glue all categories

Max from 900 mm, min. 126 mm, longitudinal seam, folding back, double edge, electronic glue Oberwerk HHS C-1100, 8 channel with 2 applicator heads, washers under Glue factory left, Shaker on the investors, dental teaching to the investors, primary crusher, right and left, kicker, counter, digital Position indicators, additional Mitteltransport in folding, electrically adjustable lower transfer stations, pneumatic, switched mode press band. Overhaul 2018: cleaned, inspected and equipped with new conveyor belts.

capacity: 45000 b/h Power consumption: 25,2 kW weight: 6 t formats: bottles: 0,5 l NRW, 0,33 l Vichy, labels: neck, body, back Direction: Right-left equipment: 2 cold glue aggregate (manufacturer: Timmer, y.o.c.: 2010), dating (laser, manufacturer: Domino, y.o.c.: 2011)

Auxiliary device for folding carton Gluer Jagenberg, maximum working width 1150 mm, its own new servo main drive (stand alone), speed adjustment via digital position indicator, Encoder on the existing Gluer, Shaker am Investors, servo-controlled vacuum cycle investors top/bottom, Jagenberg DBS01 control. Overhaul 2018: cleaned, tested, painted, new investors and conveyor belts.

Capacity: 54000 bottles/h weight: 5000 kg formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles Machine pitch: 120 mm, 30 bottle dishes Direction: Right-left Operation / control: Heuft equipment: labels: body, breast-, rear label, 2 cold glue aggegratesBottle blow-off before, light barrier with height detection in the outlet, discharge switch

Output: 120,000 bottles/h.

Format: 0.25-1l, output: 15,000 bottles/h, controls: KS Control PLC IV, with Optical Adjuster BULL, including tools and accessories, available after January 2019.

Martin TransLine 1228, 1987 Ref.Nr: 2610 manufacturer Martin model TransLine 1228 year built: 1987 speed: 15,000 sh/h Max sheet size: 280cm availability: immediately condition: good price: on technical request spezification: â?¢ Martin Prefeeder â?¢ Martin feeder â?¢ Martin 3 printing units â?¢ Martin Slotter â?¢ Martin the cutter â?¢ Dynatec DY 2008 glue station â?¢ Martin folder Gluer â?¢ Cyclop Ampag 1500 banding machine â?¢ Martin miscellaneous

Weight approx.: 130 kg Dimensions (l x w x h) approx.: 1720 x 930 x 1350 mm Description: Internal reference 744.124, Serial number 3104, For preglued edges, Automatic feed of the edge, Total power 3.30 kw, Adjustable temperature from 0° C up to 500° C, Workpiece thickness: min 11 mm - max. 65 mm, Feed speed approx. 4.50 m/min, Snipping unit, Rough trimming unit

Bottling line for returnable glass bottles, approx. 40,000 bottles / hour. Suitable for the filling of beer, mineral water and fruit drinks. Scope of supply: Glass Filler KHS-Delta SVF 120 / 24 KK Bottle Turner Sterile fix Dosing Device Velcorin Dating Device Video Jet Bottle Cleaning Machine KHS Omega Kaskana 39/87 ERX 21 incl. label press Hormes Labeling Machine Krones Topmatic Hot and cold glue Crate Washer Drill R 50 Decapper Rink KM-670 / 3 K Foreign Bottle Detection Recop Inspection of bottle height, diameter, shape. Crater KHS Garant A1-2500 Decrater KHS Garant A1-2500 Depalletizer (2 x) KHS Markant S1-1EKH1-PL Palletizer (2 ...

Weight approx.: 7000 kg Dimensions (l x w x h) approx.: 9500 x 2500 x 2500 mm Description: Finger joint complete with end-piece, with glue unit, loading / unloading group, press insert, 6000 mm press length https://www.youtube.com/watch?v=BvOjBIsiwVc&,t=4s

1621 lamina BL-laminating machine Max. sheet size: width 1600 mm, length 2000 mm min. sheet size: width 300 mm, length 300 mm top sheet 130-450 gm/m2 bottom sheet from 250 gm/m2 is 0.6-10 mm Glue water based adhesive register accuracy +-0.5 mm operating speed up to 5500 sheets/hour automatic top sheet feeder Automatic bottom sheet feeder precision gluing with automatic glue application laminating station with automatic front and side registration system pressure belt PLC control system hand delivery

Weight approx.: 20 kg Dimensions (l x w x h) approx.: 810 x 450 x 160 mm Description: For pre-glued edges

Offer consists of:-paper - folding machine DC-445 / DC-F1 DocuCutter of Duplo DC-445 / DC-F1 Scribers / folding machine for digital printing: Creasing machine DC-445: -Feeding: Band with suction device -Capacity of the feeder: 100 mm -Paper size in the feed: Width: 140 mm - 320 mm Length: 150 mm, deep 650 mm Standard tray holds documents with a length of up to 460 mm An optional feeder tray in long version is available for longer documents. Minimum end machining size at the slitter (optional equipment): width 48.0 mm -Type of paper: uncoated paper, coated paper, laminated paper -Paper weight: 110 g / m2 - 300 g / m2 Paper waves in +/-3 mm -Speed: 50 ppm (A4 SEF 1 ...

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 1250 x 800 x 1200 mm Description: For pre-glued edges, power 4.5 KW

1100 mm, min. 66 mm, longitudinal seam, folding floor, 4 + 6 point bonding, electronic glue Oberwerk HHS X-tend, 8 channel with 4 heads of mission, high pressure with Pinball ejector control and code reader, disc under Glue factory left, electronic overtaking folding with servos, investors with vibrator and Harari, vacuum on the feeder, Anlegerriemenschnellverstellung, cutting alignment after the investors right and left, 2 additional belt transport stations in the alignment, primary crusher, right and left, kicker, counter, Bobst cube controller, Digital position indicators, 2 x motorized auxiliary station for folding tool, vacuum at overtaking folding, additional retractable lower middle s ...

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 7000 x 1500 x 1800 mm Description: Single Sided, 3mm Max Edge Thickness, Pre-Milling Unit, Edge Coil Mag, Gluing System, Pot & Premelter for Polyurethane Glue, 4 x Pressure Rollers,Twin Motor (0.18kW) End Trimming Unit,Twin Motor (1kW) Fine Trimming, Twin Motor (1kW) Corner Rounding, Radius Edge Scraper, Glue Scraper, Buffing Unit, Air Heating Unit, MAGELIS Control System, Serial No AH/004264

Power supply 11.5 kW Exhaust fan with dust bag 3400 mm long with boom Depth with edges plate 1280 mm Weight 600 kg Edge thickness up to 5 mm Glue height 55 mm Feed speed 11 m / min Yoke caps 1 milling unit phase 2. milling unit RADIUS Compressed air supply 7 bar

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 6000 x 1500 x 1200 mm Description: Machine for thin tape and 2mm pvc . Pre-Milling Unit, Auto Timed Intervention, Edge Coil Mag, 1 Position, Gluing System With Hot Melt Pot, Roller Set To Press Edge, End Trim, Fine Trim To Trim & Round, Multi Function To Trim & Corner Round, End Scrape, Glue Scrape, Buffing Unit

Power supply 400V 7, 2kW Suction Ã? 1 x 70 + 1 x 100 mm Workpiece thickness min/max 6/45 mm Workpiece length of min 180 mm Workpiece width of min 60 mm Roles - and stripes Edge magazine rolls in 1901 to 3 mm Glue nozzle 1906 Printing unit 1914 End trimming unit 1976 edge thickness of 13 mm Milling unit 1943 flush 12 mm Milling unit 1942 R2 Milling units 1942/1943 as currency units RADIUS scraper 1927 Buffing unit eintauchen 1944 pneumatically controlled Edges have control over DAZ 11 Compressed air connection of min. 6 bar

New CNC drilling- and dowel inserting machine\r\nBrand: VITAP \r\nType BLITZ 2\r\n\r\nTechnical Data:\r\nHighly efficient and reliable thanks to an easy software.\r\nIdeal for JUST IN TIME production or mass production.\r\n\r\nMachine standard equipment:\r\n- drilling head 3.500 rpm\r\n- 3 horizontal indipendent spindles\r\n- 3 vertical indipendent spindles\r\n- 1 glue and dowels inserting unit\r\n- 1 vibrator conveyor\r\n\r\n2 working Areas\r\n- 2 sides reference stops (dx,sx) on the working table\r\n- 1 central reference stop on the working table\r\n- 4 clamps\r\n\r\nWorking area horizontal head:\r\nX= 1300 mm\r\nY= 50 mm\r\nZ= 50mm\r\n\r\nInserting glue and dowel unit:\r\n1 glue and dowel ...

Profile wrapping machine with wood veneer in sheets (depending on choice of paper foil from the roll) Application of hot-melt glue EVA/APAO using roller. Machine no. 11739-09-2000 profile width 40-300 mm Profile height 2-80 mm profile length of min. 800 mm The glue temperature 220 ° C Transport wheel diameter 200 mm Width of the wheels 2 x 15 mm The maximum adjustable distance between wheels 250 mm Transport speed 0-60 m / min feed motor 3 kW motor power of Applikationskopfes 0.75 kW Working height 900 mm Motor power of the brush 0.37 kW IR lamps 2 wave lamps which are activated automatically once a workpiece arrives. Ideal for warming or glue reactivation or laminate softening  ...

Sawing-, drilling and dowel inserting machine\r\nBrand: Koch\r\nType: Centronic\r\nYear: 2000\r\n\r\nTechnical data:\r\n\r\nWorkpiece dimensions:\r\nLength: 188-1800mm\r\nWidth:\r\n- 20-150mm at 2 workpieces each field\r\n- 100mm at 2 workpieces each field, at 45 °\r\n- 300mm at 1 workpiece each field\r\nThickness: 10-40mm\r\n\r\nStandard equipment:\r\n- 1 Saw unit\r\n2,2 kW, 2800 rpm., saw blade clamp with quick change system, braking device for saw motor\r\nScoring saw 1,5 kW, 2800 U/min\r\n\r\n- 1 horizontal drilling unit\r\n2 kW, driller rotation speed 2800 rpm\r\nwith dowel hole blowing\r\n1 piece dowel hole driller\r\nhorizontal drilling distance over supporting table (Z): max. 50mm\r ...

Machines-Nr 14009. 07-04 Profile width 40-300 mm Profile height 2-80 mm Profile length of min. 800 mm The glue temperature 220 ° C Transport wheel diameter 200 mm Width of the wheels 2 x 15 mm The maximum adjustable distance between wheels 250 mm Transport speed 0-60 m / min Feed motor 1,5 kW Motor power of Applikationskopfes 0.75 kW Working height 900 mm Motor brush 0.37 kW Tank recovery levels 3 x 0.5 = 1.5 kW Resistance of the Applikationskopfes 3 x 2,5 kW = 7,5 kW Hot melt adhesive resin extruder 2.25 kW Resistance injector extruder from hot melt Adhesive 12 x 0.7 kW = 8.4 kW Connection value total kW 30 Compressed air 6 bar Air consumed 30 NL/min (Errors and o ...

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 1800 x 1020 x 1400 mm Description: For pre-glued edges, max working height 70mm, blanking machine, gluing unit, edge pressure unit, trimmers and motorized feed system

Mobile Power 13kW 380V Length 6000 mm Edge plate width 1000 mm additional edge plate for large rolls Glue unit with glue roller height 60 mm To glue er thickness 15 mm two feed speeds 12 + 18 m / min Operating pressure 6 bar Dust nozzle 140 mm Weight approx. 2100 kg Yoke caps Flush trimming unit Rundungsfraesaggregat RADIUS scraper a buffing wheel front engine

serial number: 0-261-04-3945 Weight approx.: 3000 kg control: PC 16 Dimensions (l x w x h) approx.: 6360 x 1500 x 2200 mm feed: 14 Bei Einsatz Formfräse 11 m/min edge thickness: 0,4 - 12 mm workpiece thickness: 8 - 60 mm mm joint trimming unit: 2 x 2,2 kW snipping unit: 2 x 0,27 kW rough trimming unit: 2 x 0,55 kW profile trimming unit: 2 x 0,35 kW flat scraping unit: ja / yes profile scraping unit: ja / yes edge buffing unit: ja / yes total power approx: 12,9 KW Description: ? inlet ruler adjustable ? Automatic chain conveyor central lubrication ? Pneumatic adjustment caps chamfer / straight ? Pneumatic 2-point adjustment of side rollers for Machining of bevel / radius ? Pneumatic 2-point  ...

Power 380V 17,5A 9, 5kW Quick heating pool Rotary frequency converter Caps saw unit 18000 RPM Flush trimming unit / rounding Dust nozzle 100 mm Weight approx. 550 kg Chassis Solid edges up to 5 mm Roll edges up to 3 mm Glue height of 50 mm Support rail Length 3100 mm boom

serial number: A0104/6521 Weight approx.: 3500 kg Dimensions (l x w x h) approx.: 8000x2400x2400 mm setting measure approx (l x w x h): 8000x2400x 3000 mm packing measure approx (l x w x h): 8000x2400x2400 mm Description: KOCH Centronic sawing boring and dowel driving machine Working areas - 2 separately swiveling stock support tables - 2 tiltible stock fences with LCD length readout Stock dimensions: Length: 188 - 1800 mm Width : 20 -150 mm ( 2 fields) 20 - 100 mm ( 2 fields 45°) 20 - 300 mm ( single field) Thickness: 10 - 40 mm Working units: - 1 saw, 2,2 kW , Sawbladedia. 300x30 mm - 1 scoring unit , 1,5 kW ( Blade dia. 150x30mm) - 1 drilling unit 2,0 kW 2800rpm - Glue injecting and d ...

Power 380V 7kW heated infeed fence Glue tank Tracking/opposite 4 St. pinch rollers Butting saw unit with 1 blade Caps scissors up to 3 mm Flush trimming unit / rounding Suction connector 160 mm electrical converters

Weight approx.: 1400 kg Dimensions (l x w x h) approx.: 4900 x 1200 x 1500 mm Description: Machine with glue tank, applicable edges, min height 10 mm, max height 60 mm, rroll min thickness 0,6 mm, max 3 mm, slat min thickness 1 mm, max 20 mm, machine composed of: gluing unit, cutting unit, overlapped trimming unit, tilted trimming unit

Code: 0492 Brand: ITALPRESSE Model: R/4 - CE Standard Automatic glue spreader with 4 rollers - CE Standard Technical data: Working lenght mm 1400 Max working thickness mm 100 Working speed mt/min 22 N°2 varnishing rollers diameter mm 210 covered in syntetic rubber acid-proof N°2 dosing rollers diameter mm 185 covered in ebonite Automatic roller washing Safety protections Overall dimensions : mm 2100 x 1000 x 1550 h Weight kg 1000

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 1540 x 1200 x 1410 mm Description: Working height 60 mm, applicable thickness 1 mm, working table 750 mm, air pressure 6 bar, single-phase engine

There are two identical component placement systems available, x-travel: 500mm, y-travel: 500mm, z-travel: 40mm, length: 1220mm, width: 1220mm, height: 1500mm, weight: 850kg, including glue dosing, CE marking is missing and needs to be replaced.

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 1950 x 750 x 1480 mm Description: Gluing rollers length 1300 mm, passage max thickness 100

Ref. 346 Perfect binder Horizon BQ 240 Serial: 76207 Binding thickness: 1 – 40 mm Hot melt, spine and side glue, milling station, automatic cover feeder, automatic cover pressing device Book spine length max: 320 / min: 75 mm Cover max: 650 x 320 mm Speed with milling max: 410 books/h / no milling max: 600 books/h Weight: 510 KG Voltage: 380 V / 1,5 KW / 50 Hz Cleaned and checked. Test in our showroom possible!

Weight approx.: 450 kg Dimensions (l x w x h) approx.: 2700 x 700 x 2400 mm setting measure approx (l x w x h): 2650 x 700 x 2600 mm Description: - 5 vertical Hyrdaulik cylinders - Height adjustable heating rail with counterweights

Jagenberg Diana 105-1 Ref.Nr: 2533 manufacturer Jagenberg Diana model 105-1 year built: 1985 Max sheet size: 1050 mm availability: immediately condition: good price: on technical request spezification: â?¢ 3 point glue â?¢ lock bottom gluing â?¢ ELC glue system with 2 guns â?¢ Lower glue pot â?¢ lock down crash and straight line

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 5000 x 1500 x 1700 mm Description: SPEHOMA SP 904 Belt Conveyor with Gluing Unit Max. transport width approx. 650 mm, conveyor belt length approx. 4850 mm, belt width approx. 30 mm, gluing unit with 11 vertical glue application nozzles, these are height-adjustable via pneumatic cylinders as well as vie electric motors in Y-direction

1150 mm, min. 45 mm, longitudinal seam, folding floor, double edge, 4 point bonding, electronic top glue piece with 4 applicator heads, washers under Glue factory left, electronic overtaking folding of servo feeder with vacuum & vibrator, pre-breaker right and left, kicker, counter, Digital position indicators, additional Mitteltransport in folding, additional Mitteltransport in the primary crusher, motorized Threading station, vacuum in folding, Jagenberg DBS01 control, motorized size setting, safety light curtains right & left. Alignment on the press line, pneumatic, switch-mode, long press band. Machine overhaul in 2016.

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 780 x 600 x 1400 mm Description: WIWA DA 10:1/72 Double Acting (Glue) Piston Pump Max. flow rate 72 cm³, mounted on 2 pneumatic cylinders and thus height-adjustable

915 mm, min. 45 mm, longitudinal seam, discs under Glue factory left, primary Crusher right and left, kicker, counter, vibrator to the investors, digital position indicators, small box set up, switched mode press band. Overhaul 2018: cleaned, tested, painted and equipped with new investors and conveyor belts.

Size: 1.040 x 1200 Technical details: Min. size: 210 x 310 mm Max. size: 1.040 x 1200 mm Speed: 40 Equipments: TPM paperdust exhaust unit Speed 40m/min 8g/m² glue TPM coating unit Katana 104 Feeder: Mabeg M3 / 1200 Calender: TPM Brush and rubber rollers Lamination unit: TPM Katana 104 suction tape board Hot water Tool Temp

Formteikantenanleimmaschine IMA PCA stating direct glue glue basin and strips the length unit A video of the current machine can be sent on request. Built no cheap edges moped, but industrial-grade by IMA for continuous use. This model was built by Brandt also referred to as KTD 82 H and KTD 820. For hot melt adhesives and PU adhesive, 140-220 ° c. Inner radii are dependent on the bending capacity of the edge material from approx. 150 mm, external RADIUS. Adjustable heater for heating of the material of edges with narrow radii. When you select of the emitter, the feed speed are automatically lowered to the preset value (very useful for narrow radii). Edge thickness of 0,4-3 ...

Etikettier Maschine Heiáleim 12 Teller ID5478

Technical data: Brand: Homag Type: KR 077 Year: 1993 Flush cutters End trimming unit -Buffing wheel Uni cutters -Radiusziehkling

Brushing machine\r\nBrand: Langzauner\r\nType: RBM-1500/4\r\nYear: 2007\r\n\r\nThe RBM-1500 is a powerful fully automatic cleaning machine for the back of 3D furniture fronts. The automatic size recognition of the furniture fronts makes it possible to adapt the machine to constantly changing loads without any loss of time in a continuous process. The glue residue on the backside is removed, thereby achieving optimum edge quality.\r\n\r\nThrough the use of a controlled brush unit (automatic height adjustment 15mm-38mm), the back of the 3D furniture front and the workpiece longitudinal edges are processed in one pass, thus achieving a processing speed of 2000 work pieces per 8 hours (rectangul ...

á?³ power: 22.3 HP (16.4 kW) á?³ machine operation via touch screen with colour display á?³ edge thickness min/max: 0.4 8 mm á?³ workpiece thickness min/max: 15-60 mm Njapv á?³ min. workpiece width: 60 mm á?³ min. workpiece length: 140 mm á?³ endless edge feed Edition plates 800 mm for PVC/ABS/thick veneer edge banding á?³ Fügeaggregat, 2 eintauchen-controlled milling units 12000 rpm, 1.5 HP (1.1 kW), maximum chip removal can be set up to 1.5 mm, jointing cutter with diamond cutting diameter. 60 x 56 mm á?³ shears for continuous edging material up to 3 mm thick á?&sup ...

CNC working centre\r\nBrand: Homag\r\nType: Optimat BAZ 232/40 / K\r\nYear of construction: 2003\r\n\r\nsummary\r\n2 retractable and removable exchangeable feet\r\n\r\nclamping table\r\n- two-part worktable with 2 processing stations for pendulum assignment\r\n- for loading and unloading, the clamping table moves forwards out of the travel range of the machine\r\n- 8 clamping consoles with tubeless vacuum guide (4 consoles per table)\r\n\r\nPower Control\r\n- Power Control - PC85 control with PLC control\r\n- Color monitor 17 inches with PC keyboard and mouse\r\n\r\nSoftware:\r\n- Woodwob 5.0 operating system.\r\n- WoodWOP for graphical, dialog-oriented creation of CNC programs incl. Postpro ...