hal off used for sale

Hall 8.000 m ², 40 x 200 m, 7 m high (eaves) steel Hall / steel construction, self-supporting,. -Sheet metal walls, w/o roof sheet, self removal -smaller units possible, German Hall

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

2 pcs HALDER interchangeable plates V70, 500 / 400 mm, groove distance 70 mm

cutting diameter: 280 mm capacity 90 degrees: flat: 380 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 300 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 200 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW dimensions of the machine ca.: 1647 x 2157 mm weight: 720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 330 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: flat: 350 x 320 mm capacity 45 degrees: round: 320 mm capacity 45 degrees: square: 300 x 300 mm capacity 60 degrees: flat: 230 x 310 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: round: 200 mm turning speed range:: 15 - 100 m/min dimensions of saw-band: 4640 x 34 x 1,1 mm engine output: 4,0 kW weight: 1190 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping th ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - either manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - optionally manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in Ge ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Special accessories included: - MEP LubeCut microdosing ...

HALOILA Film wrapper Model no.: Octopus T200 Manufacturing year: 2015 Maximum power: 20 kW Full load current: 45A Voltage: 3400VAC Frequency: 50Hz Max short circuit current: 6kA

saw blade diameter: 400 / 425 x 40 mm cutting diameter: 40 - 180 mm cutting speed: 14/28 m/min capacity 90 degrees: flat: 260 x 80 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: flat: 180 x 80 mm work height max.: 1050 mm voltage: 400 V total power requirement: 5,0 kW weight: 1170 kg range L-W-H: 1230 x 1205 x 1980 mm Furnishing: - semi-automatic underfloor saw - with miter adjustment, swiveling left / right - hydraulic, vertical & horizontal clamping device - large work table - stepless feed from the saw blade - saw blade - machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 120 mm saw blade diameter: 370 mm vice: 190 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 125 x 95 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: flat: 90 x 95 mm dimensions of saw-blade: 370 x 32 x 2,5 mm cutting speed: 15 - 150 m/min engine output: 3,0 kW weight: 640 kg range L-W-H: 900 x 1500 x 1910 mm New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech ...

cutting diameter: 230 mm capacity 90 degrees: flat: 320 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: flat: 230 x 140 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 190 x 190 mm capacity 60 degrees: flat: 120 x 105 mm capacity 60 degrees: square: 105 x 105 mm capacity 60 degrees: round: 120 mm turning speed range:: 35 - 70 m/min dimensions of saw-band: 2720 x 27 x 0,9 mm height of material-table: 950 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 kg dimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User ma ...

cutting diameter: 250 mm saw band length: 2950 mm table height: -- mm : 280 mm : 2950 x 27 x 0,9 mm : 280 x 200 mm : 230 mm : 190 mm : 180 x 180 mm : 180 mm : 120 mm : 110 x 110 mm : 110 mm : 36 / 72 m/min : 1,5 / 1,8 kW powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and m ...

cutting diameter: 305 mm saw band length: 3375 mm cutting width: 350 mm dimensions of saw-band: 3375 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,8 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3320 mm table height: -- mm : 330 mm : 40 / 80 m/min : 3440 x 27 x 0,9 mm : 280 mm : 260 mm : 380 x 260 mm : li 260 mm : li 250 mm : li 300 x 200 mm : re 200 mm : re 180 mm : re 230 x 160 mm : 180 mm : 170 mm : 200 x 170 mm : 870 mm : 1,5/1,8 kW : 0,7 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large  ...

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 mm capacity 45 degrees: flat: 220 x 200 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140 x 80 mm work height max.: 870 mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control and 4 Modes of operation Description: - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for Intermediate angle - Control panel on vertical ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm : 40 / 80 m/min : 3650 x 27 x 0,9 mm : 300 mm : 260 mm : 330 x 260 mm : 260 mm : 250 mm : 270 x 200 mm : 180 mm : 170 mm : 170 x 170 mm : 870 mm : 2,35 kW : 0,7 t : 2,7 x 1,6 x 2,0 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically  ...

Haloila OCTOPUS 1800 SFTS kW: max 5.0 V: 3x400 KG: 2650 A: 20 Capacity: 120 pallets/ h Control: Siemens S7

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg Current new price 12.500 euros Furnishing: - semi-automatic band saw machine - with miter device 45° right - 60° left - Microprocessor control EVO to control all functions - with both. Miter device, adjustable via large turntable - either manual or automatic lowering of the saw arch - BI-metal saw band - Cooling device - Chip removal brush - Operating instructions in German Functionality of semi ...

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

saw blade diameter: 350 mm cutting diameter: 115 mm capacity 90 degrees: flat: 200 x 80 mm turning speeds: 1700/3400 U/min saw-blade dia.: 350 x 3,3 x 40 mm motor: 400 Volt total power requirement: 1,8/2,6 kW weight: ca. 600 kg range L-W-H: 1000 x 850 x 1500 mm Furnishing: - semi-automatic ALU circular saw - pneumatic material clamping - Stepless adjustment of the saw head lowering speed - Machine table with miter adjustment - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6,0 - 8,0 bar total power requirement: 1,4 / 1,9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - Pneumatic quick clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously dimensioned gears - with Eisele rotation compensation for a long saw blade service life - Co ...

cutting diameter: 270 mm saw band length: 2920 x 27 x 0,9 mm table height: 940 mm band speed: 35 + 70 m/min capacity 90 degrees: flat: 285 x 200 mm capacity 90 degrees: square: 250 x 250 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: flat: 200 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 140 x 180 mm capacity 60 degrees: square: 140 x 140 mm total power requirement: 2,2 / 2,9 kW weight of the machine ca.: 310 kg dimensions of the machine ca.: 1700 x 800 x 2050 mm Furnishing: - semi-automatic band saw, with miter adjustment - Miter adjustment via large turntable - 2x saw band speeds - Stepless lowering of the saw frame - hydraulic material clamping - Machine base - 3x feed roller conveyor included - User manual (PDF format) The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

cutting diameter: 330 mm saw band length: 4640 mm cutting width: 510 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 45 degrees: flat: li. 350 x 320 / re. 380 x mm capacity 45 degrees: round: li. 320 / re. 320 mm capacity 45 degrees: square: li. 320 / re. 320 mm capacity 60 degrees: flat: li. 230 x 310 / re. 250 x mm capacity 60 degrees: round: li. 200 / re. 200 mm capacity 60 degrees: square: li. 200 / re. 200 mm weight of the machine ca.: 1,19 t total power requirement: 4,0 kW Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice clo ...

This Halter Automation Load Assistant S-180-20 Robot was manufactured in the year 2018. The machine has a minimum workpiece of 40 mm x 40 mm.

saw blade diameter: 350 mm cutting diameter: 100 mm dimensions of saw-blade: 350 x 2,5 x 32 mm height of material-table: 900 mm cutting speed: 38/76 m/min capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm capacity 90 degrees: square: 90 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 125 x 90 mm capacity 45 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: flat: 90 x 90 mm capacity 60 degrees: square: 90 x 90 mm clamping range: max. 170 mm total power requirement: 1,8 / 2,4 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1200 x 600 x 2200 mm The KASTOradial U 10 is a semi-automatic vertical circular saw with two Cutting speeds and steplessly adjustable saw feed for the universal use in workshop and production. The machines stands out through precise dovetail guides, robust gears and larg ...

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

Size: 230 x 325 mm Equipments: good condition without any damage as is 2 offset printing units Delivery table

Insektenfänger, Fabr. ADE HALLEY, Type Ik 2183

For sale is a working electric motor with 75 KW /132 A and 1485 rpm.

cutting range: 310 mm capacity 90 degrees: flat: 520 x 310 mm capacity 45 degrees: flat: RE 260 x 310 mm capacity 45 degrees: flat: LI 350 x 310 mm capacity 60 degrees: flat: LI 230 x 300 mm dimensions of saw-band: 5000 x 34 x 1,1 mm vice: 530 mm Öffnung band speed: 14 - 125 m/min coolant tank: 60,0 l total power requirement: 4,0 kW weight: 2250 kg range L-W-H: 2600 x 1500 x 2300 mm maintained condition () Furnishing: - electro-hydraulic band saw semi-automatic 2-column guided - for large cutting areas - including simple miter adjustment left 60° + right 45° - manual miter adjustment including analog miter display - Swivel control panel, front left - Machine can be operated manually / semi-automatically - horizontal and vertical material tension - continuous adjustment of the material tension - continuous adjustment of the saw band speed (14-125 m/min) - continuous feed adjustment of ...

Electric motor, three-phase motor -Power: 4 kW -Speed: 2880 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 375/300/H250 mm -Weight: 41 kg

Electric motor, three-phase motor -Motor: unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Number: 32x motors available -Price: per piece -Dimensions: 450/340/H299 mm -Weight: 44 kg

saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 400 x 30 mm capacity 90 degrees: flat: 345 x 70 mm capacity 90 degrees: square: 140 x 140 mm capacity 45 degrees: flat: 280 x 30 mm capacity 45 degrees: flat: 240 x 70 mm stroke: 240 mm saw blade turning speeds: 6 / 12 / 24 / 48 n/min work height max.: 1000 mm engine output: 3,0 / 3,6 kW weight of the machine ca.: 1150 kg range L-W-H: 1000 x 1330 x 1860 mm Furnishing: - electro-hydraulic semi-automatic cold circular saw - EISELE front control panel - robust and stable machine base - continuously adjustable feed speed of the saw blade - front guard / foldable - Drive via worm gear including EISELE rotation compensation” - comfortable miter adjustment in both directions via large turntable - suitable for the use of Ø 400/425/450 saw blades - hydraulic material tension - Pole changer motor for the gear stages  ...

General SKU392S524 LocationBarneveld MakeHALA-APPARATEBAU (D) TypeRührbehälter No.004/98/20T02 Year of construction1998 Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume220 Ltr. Motor0.25 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity220 Ltr. Vessel sizesdia. 600x800 mm Dished bottomcheck With covercheck Manholedia. 200 mm Top connectionsDN40 OutletDN40 With jacket40 Ltr. Max. temperature80 °C With propellor stirrercheck Motor0,25 kW 230/400 V Speed mixing shaft360 rpm MaterialStainless steel Information Mounted on legscheck Floorspace1,2x0,8 m Total height1,6 m Weight250 kgStirring vesselsHalaStirring vessels > Stirring vesselsBrand > Hala What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldw ...

General SKU045C405 LocationBarneveld MakeHalvor Forberg A/S Larvik TypeF-1000 No.1904 Year of construction1997 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor30 KW Specified Features - Paddle dryer Paddle dryer(1x) Double shaftcheck Capacity3500 Ltr, Useful capacity 1000 Ltr Trough sizes1350x1695x1400mm InletDia: 300mm ManholeFull acces via door OutletDia: 590mm With jacketcheck 31 Ltr. Max. temperature150°C With adjustable packing glandscheck Motor30 KW, 380/660 Volt Speed mixing shaft± 32 Rpm MaterialStainless steel 1.4401 (316) Information Floorspace3,7x2,3 M Total height3,4 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Minerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAn ...

General SKU066A334 LocationBarneveld MakeHalvor Forberg A/S Larvik Norway TypeFT-200 No.S12-94 Year of construction1994 Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Paddle dryer Paddle dryer(1x) Double shaftcheck Capacity200 Ltr. Trough sizes1000x850x950mm ManholecheckInspection hatch 785x410mm Outlet790x140mm (2x) Motor5,5 KW, 380/660 Volt MaterialStainless steel Information Mounted on framecheck Floorspacedryer 1,7x1,6m Total heightdryer without filter 2,5m Extra Specifications- Dryer equipped with Forbergs PMS Pin Mill System = 2 high speed rotating shafts with welded pins - Heat exchanger and fan are missing - With nozzles for liquid injection - :With envelope filter Minerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOther chemicalStarc ...

HALO DB-20 double beam spectrophotometer. It works perfectly. Includes automatic 6 cuvette unscrambler and various sets of cuvettes. • Very large LCD digital screen • Visual data format tables and graphs • UV-Vis range 190 – 1100nm • Bandwidth 1.5 nm • Sliding sample compartment cover • Very simple data download and export, via USB stick to Excel or similar format.

saw blade diameter: 800 x 800 x 1500 mm cutting diameter: 200 mm stroke: 150 mm dimensions of the machine ca.: m total power requirement: 3 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haloila CobraX Pallet wrapper 2016, Pallet wrapper, rotating arm, wraps up to 2300mm, 1Ph

dimensions of saw-blade: Ø 320-350 x 3.0 mm cutting range: 120 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: flat: 200 x 90 mm capacity 45 degrees: flat: 140 x 90 mm work height max.: 925 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6.0 - 8.0 bar engine output: 1400 / 2800 U/min. total power requirement: 2.0 / 2.6 kW weight: 470 kg range L-W-H: 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition () Furnishing : - semi-automatic vertical cold circular saw - pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment with fixed stops - Convenient stroke adjustment of the saw unit using a clamping lever - Generously sized gearboxes - with Eisele rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements ( ...

Description: Former polishing station without air conditioning including light strips and sockets Sandwich principle  , Approx. Onsite Dimension. (l x w x h): 6,000 x 4,000 x 2,500 mm, weight approx.: 400 kg

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Half Round Slicer (Staylog) Manufactured by Valette&Garreau Model: STL-33

Working Length: 4000 mm

TECHNICAL DATA: Moulding aggregates: 3 Groove aggregates: 1 Hopper feeder Total connection kW: 4,7 For windows production with dividers

Steel hall, cooling hall sandwich panels clad used used Tem. Range approx. 3-12° C Walls: sandwich panels, PU foam approx. 100 mm Roof: trapezoidal sheet + 2x 60 mm insulation + rubber skin with jumper system and dehumidification The hall is separated in the middle by a partition wall. the cooling system is not part of the offer for the time being. In both halves there are 2 rows of double shelves, in the middle with autom. Shelf assemblers Shelf manufacturer: SCHÄFER Year of construction: 2006 approx. 4700 pallet spaces Galvanized steel sheet Shelf depth: approx. 1000 mm Compartment height approx. 1800 to 2000 mm Compartment width approx. 2900 mm compartment load 2x24 kN field load 537.6 kN Total dimensions approx. 50 x 15 x 30 m (LXWXH) Changes and errors in the technical data, information and prices as well as prior sale reserved.

Steel hall, steel construction, trapezoidal sheet clad used Manufacturer: unknown Dimensions approx. 28 x 10 x 23 m The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.