glue used for sale

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0,5 - 1 mm Feed speed: ca. 4 m/min Only coil edges

BIMATIC edge banding machine model SYNCRO 4105.8 : - Electronically controlled control panel - Usable panel thickness from 8 to 45 mm - Forward speed 10 m/min - Overall dimensions approx. 5.1 x 1.2 x h=1.6 m - machine according to CE standards, year 1998 Operating units: - Gluing unit with: hot-melt glue pot with rapid heating (about 5/6 min.) loader and shear for roll material from 0.4 to 3 mm loader for solid strips up to 8 mm - Double vertical trim panels, 0.3+0.3 hp motors, tiltable 0 - 15° - Overlapping trimmers, non-tilting, 0.5+0.5 HP motors - 0 - 25° tilting trimmers, 0.5+0.5 hp motors - Rounder with 1 engine HP 0.5 - Straight edge sander, HP 2 motor

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition

Code: 0253 Brand: CEHISA Model: BRYKO - CE Standard Automatic edge bander for wood, Pvc, veneer, abs, melamine edges - CE Standard Technical data: Edge thickness min/max 0,4/2 mm Min/max panel height 8-40 mm Min panel length mm 120 Min panel width mm 75 Panel feed speed mt/min 5,5 Composition: Gluing unit: Glue tank with digital thermostat - Automatic feeder for roll and strip edges - 1 motorised roller + 1 idle roller 2-blade End cutting unit with high-frequency motor - Tool rotation speed 12000 rpm Upper and lower trimming unit - Tool rotation speed 12000 rpm Total installed power Kw 2,5 Compressed air 6-7 bar Overall dimensions mm 1800 x 950 x 1200 h Weight kg 430

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition

Description: Edgebander with glue pot, edge trimming unit, trimming unit, feed with various speeds, suitable for gluing solid wood up to 3 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 1,400 mm, weight approx.: 780 kg

Description: Edgebander with glue pot and the following units: End trimming Roughers Fine trimmers Edge scraping Brushes Complete with bar for holding particularly large workpieces Approx. Onsite Dimension. (l x w x h): 4,000 x 1,800 x 1,600 mm, weight approx.: 1,800 kg

Description: Edgebander with glue pot for edge and solid wood End trimmers Edge Trimmer and spindle moulder with programmable intervention 2-speed adjustable feed Approx. Onsite Dimension. (l x w x h): 3,900 x 1,200 x 1,800 mm, weight approx.: 1,050 kg

Machine: Automatic horizontal cartoner with reciprocating movements. Product: Blisters, strips, trays, rigid or flexible tubes, bottles, sachets, soaps and other products food or cosmetics. Usable material: cases with opposite or alternating legs in compact cardboard with a weight ranging from 220 to 400 g/m², pre-broken and pre-glued. Closing: By retracting legs or by hot glue distributed by commercially available nozzles., Cadence / min: 20 to 140 cycles/min , Elec: 400 V / 50 Hz / 8.6 A , A + B (mm): max 140 , A (mm): min 15 / max 90, B (mm): min 12 / max 70 , C (mm): min 50 / max 200

CNC gluing station, manufacturer: MAW / NOTTMEYER, year of manufacture: 1999, serial no.: 80560002, multi-spindle drilling unit, 11 drilling spindles, pitch approx. 32 mm, pneum. Clamping table, gluing unit, glue pump WIWA, controlled stop system, panel transport system, PLC control with operator panel, Fabr. Siemens, type Simatic OP 27, infeed belt conveyor belt, aluminium transition bridge, (hammer bid is conditional, sum of bids 334-350 or collective bid of item 333 will be compared after the auction ends)

Edge processing line, manufacturer: HOMAG, type: KFR 10/47/PU, year of manufacture: 1995, serial no.: 0-202-25-3100, consisting of: infeed table, type TB 10/25/20/R, serial no. 3100, Aggregate equipment: scoring saw, 3 jointing cutters, 2 chippers, 2 edge magazines, 2 glue units, type Q34, 2 radiant heaters, 2 cross-cut units, 2 flush milling units, 4 form milling units, 2 groove units, multifunctional blade, 3 surface/radius scrapers, 2 polishing units, discharge table, workpiece return LIGMATECH ZHR30/R/295, year of manufacture: 2011, serial no. 6276, 3 belt conveyor belts approx. each 1,000x80x110 cm, control HOMAG Homatic NC 30, control cabinets, safety fence system, approx. 10 running metres. Heavy-duty shelving, 4 levels, Contents: Edge material, Cabinet system, 14-door, Contents: Machine accessories, Tools, Set-up tools

Key data: 20 mm, 60 mm, 8365 mm

I am selling a fully equipped edge banding machine HOMAG EDGETEQ S-500 KAL370 Ambition 2484, built in 2019: Configuration: Input stop servo-motor adjustable Manually adjustable joint milling Edge banding with preheating tanks 2 pcs. Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling top + bottom pneumatically adjustable Round unit 4-motor servo motor adjustable R2 / second set R1 included Swivel groove saw unit Radius scraper blade Multiradius servo motor adjustable Scraper blade surface can be pneumatically adjusted Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 8-60mm Edge material thickness 0.4-12 (20)mm Feed speed 16 to 25m/min. Overall length including feed plate 8365mm Mileage status 833,000 meters. Input appar ...

Single-sided edge banding machine Brandt type OPTIMAT KDF 650 C edition Specifications: • Feed rate (m/min.): 8 - 18 • Feed max. with form milling machine (m/min.): 14 • Working height (mm): 950 • Pneumatic connection (bar): min. 6 • Overall length (mm): 6,060 Workpiece and edge parameters: • Workpiece width min. at workpiece thickness 8 - 22 mm: 70 mm (depending on workpiece length) • Workpiece width min. for workpiece thickness 23 - 40 mm: 120 mm (depending on workpiece length) • Workpiece width min. at workpiece thickness 41 - 60 mm: 150 mm (depending on workpiece length) • Workpiece protrusion (mm): 38 • Workpiece thickness (mm): 8 - 60 • Edge height max. = workpiece height (mm): + 6 • Edge Material Roll (mm): 0.4 - 3 • Max. edge cross-section for PVC: 135 mm² • Max. edge cross-section for veneer: 100 mm² • Roll diameter max. ( ...

Jacob White TFS Two flap sealer Serial: NS161C Stainless two flap sealer, variable speed, min box width 100mm to max box width 260mm, hot glue pots, mobile, 1Ph

T.Freemantle Ltd cartoning machine, model: S07, serial number: 16-1013, date: January 2017, 240 V, Nordson glue unit, model: MESA 4, total dimensions: 3800 mm x 1300 mm x 1700 mm.

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 45mm; Workpiece width: minimum 90mm; Glue basins: alternating granulate basins; Cross-cut shears: yes; Cutting / flush sawing: yes with corner round function; Milling station: chamfer/radius; Flat - Scraper: Yes; Radius Scraper: Yes; Inlet ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 2300 mm; Machine width: 1020 mm; Weight: 420 kg;

LINE FOR FILLING PET AND GLASS BOTTLES WITH CAPS AND CAPS ALL in ONE Produced until May 2022, taken straight from production by us Can fill PET bottles of various heights, glass bottles with plastic stoppers and glass bottles with caps THE LINE NEEDS RENEWAL, was dismantled from existing production, the owner produced without a PET blow molding machine, ordered ready-to-use empty 1.5 L PET bottles. He also filled 1 L glass bottles on the same line. In addition to the capping machine, it also has a capping machine. The bottleneck is a carbonator (7000 l/h). LINE Consisting of: Filling machine 50 filling nozzles Brand: Winterwerb Type: Combilima Year: 1977: Capacity: 14,000 pcs/hour. Electrical connection:380 V Weight:10600 kg Total dimensions L 5850 mm Total dimensions W 3150 mm Total dimensions H 2300 mm Description Minimum bottle height 150mm; Maximum bottl ...

Krones labeling machine, Robusta regularly serviced with documentation from Austria. Machine in Poland SUPER STATE! Well cared for! SN: 722-544, Up to 8000 bph Brand: Krones; Type: Robusta; Year of construction: 1996; Serial number: 722-544; Electrical connection: 380 V; Overall dimension L: 2300 mm; Overall dimension B: 3000 mm; Overall dimension H: 2500 mm; 2 vacuum cylinders, 3 labels, full documentation! comes from a very well-known jam and beverage factory in Austria, has always been regularly serviced! She applied the following labels: on hexagonal jars 196ml 90x122 hull, 28x45mm ride 385ml 89 x 167mm body, 75 x 50mm back 580ml 75 x 50mm (trunk and back) There are also a lot of spare parts: Spare parts package: 3 servomotors refurbished 1 servomotor new 2 plates for servomotors glue roller new small parts Clutch for the worm New value tens of t ...

Labeling machine, make Krones, type Universalla, year 1992, rotary machine for applying glue labels,, 1 labeling station,, was in use for glass and plastic bottles (vinegar and oil - 0.5 and 1.0 liters)., power: approx. 10,000 containers / h, depending on container and label

Code: 0259 Brand: HOLZHER Model: TRIATHLON 1425-420V - CE Standard Edge bander with grinding unit for wood, pvc, veneer, abs, melamine, solid wood, formica, solid wood and various - CE Standard Technical data: Edge thickness min/max mm 0,4/25 Panel height mm 60 Glue in cartridges Composition: Grinding unit for panel grinding - N° 2 cutters with adjustable infeed - Suction diameter mm 120 Gluing Unit with cartridge - Cartridge loader - N° 3 pressure rollers End cutting unit with 2 motors - Rpm 12000 Tilting trimming unit Tilting bevelling unit Edge Scraping Unit Rounding UnitAutomatic revolving Spindle Unit - Motor Kw 3,8 - Rpm 12000 Oscillating Brush Unit - Brush diameter mm 150 Hanging control panel Protection cabin Removable support roller conveyor Compressed air 6-7 atm Overall dimensions mm 7500 x 1000 x 1750 h Weight kg 3500 MACHINE NOT RECONDITIO ...

Overview This filling line was part of a whole brewery and was assembled in 2015 by German manufacturer Hormes. The line will be dismantled soon. The bottling line recently ran at 15,000 bph with 0.33L glass bottles. Components Glass Depalletizer | Hormes Set up for 1 pallet size, new glass pallet: 1000 mm x 1200 mm The chain hoist is driven by an electric motor. The traverse has a length of approx. 4,500 mm Fully automatic rinser | Hormes Capacity: up to 15,000 bph Number of spray nozzles at least 36 Equipped for 1 bottle type The inside of the bottles is sprayed with fresh water Spraying with fresh water approx. 1.5 sec., draining approx. 5 sec. Inlet auger, star wheels and guides are easily replaceable Machine cladding made entirely of stainless steel Electrical connected load: 230/400V, 50Hz, approx. 4 kW. With new S7 control system Automatic bottle filling and capping machine | KHS  ...

Used Bottle Washer Bodini 10 rows up to 4500 bph Efficiency of the Bodini 10 Row Used Bottle Washer up to 4500 bph The Bodini 10 row used bottle washer stands as a dependable choice for bottling operations ensuring a performance of up to 4500 bottles per hour Crafted entirely from stainless steel and featuring plastic baskets this machine offers durability and resilience over time Optimal Performance and Advanced Technology With its step by step advancement of baskets and the use of low pressure steam it guarantees effective cleaning Moreover thanks to integrated automation with automatic bottle loading and unloading manual interventions are significantly reduced maintaining a continuous flow of production Furthermore the label extraction belt further simplifies the cleaning process Kept in excellent condition the machine delivers high performance even after prolonged use Additionally it ...

Racupack case packer, type: CPA Catamaran I, serial number: 0809435, year of construction: 2009, 400 V, 3 Ph, 50 Hz, 20 A, weight: 2000 kg, plastic infeed belt, belt width: (2x) 50 mm, plastic mesh belt, belt width: 620 mm, chain conveyor with dividers, belt width: 300 mm, distance between dividers: 180 mm and 230 mm, plastic electrically driven outfeed roller conveyor, roller width: 400 mm, total dimensions: 6200 mm x 2550 mm x 2400 mm. Used for 12 x 1 liter, 6 x 1 liter and 6 x 500 ml cartons. Without glue unit.

Racupack case packer, type: Catamaran I, serial number: 0107399, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 20 A, weight: 2000 kg, plastic infeed belt, belt width: (2x) 50 mm, plastic mesh belt, belt width: 620 mm, chain conveyor with dividers, belt width: 300 mm, distance between dividers: 180 mm and 230 mm, plastic electrically driven outfeed roller conveyor, roller width: 400 mm, total dimensions: 6200 mm x 2550 mm x 2400 mm. Used for 6 x 1 liter and 6 x 500 ml cartons. Without glue unit.

Racupack case packer, type: Casepacker Catamaran I, serial number: 0409423, year of construction: 2009, 400 V, 3 Ph, 50 Hz, 20 A, weight: 1750 kg, plastic infeed belt, belt width: (2x) 50 mm, plastic mesh belt, belt width: 620 mm, chain conveyor with dividers, belt width: 300 mm, distance between dividers: 180 mm and 230 mm, total dimensions: 6200 mm x 2550 mm x 2400 mm. Used for 8 x 1.5 liter cartons. Without glue unit and outfeed conveyor.

Racupack case packer, type: CAT I, serial number: 0406378, year of construction: 2006, 400 V, 3 Ph, 50 Hz, 20 A, weight: 2000 kg, plastic infeed belt, belt width: (2x) 50 mm, plastic mesh belt, belt width: 620 mm, total dimensions: 6200 mm x 2550 mm x 2400 mm. Missing outfeed belt and glue unit. Used for 6 x 1 liter and 12 x 1 liter cartons.

Racupack case packer, type: CAT I, serial number: 1007400, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 20 A, weight: 2500 kg, Meler glue unit, model: Micron+5, plastic infeed belt, belt width: (2x) 50 mm, plastic mesh belt, belt width: 620 mm, chain conveyor with dividers, belt width: 300 mm, distance between dividers: 180 mm and 230 mm, plastic electrically driven outfeed roller conveyor, roller width: 400 mm, total dimensions: 6200 mm x 2550 mm x 2400 mm. Used for 12 x 1 liter, 6 x 1 liter and 6 x 500 ml cartons.

Racupack case packer, type: Catamaran I, serial number: 1206398, year of construction: 2006, 400 V, 3 Ph, 50 Hz, 20 A, weight: 2000 kg, plastic infeed belt, belt width: (2x) 50 mm, Ues glue unit, type: 222086, plastic mesh belt, belt width: 620 mm, chain conveyor with dividers, belt width: 300 mm, distance between dividers: 180 mm and 230 mm, plastic electrically driven outfeed roller conveyor, roller width: 400 mm, total dimensions: 6200 mm x 2550 mm x 2400 mm. Used for 8 x 1.5 liter cartons.

Racupack case packer, type: CAT I, serial number: 0503298, year of construction: 2003, 400 V, 3 Ph, 50 Hz, 20 A, weight: 1800 kg, Meler glue unit, model: Micron+5, plastic infeed belt, belt width: (2x) 50 mm, plastic mesh belt, belt width: 620 mm, chain conveyor with dividers, belt width: 300 mm, distance between dividers: 180 mm and 230 mm, plastic electrically driven outfeed roller conveyor, roller width: 400 mm, total dimensions: 6200 mm x 2550 mm x 2400 mm. Used for 12 x 1 liter cartons.

Overview This complete filling line for single-use glass was delivered in 2019. Commissioning was stopped in Q1 2020, and resumed in Q4 2021. The line has been running 2/3 days per week since Q4 2021. The line can do 20 variations of bottles including 300ml, 330ml, 500ml, 568ml & 650ml. Components Depalletiser | Emmeti | MT565 | 2016 Siemens Simatic controls, Harford control panel. Bottle outfeed conveyor, plastic chain-link 1400 mm x 9.6 m with tapered outfeed on stainless steel supports. Krones Glideliner Accumulator with tapered outfeed, 850 mm to 350 mm wide Empty bottle inspector | Krones | Linatronic | 2003 60,000 bottles per hour Throughfeed stainless steel slat chain conveyor Height adjustable legs complete with dust canopy. Left to right orientation Filling block for glass | Krones |  2003 rebuilt 2018, installed 2019 Capacity: 50.000 bottles/h at 0,33 l long-neck glass bottle  ...

Hebrock Euro 2000 Edges up to 5mm striped fabric Granule Hot Melt Glue Basin heated inlet ruler Roller capping pneumatic 0.2 - 3 mm Saw capping rigid 90° - combi milling unit flush + radius Chassis Dimensions 2800 x 1400 x 1400 mm Weight approx. 550 kg Machine is currently still in use ex location NET € 3.200,00

Overview The disposable glass line was built in 2021 and has less than 1000 operating hours. The machine is currently set up for 150ml jars, but can be converted to 500ml. Technical data CONTAINER Container name: 150 g jar Container type: Yoghurt jar Volume [ml]: 150 Diameter [mm]: 60 Height [mm]: 85 PALETTE Container: 150g Pallet type: EURO pallet Pallet material: Wood Pallet dimensions (LxWxH): 1200 x 800 x 145 mm Transport direction: Lengthwise Number of layers: 18 Number of containers / layer: 27 Formation: 4x2x1 tray with cardboard lid (pack of 8) Machines Automatic depalletizer - KHS Innopal - AS 1N Year of construction 2005 Conveyor technology empty packs and empties inspection -Heuft Filling machine VMS KONTIFILL GLASSLINE 16/UC 10.000bph, ultra clean H2O2, 2 colored 3x A / 3x B, underlaid or stirred yoghurt Closure inspection - Heuft final view Full product X-ray - Heuft Examine ...

Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.

Description Complete multilayer Pex-Al-Pex pipes production line Main extruder Cincinnati Proton 45-30G Co-extruder Cincinnati CE-30 Cooling tank Cincinnati Sprayon 63T/5,8/3k Vacuum tank Cincinnati Vacon 63T/5,8/3k Haul-off Cincinnati Tracton 63/1C-6 Aluminum welder Leicht WIG-120 Aluminum unwinder AMT AH1,0/1700 Chiller HYFRA VWK30-1-S Aluminum pipe welder AIXCON PWU 400 Stockpile for raw aluminum, forming aluminum pipe, welding aluminum pipe UNIWEMA 30 KMW Generator for welder Huttinger BIG 40/100 Coating extrduer Cincinnati Proton 45-30G Glue co-extruder Cincinnati CE-30 Cooling tank Sider Jack Cooling tank Cincinnati Sprayon 63T/5,8/3k Haul-off Cincinnati RAE 63/1 X1 Marking machine IMAJE 9040 X ray gauge x SCITEQ X-ACT TWINEYE 40 Automatic winder FB Balzanelli TR1350 L1/8/M

Automatic line for the production of sandwich panels of the LL-2000 brand of the P-SYSTEMS plant (Czech Republic), 2003. The line is designed for the production of wall and roof sandwich panels with mineral wool and polystyrene foam insulation. The manufacturing process is automatic. Requirements for raw materials for sandwich panel sheathing - thickness 0.4 ... 0.6 mm .: - sheet steel galvanized The production process is carried out automatically (with the exception of the laying of insulation and the preparatory process). Completeness of the line, technical characteristics: - Unwinding device - 2 pcs. - Profiling area. - Table for supplying insulation. - Glue application and distribution device. - Steel strip heating section. - Pressing device. - Transverse movable cutting device. - Line control system. Line productivity per shift (8 hours) 1000 sq.m. The maximum spe ...

CNC assembly line Brand: Alberti Type: BMF new machine Equipment for automatic insertion of fittings, plinth parts, drawer runners and many more. Can be equipped with automatic screwing devices, gluing indications and press-in tools. Plant expandable with many possible hardware feeding stations. This Alberti line can be customized according to your specifications. Machine bed made of welded steel tube structure, the upper part is made of aluminum frame. Components of the line: - Feeding - Processing zone with transport rollers - destacking Work table: - Driven PVC rollers at the inlet. Usable length: 2500mm, usable width: 840mm - Reference table with PVC rollers Usable length: 2500mm, working height: 840mm, adjustable +/- 30mm - Driven PVC rollers at the outlet Usable length: 2500mm, usable width: 840mm - Vertical workpiece clamps, autom. adjusted to wor ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic  ...

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit Possible execution: - spindle drive: for one or two gluing units - bayonet adapter: for one or two gluing units

Single-sided edge banding machine Make: HOMAG Type: KAL 210 AMBITION 2264 Year of construction: 2014 One-sided edge banding machine for editing of straight workpiece edges and for gluing and post-processing in the longitudinal and transverse pass. Overview of aggregate equipment: - Separating agent spray unit - Joining milling unit - Gluing unit A20 with 2 rolls - end trimming unit HL84 - Pre-milling unit BF10 - Form milling unit FK11 manual - Profile scraper PN10 - Finishing unit Feed 18 - 25 m/min. Feed max. with FK11 20 m/min. Working height 950 mm Pneumatic connection 6 bar Total length 7845mm Workpiece thickness 8 - 60 mm Edge height max. = workpiece thickness + 4 mm Edge material roll 0.3 - 3 mm Edge material strips 0.4 - 20 mm Aggregate equipment: - Separating agent spray unit top/bottom - Joining milling unit 2 motors each 3 kW, 150 Hz ...

Size: 1850 mm Equipments: F/E/EE/EB/BE corrugated / solid cardboard Straight line glue 3 point / 4 point / special binding Working width min/max 215 mm / 1850 mm Insertion min / max 150 mm / 1200 mm Working width after gluing min / max 140 mm / 1000 mm Motorized format setting folding bottom

Fully automatic forming and erecting of NeoTOP partitioned carton fluted trays, NeoTOP open- top trays or NeoTOP cartons including integrated partition from flat blanks; cylindrical objects, applicators, tubes, medical devices or blisters are then laid in. The partitioned cartons, trays and packs are formed fully automatically from two supplied flat blanks. The partitions are formed and glued into the erected pack or onto the carrier blank. The products are then laid in by an automatic integrated inserter. An automatic product presence checker and leaflet inserter, barcode reading systems and a hot-melt unit for tamper-evident packaging complete the machine system. Output: up to 90 cartons / min. Inkl. sep. electr. panel.

Cheap LAGERCONTAINER 10 feet (3m) ideal as a material/storage container from location DE-83395 Freilassing Delivery at extra cost ! DESCRIPTION / SPECIFICATION Factory-new storage containers in robust and stable design. Welded steel frame made of wood and rolled profiles with corner fittings, stackable. The floor construction consists of steel beams with welded cross beams and a covering made of 28 mm thick, water-resistant glued plywood. The walls were made of a profile plate with a thickness of 1.5 mm and are welded to the frame construction. The roof skin consists of a 2.0 mm thick profile plate. Container doors are equipped with a double lip seal and rotary rod closures. Each container has anti-theft protection and forklift bags. TECHNICAL DATA / TECHNICAL DATA Dimensions outside: length x width x height: approx. 2,991 x 2,438 x 2,591mm Dimensions inside: length x wid ...

R25972/18 GUSCHKY spiral sleeve wap-around arrangement age: 1990 available: immediately wap-around machine manufacturer: Guschky technical details: region inside diameter 20-100mm region wall thickness 5mm Max. belt speed 50 m/min Motor speed ca. 10 kW voltage 220V Three phase system electricity 50 Hz Air pressure 6 bar -------------------- pneum. saw: manufacturer: Guschky age: 1990 technical details: region inside diameter 20-100 region wall thickness 4.5mm Sleeve length 400 – 6100 mm --------------------- Unwinder and Gluestation manufacturer: Gasser age: 1986 technical details: gluer dip coating Number paperweb 8 + 1 seperate cover web Available: sofort

manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort

R25532/08W Cosmos Vega folder gluer model: 145 age: 2003, full overhauled 2010 available: immediately for corrugated board Available: sofort

Technical data: - max. workpiece dimensions 300 x 250 mm- min./max. Distance from the saw belt to the conveyor belt 4 - 125 mm- wide conveyor belt 285 x 5470 mm wheel diameter 711 x 51 mm- min. workpiece length 200 mm- feed speed infinitely 0 - 25 m/min. (standard:15 m/min., optional: - Sawband dimension 4267 x 51 mm- drive motor 15.0 kW- Hydraulic motor 2.2 kW- motor Height adjustment 1.5 KW- voltage 400 V / 50 Hz- Suction nozzle 4 x 100 mm- cooling device- pneumatic Discontinuation roller in the inlet with shock absorber pneumatic pressure roller for precise sawing - the combination of thin saw band and precise sawband guide enables the production of extremely thin lamella thicknesses at min. slat thicknesses of 1.0 - 2.0 mm- smooth, glueable saw cut- saw band cutting joint from 1.2 - 1.6 mm (50% material saving) - Schmitt accuracy +/- 0.5 mm- PLC control with user-friendly touchscreen ...

R25591/08V KECK folder gluer model: SF 80 age: 1990 available: immediately work width: 800 mm pattern paste unit from stereotype plate lineal-cross gluing, punctual - strip gluing for 1 x lineal gluing, stereotype- gluing unit for cross gluing Still in operation: Yes Available: sofort