heidelberg 52 v used for sale

Grinding wheel, surface grinder, grinding belt, wide belt -Manufacturer: VSM, Wide belt sanding strip 1350 x 2620 mm 2 pieces -Type: SMA Form E13 Series KP510E -Grain size: 180 -Price/Fee: complete -Carton dimensions: 1480/260/H330 mm -Weight: 5.3 kg

Ref. -No.: 10235 Manufacturer: VIOTTO Year of construction: 1985 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Italy Serial no.: 1024 Further information: disc grinder

Earth cable for inert gas device, electrode device, stud welding device -Welding cable: Extension / connecting cable for stud welding device -Length: 24 m -Plug: 4-pin -Transport dimension: 600/600/H100 mm -Weight: 18 kg

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Ground cable for inert gas device, electrode device, stud welding device, MIG/MAG hose package -Welding cable: MIG/MAG hose package extension -Length: 30m -Plug: 10 pin -gas hose -Cooling water hoses -Transport dimension: 760/760/H400 mm -Weight: 47 kg

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

Vacum dough divider

Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Glass VSM150 Mixer Serial: 2941 150Kg glass mixer, tilting for discharge, stainless lid and sight hole. For marinating and massaging the meat and mixing of liquid, semi-solid and powdery products, with easytouch interval switch for 10 programmes with timer and rest settings, with ,manual, mobile, 3Ph

Level shifter, level shifter, converter, level adjustment -Manufacturer: pilz, level adjustment type V24/RS485 -Interface: 9 25 pin -Voltage: 220V -Dimensions cardboard: 155/100/H80 mm -Weight: 0.4 kg

VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 75 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator while coat ...

Clamping jaws for round samples -Manufacturer: VAS, Clamping jaws for round samples, 4 pieces -Type: 15-30 mm -Dimensions: see photo technical drawing -Case dimensions: 270/230/H80 mm -Weight: 6.2 kg

Inductive sensor, electronic sensor, proximity switch, proximity sensor, proximity sensor -Manufacturer: Telemecanique, inductive sensor proximity switch unused original packaging -Type: XSA-V12373 -Number: 1x sensor available -Price per piece -Cardboard dimensions: 250/90/H35 mm -Weight: 0.2 kg/pc.

VM VG1-VN VOGA MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 70 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator whil ...

Position computer, computer, control unit, robot controller, controller -Manufacturer: Pilz, AT-Industriecomputer -Type: P10-ATW VGA 304512 -Dimensions: 310/250/H165 mm -Weight: 4.4 kg

VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of p ...

tool setting device, tool presetting device, milling cutter setting device -Measuring range X-axis radius: mm -Z-axis: 630 mm -Display accuracy: mm observation unit -Projector: mm -Enlargement: crosshairs -360 degree protractor -Dimensions: 570/1720/H1875 mm -Weight: 387 kg

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

PATRONENFILTER FÜR PULVERBESCHICHTUNGSKABINEN Die Filter bestehen aus 100% reinem Polyester. Nachstehend sind die verfügbaren Standardgrößen aufgeführt 320x600mm 320x650mm 320x1000mm 320x1200mm Andere Größen und Spezifikationen können ebenfalls angefertigt werden. Kontaktieren Sie uns für weitere Informationen und Preise. für Pulverkabinen für Staubabscheider für automatische Maschinen für Pulverbeschichtungsanlagen hoher Wirkungsgrad antistatische Option Option Bajonettanschluss POWDER COATING BOOTH CARTRIDGE FILTERS Filters made of 100% pure polyester. Available standard sizes; 320x600mm 320x650mm 320x1000mm 320x1200mm Available polyester filter media density; 160 g/m2 200 g/m2 260 g/m2 Demands of different sizes and specifications can also be manufactured.

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMREB 80 K 4 -Speed: 80 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection rating: IP 44 -Brake: 7.0 Nm -Dimension: 540/200/H260 mm -Weight: 33 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KRA 80.2/6 -Speed: 20 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 23 kg

Sprühdüsen Ejektordüsen Nebeldüsen Wasch-Reinigungsdüsen Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. AKKORDEON-LACKIERKABINE Einfahrbare Spritzkabinen sind für manuelle Lackierarbeiten mit seitlicher Belüftung konzipiert, um überschüssigen Flüssiglack abzusaugen. Der Vorteil der einfahrbaren Flüssiglackspritzkabinen besteht darin, dass sie Platz in der Werkstatt sparen. AUFBAU Sie bestehen aus einem Scherenmechanismus aus elektroverzinktem Rechteck- und Rundrohr und sind von außen mit PVC-Gewebe verkleidet. Das Bewegungssystem umfasst Industrierollen oder ein Schienen- und Rollensystem, das je nach Außen- oder Innenbereich und Länge der Spritzkabine empfohlen wird. Eine Vorhangtür dient zum Schließen der Tür während des Lackiervorgangs. BELÜFTUNGSSYSTEM Die seitliche Belüftung sorgt für hohe Effizienz während des Lackiervorgangs. Die Filterwand ist modular aus verzinktem Blech gefertigt und mit Regalen und einer Notfalltür an beiden Seiten ausgestattet. Der Abs ...

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KR 80.1/8 -Speed: 16 rpm -Power: 0.15 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 22 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 A -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 3x motors available -Price: per piece -Dimensions: 525/285/H320 mm -Weight: 88 kg/piece

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

Cold room lock, cold room lock, mortise snail lock, cold room door lock -Manufacturer: STUV, cold storage lock unused Ovp -Type: 3.16.416.1 KRT Lock V2A -Number: 5x door lock available -Price: per piece -Carton dimensions: 260/150/H40 mm -Weight: 1.1 kg/piece

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application

Flange connection, V-flange -Weld neck flanges. 183 pieces -Type: DIN2633 / EN1092 26 different versions see photos parts list -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H540 mm -Weight: 533 kg

PICKLING CABINET FOR CLEANING INOX PRODUCTS BEIZSCHRANK FÜR DIE REINIGUNG VON INOX-PRODUKTEN CABINET INTERNAL DIMENSIONS Length : 5.000 mm Width : 2.800 mm Height : 2.900 mm Material : Insulated sandwich panels, fire protected Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Emergency door : 1 set Working temperature: RT WORKBENCH Length : 1.800 mm Width : 800 mm Height : 900 mm Ventilation : AISI304 extraction fan, circular air duct Material : PP material body, removable splash covers Grid : AISI304 stainless steel Sink : PP material Accessories : Hose reel, wardrobe Droplet separator WASTE WATER ROOM Length : 2.000 mm Width : 2.800 mm Height : 2.900 mm Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Working temperature: RT Emergencydoor  ...

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Brunner, servo motor -Type ACO.222A V130 -Voltage: 200V -Speed: 3000 rpm -Shaft: Ø 11 x 20 mm -Quantity: 2x motor available -Price per piece -Dimension: 195/70/H70 mm -Weight: 1.9 kg/pc.

VM PLC CONTROLLED POWDER COATING RECIPROCATOR The powder coating reciprocator is designed for automated painting applications. It ensures perfect coating of the work pieces passing in front of it by moving the spray guns up and down in a single axis. It moves in one axis along the vertical guide column, providing maximum performance under daily working conditions withstanding continuous load. The brake drive motor and gearbox have been choiceed to ensure the reciprocator’s long life and performance under heavy working environment conditions. The mechanical system design with chain or belt provides silent and vibration-free vertical movement. Perfect coating is achieved with easy adjustment of stroke and speed. RECIPROCATOR CONTROL UNIT • Remote control panel 7" 65K color hand touch LCD screen, • Two reciprocators can be controlled independently from the same display, � ...

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. abcs://vogamachine.com info@vogamakina

TRANSFER TYPE POWDER COATING LINE Curing oven - gas, diesel or electrical source Powder coating booth - cyclone type or cartridge filtered Powder coating equipment - manual or automatic system Overhead conveyor system - tracks trolleys and frull structure Contact us for quotation We provide the best technical solutions and competitive prices German speaking contact in Germany VOGAMAKINA Ltd.

Sound level meter, sound level meter, sond level meter -Manufacturer: Voltcraft, Sond Level Meter sound level meter -Type: 33-2050 -Part No.: 100609 -Dimensions: 170/60/H50 mm -Weight: 0.3 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: VEB GWB Wiesa, milling chuck SK40 -Type: B 40/40 -Number: 5x milling holder available -Price per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/pc.

c

Lock, cabinet lock, locking, control cabinet lock -Cabinet lock: without key and locking -Type: Square -Quantity: 76x door lock available -Price: per piece, minimum order 3 pieces. -Dimensions: Ø 32 x 45 mm -Weight: 0.1 kg/piece

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

POWDER COATING LAB HAND GUN WAGNER & GEMA COMPATIBLE, WORKS PERFECTLY WITH THE ORIGINAL CONTROLLER DELIVERY: 100Kv LABO HAND GUN 5m CABLE + COMPATIBLE SOCKET

POWDER COATING HAND GUN Cost effective and long life cascade Made in Turkey