126,734 used machines on RESALE, but how to find them? Machine Search
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland
number of heads: 4 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm voltage: 220/380 V frequency: 50 Hz Dimensions (L/W/H): 100x70x150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Micrometer, micrometer screw -Measuring range: 400 - 500 mm -Also other sizes: available -Weight: 8.7 kg
Three-phase motor, electric motor -Power: 0.85 kW -Speed: 2800 rpm -Shaft: Ø 14 x 27 mm -Construction: B14 -Dimensions: 245/175/H140 mm -Weight: 5.8 kg
x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Number: 4x available -Price: per piece -Dimensions: 420/320/H225 mm -Weight: 41 kg
Electric motor, three-phase motor -Power: 1.5 kW -Speed: 710 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 420/320/H225 mm -Weight: 41 kg
TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...
KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...
Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...
Siemens Vacuum Contactor 450 Kw Coil 230 Volt Used
MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024
Control unit, control panel, control panel, control unit, keyboard, screen, control -Foot switch comes from a Trumpf punch type Sunimat 400 -Dimensions: 280/140/H150 mm -Weight: 4.4 kg
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...
Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1315 rpm -Shaft: Ø 9 x 20 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 11x available -Dimensions: 185/108/H155 mm -Weight: 3 kg
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...
Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1320 rpm -Shaft: Ø 11 x 20 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 235/170/H170 mm -Weight: 4 kg
longitudinal travel: 1 mm cross travel: 1 mm table length: 1 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,5x0,8x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4 , 300 mm, 200 mm
I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !
ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 920 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 280/200/H210 mm -Weight: 11.8 kg
geared motor, electric motor -Power: 0.6 kW -Protection class: IP 22 -Price: per piece -Quantity: 1 available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg
Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle for: workpiece clamping -T groove: 14 mm -T groove spacing: 64 mm -Threaded holes: M12 -three-sided: can be clamped -Dimensions: 560/445/H145 mm -Weight: 170 kg/piece
Specifications: Maximum turning length 90 mm Circulation diameter over bed 220 mm Circulation diameter over support 110 mm Center width 160 mm Bore 23 mm 3 speeds 350 / 700 / 1400 rpm
Spine cutter HORIZON BQ 270 / 440 / 460 Art.: PS2821 Ersatzteil Nr. / parts No. 63643 (9822849) (M011440-03) Quality : Tungsten carbide Made in Germany Dimensions: 178 x 76.1 x 5/4 mm. Number of teeth: 40 (there is a variant for 52 teeth)
Clamping angle for workpiece clamping -Dimensions: W/H/L 600/405/710 mm -Thickness: 26 mm -Surface: milled -Weight: 167 kg
Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 11.3 l/min -Number: 5x available -Price: per piece -Dimensions: 220/210/H120 mm -Weight: 2 kg
This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes
Fully Automated 4 Clamps Perfect Binder With PUR Gluing Unit from SM Klebetechnick GX2311, AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0,3 to 65mm, Cover Weight Range: 81,4 - 302,4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1350 Cycles/Hour, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Power Required: 400V Rotary Current 16A, 6,5 KW For Adhesive Binder and 400V Rotary Current 16A, 6,0 KW For Melting Unit, Standard Accessories
Format: Untrimmed: Min. 85x128mm, Max. 320x480mm, Format: Trimmed: Min. 80x120mm, Max. 315x475mm, Product Thickness: Max. 12mm, Capacity: 14000 Cycles/hour, Colour Monitor Touch Screen Control For All Functions, Automatic Format Pre-Setting, Feeders: 1 Hand Feeder, Horizontal Signature Feeders: 6x DHU 450, Vertical Signature Feeders: 2x DVU 450, Cover Feeder CHU 450, Stiching Unit ST 450 with 2 Stiching Heads 45-N14, Thickness Control, Delivery To The Left, Reject Gate For Incomplete Products, Three Knife Trimmer TR 450, With Heidelberg CHA Automatic Compensation Stacker, Delivery To The Left, Machine Condition: Excellent, Machine Was Complete Overhauldt In 2019, After That Was Very Rare Used
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...
INDUSTRIAL CONFIDENTIAL SHREDDER Type: Single-Shaft Shredding System Manufacturer: ERDWICH Model: M400/1-400 Condition: Used, very good condition, serviced. Power: 2.2kW 400v 50Hz 3Phs Screen Perforations: 12mm Description: Premium German designed and built heavy-duty, industrial, single-shaft shredder. Used for the size-reduction, destruction of confidential documents and materials, such as identification card and passports. Principle of Operation: Fully self-contained size-reduction solution, material is loaded, via the gas strut assisted door, at the top of the shredder. Material is shredded by a series of cutting tools, mounted to a rotor which passes through a static knife until small enough to pass through a perforated screen and discharged at the base of the machine. The shredder has both pneumatic pusher ram (introducing material to the rotor) and H²0 misting ( ...
Saw blade Diameter 350 mm Projection 77 mm Projection 45° 54 mm Clamp opening 84 mm Cutting size 4210x5140 mm
Dong Sung folder gluer Typ: 1FG-400 Farmacutical Age: 2002 Straightline 1 point gluing Barcode reader Free of damages. Available immediately
electric motor, three-phase motor -Voltage: 36 V -Power: 0.37 kW -Speed: 320 rpm -Shaft diameter: 19 x 40 mm -Dimensions: Ø 166/H192 mm -Quantity: 2 available -Price: per piece -Weight: 14 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 440 mm -Weight: 74 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 490 mm -Short taper mount for: bayonet disc mounting, cone size 8 -Hole circle: Ø 171.4 mm -Weight: 72 kg
Key data: 250 mm, 5 kW, 4700 m³/h
Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...
Key data: 17 mm, 40 , 1200 U/min
Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 400 mm -Conical mount with groove: Ø 105 mm -Passage: Ø 80 mm -Weight: 35 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Admission thread: M96 x 6 mm -Flange width: 42 mm -Dimensions: Ø 495 x 115 mm -Weight: 60 kg
Used decanter made by Alfa Laval model MRNX-414B-31G. New 1984. Drum diameter 1900/232 mm. Max sludge density 1.8 Kg/dm3. Drum speed 5000 rpm. Performance 8000 -10000 / h. - Drum length 1900 mm / 353 mm diameter - Max liquid density 1.8 kg / dm3 - Max speed 5000 rpm drum Technical documentation available.
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -Thread mounting type: M76 x 6 mm -Weight: 43 kg
Scrubbing machine, floor cleaning machine, mopping machine -Working width: 430 mm -Dimensions: 530/760/H860 mm -Weight: 50 kg
maximum number of results exceeded
please refine your search
