137,650 used machines on RESALE, but how to find them? Machine Search
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...
This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut ...
Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Engine power of the saw blade 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balancing and durability. Shock-absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. Carbide circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system by means of new ball bearings with double dust protection and automatic lubrication system. CE-comp ...
CONTAINER ANLAGE 90 m2 plant, 6x 20 FT OfficeContainer Building / Office / Living Room, residential container workshop container container plant BJ 2005 - 6x 20 foot container (2.47 m wide, 6.00 m long, 2.90 m high) exterior size - 2.50 m high inner dimension - Residential container office container construction site container, container plant - complete price 6 pieces, excluding assembly - easy assembly - Construction Year 2005
AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power hydraulic unit Hp 1,5 / Kw 1,1 saw blade diam. mm.600 speed saw spindle rpm 3000 working hight over ground floor 850 mm working pressure 8 bar weight 450 kg
Key data: 500 mm, 160 mm
Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production ...
McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.
Key data: 800 mm
Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...
Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL
Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !
Dimensions (L/W/H): 3900x2230x3900 mm Weight: 1500 kg Total power requirement: 18 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - ...
TECHNICAL DATA: Max working length mm: 3100 Min workable length mm: 500 Tilting blade: 0-45 ° Blade diameter max mm: 300 02 Saw aggregates Ø 300 + 02 Scoring aggregates - Ø 120 Central Saw Aggregate Automatic destacking 4-axis numerical control Total electric power KW: 10 Weight Kg: 2200
Pull-off table after gate roller aisle left - right drop 6 meters long 3 meters wide
Automatic optimization crosscut saw: Technical data: Follow later!
Balancing valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M28/PCN 805 793 -Connection: 28 mm -Price: per piece -Number: 4 piece -Dimension package: 255/90/H90 mm -Weight: 1.1 kg/piece
Free-swinging model S33 according to Mart Stam in white leather
Straightening plate measuring plate measuring plate reinforced plate made of steel casting used. Length approx. 3560 mm Width approx. 985 mm Height approx. 910 mm (adjustable) with 5 feet Casting tear ingenuous plate with height-nivelable feet, support ball-bearing Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical
Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.
Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg
Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M12/PCN 015341 -Connection: 12 mm -Dimension box: 220/80/H90 mm -Weight: 0.5 kg
Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve. Shut-off valve -Manufacturer: Castel, collector valve/valve membrane, unused in original packaging -Type: 6110/22 -Price: per piece -Number: 5 piece -Dimension box: 100/50/H40 mm -Weight: 0.1 kg/piece
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: ARI, butterfly valve ZESA with handwheel -Connection: DN200 -Quantity: 1 piece -Dimensions: 330/120/H500 mm -Weight: 14.5 kg
maximum number of results exceeded
please refine your search
