heidelberg 52 v used for sale

Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90

NEW Machine Paper size max 54 ? 72 cm Paper size min 180 ? 300 mm Paper sheet thickness 0.90 mm Foil-pulls &, programs Standard 2 ? upgradable to 4 Heating zones 6 for optimal temperature allocation Available in following sizes: 38 x 52 40 x 58,5 56 x 77 56 x 82 64x90 Optional: Hologram unit Delivery time: 3-4 Month after order

From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, switching-on valve -Type: MS6-EE-1/2-V24-S 527682 -Operating pressure: 4 - 18 bar -Quantity: 1x valve available -Dimensions: 180/100/H290 mm -Weight: 1.3 kg

roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...

General SKU397X1119 LocationBarneveld MakeDe Dietrich Type525 l. No.23046 Year of construction1993 Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume525 Ltr. Pressure6 Bar Specified Features - Pressure vessel MaterialGlass - Enamel Capacity525 Ltr. Vessel sizesø 800x1100 mm Dished topcheck Dished bottomcheck Top connectionsDN50 OutletDN25 Max. temperature-10 / 200 °C Information Mounted on legscheck Weight650 kg Floorspace1,20x1,00 m Total height1,85 mPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 15726.53 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 447 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 520 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 650 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-volvo-tad1630g-generator- 520kva/364, , = More information =, , Type number: TAD1630G GENERATOR 520KVA

Model: VXC Nitro 2450 Typ 523 Year of Manufacture: January 2014 Voltage: 3 x 230/400V, 50 Hz Power Consumption: 45 kW Nitrogen Consumption: 25 m³/h Exhaust Capacity: 2 x 200 m³/h Manufacturer: Rehm Thermal Systems Find more here - / Contact us at -

Internal grinding machine VOUMARD 52A

Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.1 Year 1996 - Serial-No. 79719/96-239513 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.D+MKE Year 1998 - Serial-No. 101486/98-256505 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

M. No.: 664937N // Counter (m): 42 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit

Heidelberg SM 52-2 plus version Age: 2009 Counter: only 799.065 impression (Machine comes from school) Format: 37 x 52 cm Performance: 13.000 sheets/hour Equipment: 2 color Straight machine Pull lay control in Feeder Multiple sheet detector/electromechanical in Feeder Ultrasonic double sheet detector in Feeder Alcolor Baldwin BasicLiner 1.0l, Hydrostar compact Press Center Compact Ink flow control Inking Unit wash up device Blanket Unit wash up device Impression cylinder wash up device EasyPlate Sheet slow down device in Delivery Antistatic device compact in Feeder and delivery Plus version for Nummeration and Perforation Powder sprayer With punch and bender With books

Impressions=33 m, Condition= Good , Availability= 2026-03-19, Stream feeder CP-Tronic! Alcolor dampening Baldwin cooling + Version Straight machine Checked and ready to move

impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Falzmaschine / Folding machine Heidelberg TH82/6-4-VFZ Year 2006 Round Pile Feeder  Folding Type 6 - 4 buckles - 1 knife Press Delivery TH70 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

impressions: 44 Mio. max. printing speed sheets: 8000 /h max. paper size: 32x46 cm numbering unit: include The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. format 75 x 105 cm Year of construction 2006 Automatic punching machine Computer control with touch screen max. 7,500 sheets/h (idle) Corrugated cardboard up to approx. 4 mm 2 side marks for drag or slide function 2 locking frames 2 Set of Clamping Frames for Stripping Tools Non-stop set-up and display Reading totalizer: approx. 28 million printing Operating hours 21,400 Delivery date: immediately Price on request. We supply and install worldwide.

Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.D Four-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control

Heidelberg Stahlfolder VFZ 52 Baujahr 2008 Format max. B × L (cm) : 52 × 36 cm Format min. B × L (cm : 12 × 10 cm Bsbljxuif Negf Aq Hjlp Geschwindigkeit max. (m/min) : 160 Geschwindigkeit min. (m/min) : 25 Taktzahl max. (T/h) : 30.000 Einlaufhöhe (cm) : 51,5 – 91,5 Schwertposition : oben / unten Steuerung MCT Sofort Verfügbar

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

#7367 Heidelberg Varimatrix 82 CS Age: 2014 The cuts: 31.4 million Available: Immediately Location: Europe Size Max.: 815 x 605 mm Min. size: 320 x 280 mm The Cutting Force: 200 Tons (MT) Speed: up to 8.000 s/h

max. printing speed sheets: 8000 /h max. paper size: 32 x 46 cm dampening system: Aquaprint numbering unit: incl N+P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 76 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm numbering unit: include N+P dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WITH N&P UNIT (numbering & perforating) Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: with N&P (numbering & perforating) unit

Manufacturer: Heidelberg Versafire Model: Pro C7 110X Year of Manufacture: 2017 Type of Machine : Digital Printing System Total Impressions: 6.6 million Output Speed: 80 ppm (Letter) Maximum Monthly Impressions: up to 240,000 Standard Paper Capacity: 2,500 sheets Paper Feed: 1st tray 1,000 sheets x2 tandem / 2nd tray 500 sheets Media Size: up to 33 x 70 cm (coated and uncoated) Media Weight: up to 300 gsm Feed System: Vacuum Feed LCIT RT5100 x2 Oversize Sheet Tray: included Condition: Used SOFTWARE AND CONTROL INCLUDED - PC Hardware for Prinect Digital DFE 2017 - RIP Software - Heidelberg Prinect Cockpit - X-Rite Basic Pro 2 - Prinect PDF Toolbox - Coating Editor Find more here - / Contact us at -

Non-stop sheet feeder with pre-stacking device Non-stop roller towel display Mechanical double-sheet inspection Side marks on the operating and drive side Strip insertion device in the delivery Standard stripping frame Punching Frame Stripping station Touch screen control Without compressor

We offer: Roller E 247165 Defect roller Crushing roller for TBA 8 aseptic filling machine Intermediate sale reserved

Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input

Recon Part Number: 0337 7335 / 0187-32-20.30 / 0187-32-5014402/0132-300 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Immediately available Elevated main start valve

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: MF 04 520-HN -Price: per piece -Quantity: 4 available -Weight: 0.2 kg/piece

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

CNC Model: Fanuc CNC Version: 18i-MB5 Tool Mount: HSK 63 Spindle power: 21Kw Number of spindle speeds: 12000 Number of tools: 60 Twin-spindle with double tool changer: yes X-axis travel: 1000mm Y-axis travel: 400mm Z-axis travel: 360mm Fast feeds linear axes X Y Z: 45m/min Guides: roller CNC divider: yes Rotation: Continuous High refrigerant pressure: yes Chip conveyor: belt Machine equipment: N° 6 disposable machines :::D DIMENSIONS AND WEIGHT::: Length: 5000mm Width: 3900mm Height: 3300mm Weight: 8500Kg

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

Shaking table Müro; cleaned and tested; Format 52x33cm; vibration strength adjustable; Tabletop device. Jogger Müro; cleaned and checked; size 52x33cm; adjustable in jogging; table top machine.

Overbeck Rising falling Incline belt conveyor with overdrive vorrun GF 800+5260-600-500 RA2461 Technical data: Conveyor length (NL): 6060 mm ( 800 mm vorrun + 5260 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 800+5260 ) Nominal / outside wi ...

This 7-axis STAMA MC 526/M was manufactured in 2005, featuring a Siemens Sinumerik 840 D control system. It includes a milling spindle with a speed of 10,500 rpm and a turning spindle speed of 5,000 rpm. The machine offers a tool magazine with 132 tools capacity and rapid traverse rates up to 60 m/min. Ideal for complex milling and turning tasks. If you are looking to get high-quality milling and turning capabilities consider the STAMA MC 526/M machine we have for sale. Contact us for more information.

This STAMA MC 520 was manufactured in 1994. It features a robust vertical machining centre with a clamping area up to 3000 x 430 mm and a permissible table load of 1600 kp. Equipped with a high-speed spindle capable of 6000 rpm and optional 10000 rpm, it ensures efficient machining. The machine includes a 60-position SK40 tool magazine and a scraper belt chip conveyor. Contact us for more information about this machine.

This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for sale.Contact us for more information.

PDC-S (Printing Density Control-Spectrophotometer) (II) Remote register control: diagonal Komorimatic continuous dampening Ink unit temperature control KMS - Komori Monitoring System (IV) Cooling and recirculation (Technotrans) Coating unit with chambered doctor blade system (Tresu + Technotrans alpha.v) IR-Dryer (Baldwin-IVT) Impression-cylinder washing device - automatic Plate cylinder - chromed Ink-roller washing device - automatic Blanket washing device - automatic Extended delivery Powder sprayer (Weko AP 110) Blanket cylinder - chromed Model (0,6mm) KPC

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4 + 4 bags Sniffer Output Available: Immediately