girondine used for sale

Manufacturer: Giradina, Type: Dualtech, Year: 2007, Control: Programm, Spraying heads - total: 4, Working width mm: 1350, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Einlaufband: yes, Feeding speed m/min: 2,5-7,5, Wight approx. kg: 6000, Year :2007

Used line for weighing, portioning, and packaging apples into polyethylene bags made by MAF-RODA and GIRO. The apple weighing, portioning, and packaging line consists of several components that, when assembled, form a single unit. Line components: 1. Water unloading tank. 2. Water unloading chute. 3. Fruit elevator from the water. 4. Inspection table. 5. Brush dryer. 6. Apple feed conveyor. 7. PDG series fruit weighing machine. 8. Plastic bag packaging head with label printer. 9. Rotary table. 10. Water circulation pump.

Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

bore capacity in steel (diameter): 50 mm arm length: 1100 mm bore capacity in cast iron: 60 mm quill stroke: 300 mm tool taper: MK 5 speeds: 22 - 1000 U/min feeds: ja mm/U Boring motor: 4,5 kw total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2,1 x 0,9 x 2,85 m Radial drilling machine - Box table 750 x 750 x 500 mm - Coolant system - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

A total of 7 ABUS single-girder overhead travelling cranes with a lifting capacity of 2,000 kg each are for sale. The cranes date from different years of construction and are equipped with ABUS electric wire rope hoists from the GM 820 series. Manufacturer: ABUS Crane Type: Single Girder Overhead Crane Load capacity: 2,000 kg Hoist: Electric wire rope hoist Wire rope hoist series: ABUS GM 820 Quantity: 7 pieces Years of manufacture: 1990, 1999 and 2000 Crane 1 Year of Make: 1990 Number: 851706-1 Cable: GM820F6 Crane 2 Year of Make: 1999 Number: 19/436098 Cable: GM820L06 Crane 3 Year of Make: 2000 Number: 19/447572 Cable: GM820L06 Crane 4 Year of Make: 1990 Ident Number: 851707-1 Cable: GM820F6 Crane 5 Year of Make: 1990 Ident Number: 851707-1 Cable: GM820F6 Crane 6 Year of Make: 1999 Number: 19/436099 Cable: GM820L06 Crane 7 Year of Make:  ...

For sale are a total of 6 ABUS double-girder overhead travelling cranes, each with a lifting capacity of 16,000 kg and a span of 16,155 mm. The cranes date from 1990, 1999 and 2000 and are equipped with ABUS electric wire rope hoists from the GM 6160 series. Manufacturer: ABUS Crane Type: Double Girder Overhead Crane Load capacity: 16,000 kg Wingspan: 16,155 mm Hoist: Electric wire rope hoist Wire rope hoist series: ABUS GM 6160 Wire rope hoist types: GM6160F6 and GM6160L06 Years of manufacture: 1990, 1999 and 2000 Location: Heilbronn Number of units available: 6 pieces The cranes were freshly serviced in 2026, and we are happy to offer help with the expansion.

H16 Timber beam formwork girder Height 16cm, Width 65mm, Weight 3,3kg/meter The tried-and-tested components for many peeling systems. Formwork girders are basic of many formwork systems and can be used individually. The carefully manufactured beams prove themselves thousands of times a day on many construction sites. The location is our warehouse in 5202 Neumarkt For further information or a viewing, I am always at your disposal. You can reach us at Tel.Nr.: +43 664 1296830 or by e-mail: officeberger-international.at Berger Construction Equipment GmbH

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Crane Serial Number: 111-005468 Load Capacity Main Hoist: 50,000 kg Auxiliary Hoist: 25,000 kg Crane Design: Double-girder bridge crane Hoist Class: HC3 Control: Radio remote control Overload protection available Load Indicator System LIS-SV Integrated load collective memory Hoist 1 Load Capacity: 50 t Type: GM6000.50000L Lifting Speed: 0.7 / 4 m/min Hook Path: 10,000 mm Hoist 2 Load Capacity: 25 t Type: GM6000.25000L Lifting Speed: 0.7 / 4 m/min Hook Path: 10,000 mm Trolleys Trolley Travel Speed: 5 / 20 m/min Trolley Track: 3,500 mm Electrical Data Operating Voltage: 400 V / 50 Hz Equipment Radio remote control Load display Overload cut-off Load collective memory Upper/lower limit switches Trolley travel limit switches Disc brakes Electric drive Fully documented Condition Regularly maintained Recurring safety inspection available I ...

Serial Number: 111-005455 Load Capacity Main Hoist: 32,000 kg Auxiliary Hoist: 16,000 kg Dimensions From the original ABUS drawing: Span: 17,270 mm Crane Runway Length: 20 m Lifting Height Main Trolley: 8,000 mm Lifting Height Auxiliary Trolley: 6,000 mm Trolley Track: 3,000 mm Equipment Double-girder bridge crane, radio remote control, load indicator system LIS-SV, load collective memory, overload protection, electric drives, hoist limit switches, trolley travel limit switches, disc brakes, IP55, 400 V / 50 Hz Hoist 1 Type GM7000.32000H Load Capacity 32 t Drive Group 2m / M5 - Hook Path 8,000 mm Hoist 2 Type GM5000.16000L Load Capacity 16 t Lifting Speed Drive Group 2m / M5 Hook Path 6,000 mm Condition Carl Stahl Safety Inspection available Inspection Result: In Order

Empac netting machine, type: GIRPLUS, serial number: 1614507, year of construction: 1999, 230/380 V, diameter pipe: 200 mm, film width: 90 mm, total dimensions: 2000 mm x 1050 mm x 2060 mm. Including crate with large amount of nets, dimensions crate: 1100 mm x 1000 mm x 1950 mm and pallet with parts.

18 transport pallets for concrete walls or similar and 1 pallet lifter

Screw conveyor with turnable outfeed shute, Diameter: 250 mm, Pitch: 190 mm, Infeed height: 1000 mm, Outfeed height: 2150 mm, Power: 3 x 400V, 50Hz, 15kW, Dimensions: 3800 x 1200 x 3200 mm

Projection: approx. 700 mm Table dimensions: approx. 780 x 655 mm Speed range: 125 - 710 rpm Internal reference: previously lot 51 Auction-ID: A7-49056-263

- Capacity 32 T . - Distance between supports approx. 17000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-2

- Capacity 10 T . - Distance between supports approx. 17000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-25

- Capacity 20 T . - Distance between supports approx. 18000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-21

Load capacity 16,000 kg, excluding rails Auction-ID: A7-49229-17

- Capacity 10 T . - Distance between supports approx. 18000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-12

- Capacity 16 T . - Distance between supports approx. 17000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-15

Needs to be checked, including battery charger. Can wrap up to 2m20 high Auction-ID: A3-46147-17725

Load capacity 8,000 kg, excluding rails Auction-ID: A7-49229-18

- Capacity 40/16 T . - Distance between supports approx. 18000 mm. - Side legs with a length of approx. 5100 mm to increase the usable height under hook. - Does not include rails or power line. - There is NO CE Certificate document. - ATTENTION! The delivery of this item will not be made until mid-January 2027. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-54

- Capacity 20 T . - Distance between supports approx. 17000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - ATTENTION! The delivery of this item will not be made until mid-January 2027. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-47

- Capacity 10/20 T . - Distance between supports approx. 18000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - ATTENTION! The delivery of this item will not be made until mid-January 2027. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-29

- Capacity 20 T . - Distance between supports approx. 17000 mm. - Does not include rails or power line. - There is NO CE Certificate document. - ATTENTION! The delivery of this item will not be made until mid-January 2027. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-37

Load capacity 8,000 kg, excluding rails Auction-ID: A7-49229-19

Radial drilling machine - Clamping cube 750 x 750 x 500mm - Coolant system - Emergency stop facility Drilling capacity in steel 50 mm Projection 1100 mm Quill stroke 300 mm Tool holder MK 5 Speeds: 22 - 1000 rpm Feeds yes Drilling motor 4.5 kw Total power requirement 7.0 kW Machine weight approx. 3200 kg Dimensions approx. 2.1 x 0.9 x 2.85 m Auction-ID: A7-49782-656

Key data: 3220 mm, 1550 mm

HARWI 1550 Giraffe Vertical Panel Saw Brand: Harwi Type: Giraffe 1550 Year: 1995 M-Nr: 5000 CK Max. cutting width: 1,550 mm Max. cutting length: 3,200 mm Max. cutting depth: 50 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 2.2 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Open back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 4.300 x 1.910 x 1.250 m Weight: 495 KG

Key data: 4300 mm, 1850 mm

HARWI 1850 Giraffe Vertical Panel Saw Brand: Harwi Type: 1850 Giraffe M-No.: 5008KM Year of Make: 2003 Max. cutting width: 1,850 mm Max. cutting length: 4,300 mm Max. cutting depth: 55 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 3.0 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Closed back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 5,200 x 1,300 x 2,700 mm Weight: 570 KG

Manufacturer: Giradina Lackersatzwalze 1300 shore 35, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1300, Approx. thickness of rubber coating in mm: ca 25,

Manufacturer: MINIPAN Model: CMBY 0400X000.06 GIROPN Year of Manufacture: 2011 Type of Machine: Soft dough biscuit forming machine • Power supply: 400V • Power consumption: 3.2 kW • Backlit LCD display with touchscreen • Rollers for soft dough • Fixed molds with wire cutter • Rotating molds: guillotine that opens when the dough is placed and then closes for precise dosing without dripping • Sheet size: width 400 mm, Length: min. 600 mm, max. 800 mm • Sheet types: 2 internally inclined edges, magazine for up to 20 sheets • Dimensions: Length = 2600 mm Width = 990 mm Height = 1400 mm Weight = 530 kg • Sugar dispenser at the machine outlet • DÜBOR TSA 800/10 plate lubricator (, 2012) with 5 spray nozzles Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU419T1316 Make3C France LocationBarneveld CEcheck TypeSKID Fondoir Mobile 150 Liters Girard Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume230 Ltr. Motor3 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity230 Ltr. (150 Ltr. net) Vessel sizesdia. 675x746 mm Dished bottomcheck Dished top sidecheck With covercheck Top connectionsDN76 OutletDN25 With jacket30 Ltr. Max. temperature140 °C With turbo stirrer(dia. 150 mm) Motor3 kW Speed mixing shaft1500 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.6158 Year of construction2000 Mounted on legscheck With switchas is Floorspace2,3x1,3 m Total height2,3 m Weight955 kg Extra Specificationswith:stirring vessel: 3C France, Tremie 15 Liters: Ø300x364 mm, 22 Ltr. (15 Ltr. net), vessel insulated, w ...

General SKU232T253 MakeAndritz Girapac TypeGPV2 1500 T3 No.14425 Year of construction2003 LocationBarneveld Main Features MaterialMild steel/Stainless steel Motor0.75 KW Surface5.6 m2 Specified Features - Rotating sieve Filter surface5.6m² Drum sizesDia: 600x1500 MotorDrum: 0,37 kW, Screw: 0,75 kW With knife dischargecheck Manual operatedcheck Rotating sieves Inletdia. 220 mm Specified Features - Rotating sieve MaterialMild steel, Stainless steel General Floorspace2,4x1,5 m Total height1,6 m Weight600 kg Extra Specificationscapacity: 135 m³/hinlet: Dia: 220 mmoutput: Dia: 145 mm&:nbsp:output screw: length 1850 mm, Dia: 145 mmRotating sievesConsumer wastePowdered foodsTea, herbs & coffeeStarchAgrochemicalsBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pha ...

General SKU425W1345 LocationBarneveld CEcheck MakePosimat Main Features MaterialStainless steel Motor14 KW Specified Features - Miscellaneous Capacity166 bottles/min Motor14 kW, 400 volt Capacity0,70-3 l. MaterialStainless steel General TypePosiflex-35-VA-Giramat-E Mach.No.11627.3.01 Year of construction2010 Floor space4,10x4,00 m Total height2,55 m Weight6000 kg Extra Specifications20-fold bottle unscrambler.Siemens toucscreen control, type Simatic panel,With vacuum conveyor.size conveyor 4000x1300mm.Sodeca fan, left side outputpossible bottle sizes 0,70-3 l.,&:nbsp:Sorting mono, pressure 6 bar,&:nbsp:MiscellaneousDairyOther feedPosimatMiscellaneous > MiscellaneousIndustries > Food & Feed > DairyIndustries > Food & Feed > Other feedBrand > Posimat What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

Mobile semi-automatic stretch film wrapping machine. Incl. integrated battery charger.

We offer formwork girders from Doka & Peri H20 and H24 inspected and sorted - ready for immediate use. Doka Beam I tec 20: Doka Rental Storage Quality - €6.50 per linear metre The I tec 20 composite formwork beam is a solid wall girder with a special structure in accordance with DIBt approval and innovative polyurethane final reinforcement for lower material use and extended service life. Doka Carrier H20 top P: Doka Rental Storage Quality - €6.00 per linear metre The resistant formwork beam in solid wall construction High-quality, robust, durable – the Doka H20 top P beam is a durable solid wall beam with a web made of a special flat pressed panel, which can be used in wall and slab formwork systems. The innovative polyurethane final reinforcement reduces damage and guarantees up to three times longer service life. GT 24 lattice girder: 5,00€ per linear metre Wel ...

1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm

Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement.

Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Wooden flooring line consisting of: Motorized loading roller conveyor Suction cup loader Sliding table saw/panel saw Multi-blade panel saw Tipper Dry or glue-fitted slats Stackers Packaging machines Parcel loader Packaging Automatic pallet unloading strapping machine Camera-guided movements The loading roller conveyor, the stack (max 50 sheets, thickness 8mm) is transported under the suction cup loader, where the panels are picked up and placed on the hopper of the panel saw. Model:TSA 360A The sectioned sheets go on a 90° sideshift and are conveyed by belts over a suction cup feeder. Here, by means of a camera, by means of the black line, they are centered and introduced into the Paul K34G multi-blade panel saw/multi-blade Paul The sectioned slats (n°10 size 130 size 1300x2x20202) go on a 90° sideshift that transports them to an octagonal tilte ...

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - .ucymachines/ Contact us at - sales@ucymachines