gear grinding used for sale

Qty. 1 Second-hand CI Flexo Printing Machine Brand & Model: Carint Geared/gearless: Geared Built: 2000 No. of colours: 6 colours (6+0) Material to print: PE, PP, OPP, PET, Paper Printing width: 1250 mm Material width: 1280 mm Print repeat: 360 mm – 1040 mm Mechanical speed: Up to 300 m/min Un-winder and winder: Un-winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Pumps: 6 x pcs, Pneumatic pumps Drying system: Electrical drying

This 3-axis Mazak Hyper Gear 510 was manufactured in 2005. It features an X-Y-Z axis stroke of 3070 × 1545 × 100 mm and a maximum workpiece size of 3050 × 1525 × 25 mm. With a rated laser output of 4000 W, this CO₂ laser cutting machine is designed for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Mazak Hyper Gear 510 machine we have for sale. Contact us for further details.

Unused gear wheel for a Westfalia MSA 200-01-076 skimming separator. Article number: 1166 3447 020. For a 50 Hz driven machine., Type of Machine: Gear Wheel, Drive line: 50 Hz, Condition: Never used

Unused small gear wheel for a Westfalia MSB 130-01-076 skimming separator. Article number: 3170 3423 010. German name: Schnecke. For a 50 Hz driven machine., Type of Machine: Small Gear Wheel, Drive line: 50 Hz, Condition: Never used

The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure Auction-ID: A7-45427-1

The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.

RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

MAKSYMALNA ŚREDNICA 320 MAKSYMALNY MODUŁ 6

MAX DIAMETER 320 MAX MODUL 8

MAX DIAM 400, MAX MODUL 8

Mägerle rack and pinion grinding machine grinding machine MFP-L Siemens CNC Manufacturer [manufacturer]: Mägerle Type [ type]: MFP-L-260-75 Control unit: Siemens 840D Sinumerik Incl. handwheel Year of construction[construction year]: 10/2008 Travel path: Clamping surface table X= 2202mm Clamping surface table Z=352mm Longitudinal stroke 2600mm Cross stroke of the grinding support: 650mm Distance between table and grinding spindle axis 806mm Grinding wheel dimensions: Diameter 400mm Width 160mm Bore 127mm peripheral speed grinding wheel: 35(50) m/s Lifting speed: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min smallest delivery amount 0,001mm Drive power: grinding wheel (AC) 75kW Total connection power: Machine 113kVA Knoll coolant filtering equipment dimensions ca: (L x D x H): 5.6m x 2.4m x 3m [weight]: 2.000kg Machine weight: 21.000kg Sp ...

Gear grinder REISHAUER OZA with change gears.

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

Generating Grinding Machine Grinding Machine Gleason Pfauter G320 CNC + Promot Automation Hersteller [manufacturer]: Gleason Pfauter G320 + with Promot Automation handling unit Type [ type]: G 320 Control unit: Siemens 840 Incl. control panel Baujahr[construction year]: 10/2001 Module [ ]: 0.5-7.0 Min. workpiece diameter [ ]: 10 mm Max. workpiece diameter [ ]: 380 mm Number of teeth [ ]: 10-600 Vertical carriage stroke "Z" [ ]: 200mm Horizontal carriage stroke "X" [ ]: 230mm Tangential carriage stroke (SHIFTING) "Y" [ ]: 135mm Swivel angle clamping head "A" [ ]: +-45° Tailstock tip stroke [ ]: 125mm tangential slide stroke – dressing [ ]: "V" 180mm radial carriage stroke – dressing [ ]: "U" 110mm Rotation speed – grinding wheel in progress [ ]: 3000rpm max - infinitely variable Egg speed - linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RP ...

CNC gear grinding machine/tooth flank grinding machine Höfler H4000 Built in 1990 CNC control is old + defective / needs to be replaced (needs retrofit) Wheel diameter - max. 4000 mm Wheel width 1560 mm Module - max. 32 Module - min. 3 Machine weight approx. 120 t Space requirements approx. m Year of Make: 1990 Wheel Ø max. 4,000 mm Module 3 - 32 Bevel angle max. 35 ° Wheel width with straight gearing 1,560 mm Stroke length approx. 1,600 mm Stroke rate 12 - 120 strokes/min. max. workpiece weight approx. 35,000 kg Max. number of teeth 12 - 768 Table size Ø x Bohrg. 1,900 x 750 mm Grinding wheel Ø approx. 500 mm Accessories / Special equipment: Hydrostatic guides in the grinding carriage, table and in all other Guideways Complete sanding chamber encapsulation with sliding doors automatic grinding sequence in several cycles as well as settings for ...

Key data: 360 mm

Reishauer Model RZ362A CNC Gear Grinder Maximum Wheel Diameter: 14.17” Maximum Module: 0.275” Minimum Module: 0.0039” Slide Stroke: 6.88” Maximum Helix Angle: ± 45° Maximum Number of Teeth: 600 Minimum Number of Teeth: 6 Maximum Workpiece Weight: 132 lbs. Grinding Wheel Width: 4.09” Grinding Wheel Diameter: 11.02” – 13.77” Speed of Grinding Worm when Grinding: 1100 – 2330 U/min Speed of Grinding Worm when Profiling: 50 – 95 U/min Feed per Revolution of Workpiece: 0 – 0.133” Grinding Worm Infeed Speed: Up to 99.9mm/min / 3.93 IPM Approximate Weight: 14,553 lbs. EQUIPPED WITH: Reishauer CNC Controls. Dittel MBA2000 Balancing Controller. Elbaron R12D Mist Collector. Kato Motor Generator. Freestanding Hydraulic Unit. Hydraulic Oil Pump-Sump System. Free Standing Electrical Control Cabinet. Tailstock. (2) Wheel Hubs. Manuals and Drawin ...

Key data: 1000 mm, 25

Hofler Rapid 900 CNC form wheel gear grinder Year: 2003 installed 2004 This universal CNC form wheel gear grinder is a great job shop machine it can be inspected in plant under power . Machine is equipped complete with all necessary items to run this machine in your facility Machine specifications Max tip diameter of workpiece 1000 mm Max root diameter 50 mm stroke length 650 mm max workpiece height under tailstock 1960 mm profile height 41 mm Module 1-25 mm Helix angle +/- 45 deg Max grinding wheel diameter 400 mm Min wheel diameter 200 mm grinding wheel width 60 mm grinding spindle motor 13.5 Kw Grinding spindle speed range 1- 4000 RPM Dressing roll diameter 160 mm dressing roll spindle speed range 1-540 ...

max. wheel diameter: 1500 mm gear width: 550 mm max. module: 25 min. module: 2 workpiece weight max.: 6000 kg max. number of teeth: 432 min. number of teeth: 12 table diameter: 990 mm grinding wheel size: 400 mm total power requirement: 75 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: m With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reishauer RZ 362A Built in 1999 Accessories: 2x Fässler dressing device Diamond Wheels Whetstones Turbo separator

Gear grinding machine ZSTZ 630C1 with change gears.

max. wheel diameter: 1010 mm gear width: 0 mm max. module: min. module: total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radiu ...

max. wheel diameter: 330 mm gear width: 180 mm max. module: 7 min. module: 0,5 total power requirement: 12 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

Key data: 4000 mm, 1560 mm, 32

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.

max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN

total power requirement:36 kW Available from approximately week 15 of 2026 A well-maintained gear grinding machine including: Automation Promot, year of manufacture 2012 Filtration system Hoffmann YOM 2012

max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5

max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5

Key data: 3500 mm, 20

HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...

max. wheel diameter: 762 mm gear width: 116,84 mm max. module: min. module: total power requirement: 145 kW weight of the machine ca.: 27 t dimensions of the machine ca.: 5,5 x 5,3 x 3,4 m With the GLEASON Phoenix® 800HG bevel gear grinding machine, manufacturers of spiral, hypoid, and other bevel gears for large components can significantly increase their productivity. The machine enables faster grinding processes while maintaining the highest accuracy and excellent repeatability. Its extremely robust machine design forms the basis for stable machining processes, even for large workpiece diameters of up to 762 mm. Combined with a powerful FANUC CNC control system, the 800HG offers maximum flexibility for a wide range of gear geometries—from spiral and hypoid bevel gears to special forms. Thanks to its well-thought-out machine concept, the Phoenix® 800HG allows for reduced setup ti ...

max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 °

max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm

max. module:7 weight of the machine ca.:5 t worm grinding diameter:280-350 mm width of grinding worm:84-104 mm min. number of teeth:6 max. number of teeth:600 max. top circle diameter:360 mm max. workpiece weight:60 kg without filter

max. wheel diameter:180 mm max. module:5 min. module:1 weight of the machine ca.:14 t dimensions of the machine ca.:4,5 x 2,84 x 2,8 m min. number of teeth:7 toolpiece turning speed range:4000-10000 U/min tool length:210 mm With tail stock No dressing device Only CBN

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service