granulation plants used for sale (91)

This Colortronic is in machine storage at Plastima Used Machinery. The machine comes from 1993 and is in great condition. Brand: Colortronic Model: M200L Serial No: 72930024 feed opening: 200 x 200 mm Number of rotor knives: 4 blades Year of construction: 1993

This Colortronic is in machine storage at Plastima Used Machinery. The machine comes from 1991 and is in great condition. Brand: Colortronic Model: M400L Serial No: 74910029 feed opening: 400 x 160 mm Number of rotor knives: 8 blades Year of construction: 1991

This Colortronic is in machine storage at Plastima Used Machinery. The machine comes from 1987 and is in great condition. Brand: Colortronic Model: M400L Serial No.: 7491029 feed opening: 400 x 160 mm Number of rotor knives: 8 blades Year of construction: 1987

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

MEWA UG 1007 MS Power 160 kW Condition: used in need of repair Rotor blades: 25 pieces Stator knives: 10 pieces incl. hopper with pusher Switchboard Discharge chute Hydraulic Screen lifter Very few hours of operation. The machine has been unused for several years. Total weight approx. 15 t Delivery time : immediately

KG 50 Year of construction 2023 Condition new from stock Description cable shredder,cable granulator Technical specifications Shredder power 380 V 4 KW Total power 5.18kW Range 3 - 30mm Weight 515KG Can be inspected in Hungary 8000. Available immediately from stock.

STOKKERMILL K750 cable granulator-separator machine on order Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35 mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetric t ...

Recycling machine trade AGICOM-Pedergnana OG: The T150 cable recycling plant is suitable for the recovery of copper and aluminium from electrical cables. The T150 is equipped with an integrated turbine mill and also with a zig-zag separator - a novelty in this size! Due to these integral components, the T150 system is also ideally suited for the processing of mixed and stranded cables, as well as data conductor or EDP cables. Specifications Feed material: Mixing cable iron-free Throughput: up to approx. 150 kg / h

Recycling machine trade AGICOM- Pedergnana OG: The Easy 120/180 is a high-performance recycling system for the extraction of copper and/or aluminium from old and residual cables. The machine is characterized by a small footprint, simple operation and low energy consumption. Feed material: Electrical cable without impurities Throughput: approx. 60 to 120/180 kg/h

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Recycling machine trade AGICOM- Pedergnana OG: Cable recycling plant used consisting of single-shaft shredder MR1740; Granulator CGM4050; Zig Zag Separator; Turbine mill Ghibli 352; separator, filter tower; Throughput approx. 300 kg/h. Details on request!

Dear Sir or Madam, for you in the offer : Granulator/cutting machine available directly from stock! Can be used in cable processing/cable recycling, plastic shredding and destruction of plastic and plastic parts Granulator/Granulator/Granulator Type: RMH 16/22 VGA _ 4 KW Drive Power (See table for more data) Other granulator/cutting machine on request) RMH 16/22 VGA/drive power: 4 KW Features RMH Granulator: - A knife set is installed in the RMH Granulator RMH. - A sieve insert is installed (perforation as desired.). - The following screen inserts are available in stock: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm - V- Section Geometry - Lenze Electric Motor / Schneider Electric Box and Circuit Breaker - Easy tilting of the filling hopper - Available with wheels/2 x fixed castors/2 x brake rollers or adjustable rubber-mounted feet - Available with different bays 1) ...

Artech HD granulator SG 80 120 with 200 kW. Well suited for EBS, cables, used tires, plastics, AzV. Well maintained machine. Recently overhauled.

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Power: 300 350 kg / h the performance depends on type of cable Operation guarantee: 1 month The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable. Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must  ...

Granulator/granulator directly from stock available! Can be used in the cable processing and cable recycling, Kunstoffzerkleinerung and destruction of plastic and plastic parts Granulator/Schneidmühle type: RMH 16/22 VGA _ 4 KW drive power (further data see table) other granulator/granulator on request) RMH 16/22 VGA/power: 4 KW RMH granulator features: -In the RMH granulator RMH, a knife set is installed. -A sieve is fitted (drill holes on request.). -The following filter inserts are available standard production: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm -V cutting geometry â Lenze electric motor / Schneider Electric box and breaker -Slight tilt of the filler funnel -Available with wheels/2 x fixed castors/2 x brake castors or adjustable rubber-mounted feet -With various trays available 1) Insert as box, here the material out of the box out can be tilted (2) slide ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type choice: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our sepa ...

Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet

Heavy duty refurbished grinder. Very robust construction. Rotor with staggered blades. Rotor diameter 400mm rotor length 700mm. Powered by 22kW electric motor. Complete with electrical panel with Siemens touch screen panel including inverter for the control of the grinder. This electric panel can also control a loading belt, exhaust fan, etc. The control was built in 2010 for internal tests and used for less than 100 hours. As an alternative, we can also fit a new e.motor 37kW on this grinder and manufacture a new control panel for the increased power at an additional cost. This special rotor with staggered blades is also particularly suitable for heavy applications and for grinding fibrous materials and textiles

Capacity approx. 200-300 kg/h; various sieve decks; spare blades Auction-ID: A1-41983-50

Lifelong dynamically balanced rotor system in turbine quality Solid rotor with high momentum torque Swivelling screen track and removal of the screen without tools Solid Steel Bearing Flanges with External Bearing Complete soundproofing booth made of non-combustible material Connector plug: 32A Throughput: max. 300kg/h Inlet cross-section: 260 x 410 mm Motor power: 11 kW Rotor blades: 3 Screen hole diameter: 6 mm Stator blades: 2 Viewing is desired! Auction-ID: A1-43041-26

Consisting of MORETTO Frame CRD22-23, MORETTO Hopper 0TX120VP Pellet Dryer, MORETTO Hopper Loader F5 F40 Pellet Conveyor and MORETTO Dehumidifying XD22 Auction-ID: A1-42963-26

Auction-ID: A1-42963-34

With mobile base Auction-ID: A1-42963-33

Type: Industrial Granulator / Crusher Motor Manufacturer: SimoTop NV Power: 7.5 kW (approx. 2930 rpm, IE3, IP55, Class F) Description: Heavy-duty granulator with steel hopper, hinged cutting chamber, rotating knife rotor, multiple fixed counter-knives, and perforated screen for particle size control. Bottom discharge with flexible hose for material collection. Motor suitable for 400 V (Δ) / 690 V (Y), 50 Hz and 60 Hz operation (up to 9 kW). Dimensions (approx.): L: 1600 mm W: 1000 mm H: 2000 mm Weight: 850 kg Auction-ID: A1-43051-11

Industrial Granulator / Crusher VEM KPFR 132 M6 General Specifications: Manufacturer: VEM Antriebstechnik AG Model: KPFR 132 M6 Year of Manufacture: 1992 Serial Number: 68832 / 216 F Power: 4.0 kW Condition: Used Description: Industrial granulator / crusher unit for processing brittle materials (stone, scrap, mineral waste) Equipped with steel hopper and internal rotating cutter assembly Driven by VEM 3-phase motor (KPFR 132 M6) Rated speed: approx. 940–955 rpm @ 50 Hz; up to 1150 rpm @ 60 Hz Motor specs: Insulation class F, protection class IP54 Voltage range: 380–420 V / 660–690 V (50 Hz) Mounted on wheels, with emergency stop and control box Estimated Dimensions: Length: 1,500 mm Width: 900 mm Height: 2,000 mm Weight: 600  ...

Type: Industrial Granulator / Plastic Grinder Model: Piovan RN1523 Manufacturer: Piovan Plastics Technologies Year: 2000 Serial Number: OGR 4167 Power: 4 kW (Lafert ST 112M S4 motor) Condition: Used Description: Granulator for plastic and brittle materials. Includes steel cutting chamber with rotating knife rotor, fixed counter-knives, and perforated screen for particle control. Bottom discharge outlet. Sound-dampened hopper-fed housing. Emergency stop and removable collection tray. Motor: 3-phase, 400 V / 50 Hz, 1440 rpm (up to 4.6 kW @ 60 Hz) Application: Plastic scrap recycling, size reduction of rejects or mineral-filled parts in production lines. Dimensions (approx.): L: 1400 mm W: 900 mm H: 1800 mm Weight: 240 kg Auction-ID: A1-43051-10

Auction-ID: A7-42665-4