129,384 used machines on RESALE, but how to find them? Machine Search
I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.
Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...
2 Hot melt glue machine Meler, glue melter, 5 liter hot melt glue - used - : Price per piece from location: only 2.950.-€ (net)! Manufacturer: Meler Type: Micron 5 Year of manufacture: 2018 Ref.: 101002240 Micron 5/4 N Serial number: e.g.: 1J800918 Outputs: 4 TANK CAPACITY: 5.15 liters MAXIMUM ALLOWED BLOCK VOLUME DIMENSIONS OF 192 mm DIMENSIONS W 182 mm DIMENSIONS C 106 mm MAXIMUM MELTING CAPACITY: 9 kg/h () PUMPING CAPACITY 29.3 kg/h pump 7 cc () 66.0 kg/h Pump 19 cc () NUMBER OF OUTPUTS: 4 TEMPERATURE RANGE: 0 A 200°C (104 A 392°F) Optional: 40 A 230°C (104 A 446°F) TEMPERATURE CONTROL: RTD ± 0.5°C (± 1°F) MAXIMUM OPERATING PRESSURE (AT 6 BAR): 81.6 bar (1,183 psi) DIMENSIONS (L X A X H): 587 x 341 x 481 587 x 341 x 628 (lid open) WEIGHT: 37.5 kg (without filling) 1-N/PE 230V, 50/60 Hz, 7.1 kW 3-N/PE 400/230V, 2.4kW, Condition: good Avail ...
Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator -kicker -Counter -pre breaker without electronic gluesystem
SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm
SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES - working width 1300 mm - n. 2 rollers - Year 2004
Format range: Max. sheet size opened: 2300 x 1000 mm Min. sheet size opened: 380 x 160 mm Min. sheet size folded: 185 x 130 mm Equipment: Longitudinal seam, folding bottom, double margin, 4 + 6 point gluing, electronic glue mill HHS XTS-E16 cold glue system, BJ. 2023 with 8 application heads, counters, fully automatic format setting, boxflow control with Touchscreen display, extended pressing station, ACE feeder with vacuum, material: Corrugated board with corrugated A, B, C, E, F, FE, EE, BE, BC, solid board: 800–1500 g/m², Maximum mechanical speed: 250 m/min, Bahmüller Retrofits 2025, including fully automatic SMB COR-Flex bundling machine. The machine is in very good condition and can be used by arrangement in production.
Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS
Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device
RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis
Format Range: max. 2250 mm min. 340 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS XP-E08 with 6 application heads, Primary crusher left, counter, motorized format setting, Friction feeder with vacuum and cycle control, digital position indicators, motorized transfer station, Folding middle station, UV marker, 3 x cutting alignment on the press belt, extended press belt. Overhaul 2023: cleaned, tested, painted and with new conveyor belts, as well as equipped with new transport baths. Miscellaneous: The machine can be viewed while it is running by arrangement.
ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.
Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...
Folder Gluer Jagenberg Simplex Universal 875 Baujahr/ Year 1982 - Serial-No. 8128 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Material 160 - 600 g/m2, Vollpappe und Wellpappe bis 4mm Format max. 600mm x 875mm / 24" x 34" Format min. 70mmm x 55mm / 2.75" x 2.25" Maschinenabmessung BxL 1500mm x 6800mm / 59" x 268" Länge Pressband 2600mm / 102" Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
glue spreading machine -Diameter roll: 237 mm -working width: 1525 mm -Shaft: Recording: see photo techn. drawing -Total dimensions: Ø 237 x 2010 mm -Weight: 127 kg
Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm
Block size press Müro 4x5000/A3 WT; cleaned and tested; 2x dryer; insertion width 525mm; Insertion height 525mm. Padding press Müro 4x5000/A3 WT; cleaned and checked; two heaters; working width 525mm; working hight 525mm.
Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg
Heißleim Klebstoffsystem - Hot Melt Glue Machine Nordson Meltex MX 4012-1X2 Year 1995 - Serial-No. 01031295 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Müller Martini Econobinder EB II Year 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
agenberg Diana 145-4 Type: Folder Gluer Year Built: 2000 Condition: Good Availability: May 2026 General Machine Configuration Jagenberg Diana 145-4 Large format folder gluer in the 145 cm class Suitable for corrugated box production, especially for large-size and heavy-duty boxes Main Units Identified from the Photos 1. Feeder Section Automatic feeder unit Suitable for large-format corrugated board feeding Adjustable side guides 2. Folding and Transfer Section Extended and wide transfer section Multi-belt transport system Stable sheet transport for large box formats 3. Gluing System Cold glue (PVA) infrastructure available Valkomelt gluing system 3/4-point gluing capability Multiple glue gun connection infrastructure 4. 4-Point Folding Unit Suitable for crash-lock bottom / 4-point carton production Important feature for value-added box styles 5. Pr ...
Kartenkleber für Sammelhefter - Card Gluer for Saddle Stitcher Mueller Martini 315 Type C 422 Year 1996 - Serial-No. 99.12964 C 422 Robatech Gluning unit - 1 gluing noise Card Gluer for Saddle Stitcher Mueller Martini 300-321-335 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: Capacity: 6,000 bph at 1L bottles Number of aggregates: 2 Accessories: Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck Various spare parts included
Block size press Müro 4x5000/A2 WT; cleaned and tested; 3x dryer; insertion width 700mm; Insertion height 525mm. Padding press Müro 4x5000/A2 WT; cleaned and checked; three heaters; working width 700mm; working hight 525mm.
Encolleuse Bürkle RCG 700 Bürkle RCG 700 2017 Find more here - /
Müro A3/2000 WT block size press; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insertion height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.
2010 Burkle RB A glue application machine purchased in 2010 The machine can either be resold or serve as a spare parts donor Space requirement: approx. 16x7.0m Connected loads: Nominal power 20Kw Main components: Heavy-duty chain conveyor, roller conveyor Gantry unit with vacuum pump Glue application rollers ALTEK lifting table type AEA-30.12 Machine list Basic equipment Item 10 Heavy-duty chain conveyor Item 20 Portal stacker Item 30 Roller conveyor with centring unit Item 40 Roller conveyor Item 50 Roller applicator Item 60 Platform for roller applicator Item 70 Roller conveyor Item 80 Angle transfer Item 90 Scissor lift Item 100 Working platform application area, manually adjustable Item 110 Glue feed Item 10 Heavy-duty chain conveyor Item 10 Heavy-duty chain conveyor For pallet feed A welded frame made of rectangular steel bars with height-adjustable feet. Th ...
Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.
Hot Glue Gun SCA SCHUCKER AK 310-10/H/230V 7845.1000 D Heizung AK 400-450 230 V 0642.1003 New ! Dimensions: 230 x 100 x 130 mm
- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production
Format range: max. 680 mm min. 126 mm Equipment: Longitudinal seam, disc underglue unit left, Vibrator & dental gauge on the feeder, Bobst CUBE control, primary crusher right and left, kicker, counter, fully automatic format setting with program memory, pneumatic, intermittent press belt. Overhauled 2022: cleaned, checked, painted, new jetty and Transport belts.
3 boxes x hotmelt HM-180 (5kg bag) remainder Art.Nr. 995.18.02 (L985) 75€ for 3 cartons
Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...
Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at machi ...
maximum number of results exceeded
please refine your search
15 € 
