - Quill holder: MK5 - Bed width: 430 mm - Operating voltage: 400 V - Dimensions WxHxD: approx. 4700 x 2300 x 2100 mm - Weight: approx. 8000 kg
Diosna Hub Kneader Type: D 200 a Plus Technical data: with 2 stainless steel boilers Stainless Steel Lifting Arm - Welded extendable with flour dust cover Wear parts renewed once repainted Traces of storage
Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-50208-205
Kemper Lifting kneader extendable Type: F 200 ASL 2 speeds 2 stainless steel kettles Stainless steel lifting arm with flour dust cover 2x timers 2x speeds for max. 320kg dough Wear parts renewed and repainted Without sealing lid of the boiler
Case kit with riveter for threaded inserts complete with all accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-50208-343
Boku Spiral Mixer Type: SK 240 AK Technical data: Extendable spiral mixer for max. 240 kg dough with automatic timers digital display 2 speeds slow and fast Stainless steel spiral with 2 stainless steel boilers with flour dust cover Wear parts renewed and repainted
Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-50066-443
Manufacturer: Trumpf Model: TruLaser 3030 Year: 2021 Condition: Used Stock number: 9520 Laser ON: 36160 h Beam ON: 23760 h Laser power: 6 kW Work table length: 3000 mm Work table width: 1500 mm Source: TruDisk 6001
x-axis: 3060 mm y-axis: 1530 mm z-axis: 160 mm workpiece weight: 200 kg/m² traversing speed: 100 m/min weight: 12000 kg dimensions of the machine ca.: 10150 x 4050 x 2420 mm Combination laser, consisting of a flatbed laser and a tube laser Flatbed laser: Work table (mm) 3048 x 1524 Max. simultaneous speed (m/min) 141 Positioning accuracy (mm): 0.05 Repeatability (mm): 0.05 Laser power (kW): 3 Max. material thickness, carbon steel (mm): 16 Max. material thickness, stainless steel (mm): 8 Max. material thickness, aluminum (mm): 8 Configuration: - SIEMENS 840 D sl control system - Auto-Focus cutting head - IPG 3 kW laser source - Automatic shuttle table - Automatic verification of sheet size and position - Start position can be set using a laser diode - Automatic nozzle cleaning - Central lubrication Tube laser: Tube diameter: 25â400 mm Tube length: 3000 mm The data for this ad was crea ...
Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable 80 - 1170 rpm - 2 feeds 0.1 / 0.2 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - Right – Counterclockwise rotation - Keyless chuck 1-13 - Lighting
AGICOM Recycling Machine Trade The powerful and robust MAXI 100 cable peeling machine is ideal for processing cables with a diameter of 6 to a maximum of 90 mm. How do you peel cables? The two-knife system cuts open the cable insulation, and the copper or aluminum core can be easily removed. The cable peeling machine can be infinitely adjusted to all cable diameters via a hand crank. The cutting depth of the blades (cable sheath) is also adjustable and thus enables the processing of a wide variety of cable types (e.g. triangular wires made of high-voltage cables, cables with lead sheath ...) All-round intrusion protection CE Declaration of Conformity Manual in German Spare parts available! Cable diameter: 6 to 90 mm Number of blades: 2 Cutting speed: approx. 22 m/min Drive: 2 electric motors, 2 x 1.1 kW / 380V 50 Hz Dimensions: L 1850 x W 760 x H 1200 mm Weight: ...
SIMMECH SIMMFORM 2000 duct beader was built in 2009 in Poland by SIMMECH s.c. The machine is used is designed to shape reinforcing beads over entire sheet metal length. This type of machining increases the stiffness of the material and its resistance to deformation while maintaining a relatively low weight. The finished sheet metal can then be used for the production of profiled sheet metal components or subjected to further machining, including plasma cutting. The SIMMECH SIMMFORM 2000 is designed for machining sheet metal with a thickness ranging from 0,55 to 1,2 mm and a maximum width of 2050 mm. The beading process is performed by gradually forming the moving material using rollers. The maximum working speed is 11 m/min, and the drive is provided by a high-performance R57SKH90L4 geared motor with a power of 1,5 kW. The machine is operated manually, with the possibility of setting ...
BAIWEI BW-G3015 1,5 kW fiber laser was built in 2019 in China by ZHENGZHOU BAIWEI CNC MACHINERY SHARES CO., LTD. The machine, designed for the precise cutting of sheet metal with a maximum thickness of 14 mm is ideal for both unit and series production. Cutting is performed using a stable fiber beam generated by a RAYCUS 1,5 kW laser source. The fiber laser technology offers greater energy efficiency and higher performance compared to other cutting methods. The BAIWEI BW-G3015 is equipped with a RAYTOOLS cutting head with a range of useful features. The autofocus automatically adjusts the focal position to the thickness of the material being machined. An anti-collision system detects obstacles, reducing the risk of the head colliding with the workpiece. These solutions enable efficient cutting while maintaining a high level of machining accuracy. All process parameters are programm ...
STIGAL VXstandard plasma-gas cutting machine was built in 2013 in Poland by STIGAL Marcin Stępień. The machine is used for the precise cutting of large-size sheet metal with a maximum length of 7 metres and a width of 2 metres. The use of both a gas and a plasma torch allows the cutting method to be adapted to current production requirements. The plasma arc is generated by a high-performance CEBORA PLASMA PROF 254 source, which minimises spatter during operation and reduces the need for additional machining of the finished parts. These features make the STIGAL VXstandard suitable for the production of precise steel components used across various industrial sectors. The machine features a stable, open design that provides free access to the work area from all sides. Outside the main work area is a attachment designed for tube machining. All process parameters are programmed using an ...
Laser Cutting Machine Manufacturer: TRUMPF Type: Trumatic L 4050 Year of Make: 2006 Laser power: 6,000 watts Working area: 2,000 x 4,000 mm
For sale is a single-spindle copy milling machine from Elumatec, type AS 70/44, built in 2007. The machine was overhauled in the workshop (almost overhauled). As part of the overhaul, the following new spare parts were installed: - both bearings on the spindle, - both bearings on the engine, - Straps, - all linear bearings (10 pieces), - Gas pressure spring, - Both clamping cylinders including rubber buffers - Copy lever, - Öler (Festo), - Pressure reducers (Festo), - Foot valve with protective tube, - Clamping lever (5 pieces), - Copy scales, - CEE plug, - all hoses and plugs. In addition, the large horizontal and two vertical shafts were re-chromed. Most of the galvanized parts were re-galvanized. All information without guarantee. The price quoted is a VB net price. The machine is sold on account with VAT. Payment can be made in cash on site ...
ARBURG Allrounder 220 S 150-30, built in 2001 Equipment / Condition: - Selogica control system with CF card reader - Clamping force 150 kN, injection unit 30, screw 18 mm (screw/barrel tested) - Operating hours according to control: approx. 48,000 h (pump) / approx. 43,000 h (automatic) - Very compact machine, footprint approx. 2.1 x 0.8 m - ideal for small parts - From a mold making pilot plant (sampling and 0 series), little used in recent years - Without peripherals (dryer and hopper available on request) - Inspection in operation possible - Location Southern Germany, price on request
Wittmann Battenfeld EcoPower 180/350/130, built in 2018 All-electric 2-component injection moulding machine with vertical second unit and turntable. Clamping force: 180 t Injection unit: 350 / 130 (aggregate A horizontal, aggregate B vertical) Screw diameter: 35 / 25 mm Spec. Spray pressure: 2,083 / 2,218 bar Injection volume: 168 / 61.4 cc L/D Ratio: 22 Size of the clamping plates: 810 x 805 mm Lights spar spacing: 570 x 520 mm Tool installation height: 225 mm (increased installation height EBH +300) Ejector force: 40 kN Rotary table: Ø 750 mm Control: UNILOG B6P, Ready for QuickLook app Operating hours: 12,869 h, Number of shots automatic: 5,409,083 Protective enclosure Dimensions LxWxH: approx. 5.5 x 2.6 x 2.4 m Price on request.
Wittmann Battenfeld HM 180/350H/350V ServoPower, year 2015 2-component injection moulding machine with vertical secondary unit and rotary table, ServoPower drive. Clamping force: 180 t Injection unit: 350 / 350 (aggregate A horizontal, aggregate B vertical) Screw diameter: 30 / 35 mm Spec. Spray pressure: 2,835 / 2,083 bar Spray volume: 123 / 168 cc L/D Ratio: 22 Lights spar spacing: 570 x 520 mm Tool installation height: 325 mm Ejector force: 41.2 kN Ejector travel: 200 mm Rotary table Control: UNILOG B6S Operating hours: 16,967 h, Number of shots automatic: 6,043,139 Oil filling: 400 l, cooling water: 320 l/h, sound level: 72 dB(A) Weight: approx. 11,200 kg Dimensions LxWxH: approx. 5.0 x 1.75 x 2.14 m Price on request.
used
Complete with agitator, mixing tank, lobe pump, SUS316/SUS304 construction and heating system. Please contact Aisyah: 019 383 9291 Item under: F1BHC Located at: F14
Manufacturer: Spiro Model: Florett 3000 V3 Year: 2016 Condition: Used Stock Number: 9522 Work table length: 4000 mm Work table width: 2100 mm Table height: 1450 mm Dimensions of the sheet: 3000 x 1500 mm Maximum sheet thickness when cutting: 6 mm Plasma Source: Hypertherm Powermax 65
Bystronic BySprint Fiber 4020 - Laser Cutting Machine - Bystronic ByVision CNC control - 15" TFT-LCD control panel - Operating hours: 25076 h - Cutting hours: 10728 h - Year of construction 2015 Technical data - Laser Source: Fiber Laser - Laser power: 6000 W - Working range: 4064 × 2024 × 70 mm - X-travel: approx. 4000 mm - Y-travel: approx. 2000 mm - Z-range: 70 mm - Maximum sheet thickness steel: 25 mm - Maximum sheet thickness stainless steel: 30 mm - Maximum sheet thickness aluminium: 30 mm - Maximum sheet thickness copper: 12 mm - Maximum sheet thickness brass: 12 mm - Electrical connected load: 22.7 kVA - Machine dimensions WxHxD: 13700 x 2565 x 6670 mm - Machine weight: approx. 15000 kg
HAUSER S 50 CNC 311 ist eine CNC Koordinatenschleifmaschine, die Präzision, hohe Genauigkeit und Zuverlässigkeit für anspruchsvolle Schleifaufgaben bietet. Ausführung 2-Ständer, Tisch 1020×860 mm, Längsweg X 900 mm, Querweg Y 600 mm, Weg Vertikalschlitten 635 mm, Durchlass Spindel-Tisch 750 mm, Durchlass zwischen Ständern 950 mm; größter Schleifdurchmesser 230 mm (360 mm mit Auslegerplatte); Konusschleifen bis 16°. Technische Daten: Z-Hub 0–170 mm stufenlos, Hubgeschwindigkeit Z 1–12000 mm/min, Hubfrequenz 6 Hz, radiale Feinzustellung U max 6 mm, Planetenbewegung C 5–300 t/min, Schleifspindel 4500–80000 t/min (Luftturbine 160000 t/min); Anschluss 3×400 V 50 Hz, Gesamtleistung 9 kVA; Gewicht ~6300 kg; Abmessungen 3000×2500×2870 mm. Ausstattung: retrofizierte Steuerung, Satz Schleifstifte/Maschinenschraubstock, Schleifmotoren 45 S/45 ST, C-Achse; Maschine revidiert 20 ...
3000 x 1500mm CG 4000w FIBER Night Train Genius Robot part stacking 20 station servo electric
used
Weight: 5.400 Kg, Dimensions of the grinding wheel: Ø400 x Ø127 x 100 mm, Height to be rectified: 450 mm, Rectify surface: 1200 x 600 mm, Maximum width to be machined: 600 mm, Maximum length to be rectified: 1.200 mm, Motor power of grinding head: 10 Cv, Useful surface of the work table: 1200 x 550 mm
linear axis:: - travel -x axis: - mm weight max. in kg: - kg total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
longitudinal feed: - mm slides vertical travel: - mm grip- and swivelling device: - weight max. in kg: - kg Control: Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Special price for pickup EXW / EX Foundation from the Osterburken site Linear/gantry axis system in heavy-duty industrial design Long horizontal X-axis 2 vertical linear axes / Z-axes Two separate handling units Rack-and-pinion drive on the horizontal axis Servo motors and gearboxes Power transmission via energy chains Pneumatic components and gripper technology Sensors and limit switches Complete cabling Separate industrial control cabinet Siemens SINAMICS servo drive technology Multiple SINAMICS motor modules / power modules Siemens industrial control and operator components Operator panel on the control cabinet Safety and switching technology Various decentralized I/O and ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 197510 € : 3732.94 € : 1010 mm : 590 mm : 1000 x 400 mm : 1000 x 400 mm : 0 -25 m/min : 0 - 4000 mm/min : 0,001 mm : 450 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3675 mm : 4055 mm : 2480 mm : 6500 kg : 423 kg : 670 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 5.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with preci ...
x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 356 mm turning length: 1.255 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm distance between spindles: 1.511 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 91 mm max. bar capacity: 80 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm axis stroke:: x-travel: 260 mm z-travel: 1.345 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 5,5 / 3,7 kW total power requirement: 50 kVA ...
Parallel Lathe COLCHESTER MASTER VS 3250 Year of construction: 1996 Between points: 1250 mm Max diameter in front of bench: Ø 340 mm Maxi Ø over saddle: Ø 160 mm Centre height: 170 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 3250 RPM 3-jaws chuck Ø 200 mm Turret Mutifix B Metric Withworth threading 3-points steady Tailstock CM4 Scale WIZARD 150 PLUS Longitudinal + transversal auto feeds Spindle speed by electric drive Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1400 x 1700 mm Weight: approx 2 T
Offer 26251 Technical data: Drilling capacity in steel ST 60 32 mm Drilling capacity in steel ST 60 40 mm Long spindle MK 3 Drilling spindle speeds infinitely variable 160 - 2250 rpm Drilling spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machined base plate with T-grooves 400 x 400 mm Max. distance from base plate to spindle 600 mm Emergency stop button E. Footswitch Space requirement approx. W 450 x H 1250 x D 900 mm Weight approx. 250 kg Keyless chuck Table base
Offer 26203 Technical data: - Drilling capacity - in steel 16 mm - - in aluminium 20 mm - Drilling spindle holder MK 2 - Drilling depth 100 mm - Spindle / column projection 215 mm - 6 drilling spindle speeds stage 1 200 - 1600 rpm - 6 drilling spindle speeds stage 2 400 - 3200 rpm - Drive 400 V / 0.7 kW - Drilling table with T-slot W 250 x D 320 mm - Max. distance between drill chuck / table approx. 220 mm - Space requirement approx. W 300 x H 1050 x D 450 mm - Weight approx. 100 kg - Keyless chuck 1 - 13 mm - Coolant device - Original machine cabinet
Inclined Slicer Slicer / Slicer BIZERBA GSP H Technical data: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife including orogonal Bizerba knife sharpener Luminous flux Year of construction: 2024 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Fully automatic slicer / slicer Bizerba Type: VS 12 D Technical data: 220-240 Volt / 50/60 Hz / 2.6 A Year of construction: 2024 Fully automatic machine, can also be used as a semi-automatic machine at the touch of a button Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original Bizerba knife sharpener with normal carriage for sausage or cheese including stainless steel underframe trestle on castors with parking brakes Luminous flux / Schuko plug Function checked, machine immediately ready for use Condition, see original pictures!
Slicer with scale / slicer Bizerba Type: VS12 W Technical data: 400 Volt / 50 Hz Year of Make: 2020 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife with normal carriage for sausage or cheese with integrated checkweigher up to 3 kg Power current / 400V CEE plug Function checked, machine ready for immediate use! Original price approx.: EUR 8.650,- Condition, see original pictures! If you have any questions, email or call.
For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...
Manufacturer: Charmilles Model: Robofil 440 Year: 2001 Condition: Used Stock number: 9524 Max. travel length of the X-axis: 550 mm Max. travel length of the Y-axis: 350 mm Max. travel length of the Z-axis: 400 mm Maximum workpiece length: 1270 mm Maximum workpiece height: 400 mm Maximum workpiece height: 700 mm Maximum table load: 1500 kg Machine height: 2240 mm Machine length: 2600 mm Machine width: 2810 mm Machine weight: 3250 kg
table with one T-slot as well as a magnetic clamping plate with the plate dimensions: 400 x 200 mm
Key data: 350 , 650 , 175
STUDER S30-1 CE – High-precision cylindrical grinding machine | Complete retrofit We offer a STUDER S30-1 CE for high-precision external and internal cylindrical grinding work. The machine has undergone a comprehensive retrofit by MIRA Retrofit, including the revision and renovation of its main components, as well as a careful adjustment and tuning process. The result is a machine that is ready to work, with a high level of precision, reliability and stability, and performance comparable to that of a new machine. Main data: - Distance between points: 650 mm - Height between dots: 175 mm - Grinding: exterior and interior - Status: full retrofit – ready to work Revision and fine-tuning All elements have been carefully checked and adjusted to ensure high geometric accuracy and reliable, stable operation. Photographs of our finished machine. Availa ...
The machine is in good technical condition; it can be tested by prior arrangement.
maximum number of results exceeded
please refine your search
87 € 
