galler used for sale

This TRUMPF TruLaser Tube 7000 Tube Laser Cutting Machine was manufactured in the year 2010 in Germany. It is equipped with a 3.6 kW TruFlow CO2 Laser. Check photo and video gallery for further details. Contact us anytime for more questions!

This BYSTRONIC BySmart Fiber 3015 6KW Laser Cutting Machine was manufactured in 2019. It is like new with only 6387h of operation. The cutting head was replaced with a new SSC V2.2 HLC8 (last model) end of 2023. In addition 2 modules were replaced. In total € 80.000 invested. The fiber laser has a laser power of 6kW. In production the machine can run with a sheet size of x = 3000mm and y = 1500 mm. See photo and video gallery for more impressions. Original tech specs sheet as PDF attached below.

This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!

This ARBURG Allrounder 420 C 1000 - 290 Golden Edition Injection moulding machine was manufactured in 2022 in Germany. It is equipped with a Servo-controlled injection unit which has clear distance between tie bars of 420mm. This injection moulding machine has a clamping force of 1000 kN and features a plasticizing cylinder set of 30 mm screw diameter (without nozzle) in wear-resistant design for processing thermoplastics with corrosive and/or abrasive components, with a low to medium filler content of glass, talc orTiO2. It is included an ARBURG THERMOLIFT 100-3 and Temperature control unit (HB-Therm Thermo-5 HB-140Z1). In total is has operated 619h automatic, 891h pump and 81567 machine cycles. See shot weight specifications per material, nozzle and cylinder temperature guide values in photo gallery.

This Krauss-Maffei 150-700 C2 Injection moulding machine was manufactured in the year 2003 in Germany. It is equipped with a clamping force of 1500 kN, a SP 700 injection unit with a screw diameter of 50 mm. Shot weight for PS is at 343g. See video gallery for more impressions. The injection moulding machine has 76901 cycle hours and 90924 machine on hours.

This Krauss Maffei 1300/14700 MC Injection moulding machine was manufactured in the year 1998. It is equipped with a Siemens S7 control unit. The machine has a clamping force of 13000 kN and a screw diameter of 130 mm. See photo and video gallery for more details.

This Stratasys Objet500 Connex3 3D Printer was made in the year 2018 in Israel. Three materials can be printed at the same time, i.e. colored models are possible, hard/soft material combinations are possible, and transparent components can be printed. The high pressure cleaning system is included. Very low hours, only around 1600h. See tech specs PDF (English) and noozle test PDF attached for more details. Check out the video gallery to see the 3D Printer in action.

This HURCO VMX 64/50T (2001) Machining centers (vertical) machine was manufactured in 2001 in Germany. It is equipped with a Ultimax 4 unit and has 3 axis (X = 1625 mm / Y = 860 mm / Z = 760 mm). The machine has a spindle speed of 6,000 rpm, a SK50 tool holder and a clamping surface of 1675 x 890 mm. In addition it comes with a Pocket milling with islands, Synchronised thread cutting, Ultinet and Ultipro II. See photo and video gallery for more details.

FOLCIERI GRANULATOR, 1.000 mm wide rotor, 350 mm Ø, 90 kw drive, 5 rotating knives, complete with extraction vent, (Possible supply of loading conveyor belt and bag supporting frame), electric panel, Offered totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), installed power : 90

Ingredient Cart/Table with 6 ingredient trays Stainless steel with 4 swivel castors External dimensions approx.: 1300x600x1000 mm, WxDxH Stainless steel plate top with 3-sides gallery Used appliance cleaned We have a large selection of high-end furniture!