ga 355 used for sale

Key data: 5760 KW, 3450 V

Niigata Natural Gas Generators 2 × 2,880 kW / 60 Hz Two well-maintained natural gas generator sets manufactured by Niigata in 2005, each with an electrical output of 2,880 kW at 60 Hz. The plant was operated until 2020 and maintained in accordance with Niigata’s maintenance procedures. The most recent scheduled 30,000-hour major maintenance for both engines was completed in April 2019. At the time of shutdown, the total accumulated operating hours were approximately 31,000. The plant was professionally dismantled in 2022. The scope of supply includes the plant control system, all mechanical and electrical indoor auxiliaries, high-voltage circuit breakers, and motor control center (MCC) cabinets. Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets  ...

For Sale – Jenbacher JGS 320 gas Natural Containerized Gas Generator Set Model: Jenbacher JGS 320 Configuration: Containerized unit Year: 2013 Operating Hours: 65,000 h Major Maintenance: Last major maintenance performed at 34,000 operating hours Maintenance History: Regularly maintained under supplier preventive and corrective maintenance contract Heat Recovery: Includes 451 kWt steam-generating heat exchanger Output Voltage: 400 V Transformer: Not included Control System: dia.Ne XT3 supervisor version

Machine Overview The labeling machine Cavagnino&Gatti is a rotary labelling machine manufactured by CAVAGNINO & GATTI in 2002. It features a 14-plate carousel with counterclockwise rotation and is equipped with a mixed technology configuration: three pressure-sensitive (self-adhesive) labelling stations and one cold-glue station. The machine is designed to apply front and back body labels in a single pass, with an additional station dedicated to a bottom label approximately 2 × 6 cm. This architecture enables flexible set-ups, from adhesive-only operation to hybrid cycles where a cold-glue label (e.g., tax strip or wrap component) is combined with pressure-sensitive labels. The 14 rotating bottle plates provide stable container handling for consistent label placement. Typical applications include glass or PET containers across beverages and specialty foods, as permitted by the install ...

Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T The Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T is a shrinkable capsuling machine designed to optimize high-performance bottling lines. In fact, this model delivers an advanced technical solution, providing precise and reliable application of PVC shrinkable capsules on bottles of various sizes and types. This machine handles bottle formats with diameters ranging from Ø55 to 120 mm and heights from 220 to 360 mm. Main Technical Features Manufacturers produced the machine, model Monostadio Z9T, in 2007. It features a rotary multi-bell distributor with 9 heating heads. Consequently, this configuration ensures uniform heat distribution, which allows the capsules to shrink evenly and adhere perfectly to the bottle neck. Moreover, the multi-bell system optimizes capsule handling, minimizes downtime ...

Used Capsuling Machine Robino and Galandrino up to 15000 bph In the bottling field, efficiency and precision are paramount. They ensure maximum productivity and uphold high-quality standards. Consequently, the used Robino and Galandrino capsule machinery emerges as a technologically advanced solution. Specifically designed to meet particular needs, it boasts a capacity of up to 15000 bph. This article meticulously explores the machine’s technical characteristics and specifications. Furthermore, it highlights how it can significantly optimize bottling processes. PVC Capsule Distributor of the Used Capsuling Machine Robino and Galandrino up to 15000 bph The PVC capsule distributor, ingeniously designed for continuous feeding, guarantees an even distribution of capsules on bottles. This essential component steadfastly maintains a steady production flow. Moreover, it ensures each bottle ...

Used Capsuling Machine Robino e Galandrino up to 2800 bph Linear Distributor Laminator with Single Head by Robino and Galandrino Certainly every component plays a crucial role, In the intricate world of bottling. Indeed among these, the linear distributor laminator with a single head by Robino and Galandrino stands out as a pivotal cog in the machinery of production. Inclined Tray Capsule Warehouse In facts at the heart of this machine lies its inclined tray capsule warehouse. This ingenious design ensures the smooth and efficient distribution of various types of capsules, in addition those made of PVC, polylaminate, and moreover those used for sealing sparkling beverages. Suitable for PVC, Polylaminate, and Sparkling Capsules Distribution Versatility is definitely the hallmark of this machine. It is unquestionably tailored to handle the distribution of PVC, polylaminate, and sparkling w ...

Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph The Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph, model Rekord 14000 TC, provides an advanced technical solution for applying and fastening 4-wire cages on bottles of sparkling wine. Moreover, this machine ensures high productivity and precision, making it particularly suitable for high-volume bottling lines. Technical Features The wirehooder features an automated rotary system that handles up to 14,000 bottles per hour (bph). Consequently, this high-speed capability optimizes production lines, maintaining a steady flow of bottles and minimizing downtime. Robino & Galandrino, a leader in bottling machinery, designed and manufactured this model in 2015, ensuring it delivers reliability and durability for intensive use. Additionally, the rotary system guarantees uniformity and reduces operational ...

Used Capsuling Machine ROBINO GALANDRINO up to 15000 bph Introduction The machine provides a highly efficient solution for the bottling process. Specifically, it is suitable for operations requiring a machine with a production capacity of up to 15,000 bottles per hour (bph). This specific model, in particular, applies heat-shrink capsules, ensuring a secure and uniform closure on a wide range of bottles. Technical Specifications The MONOSTADIO Z T8 model, for instance, features 8 thermal heads, allowing it to operate at speeds of up to 15,000 bph. Consequently, the machine moves bottles from left to right, which is crucial for integrating it with other line equipment. Safety and Protections The machine, therefore, prioritizes operational safety with guards installed along its entire perimeter. Consequently, these safety guards minimize the risk of accidents during operation and ensure a  ...

Technical Specifications & Performance Data The Used Wirehooder Robino and Galandrino 8 T 2012 is a high-efficiency rotary wire-hooding machine designed for continuous operation in a used bottling line for beverage production. Built on the proven Record 8 platform, it offers robust performance for glass bottles closed with corks and secured by wirehoods (muselets). With eight heads, anticlockwise rotation, and a high-capacity wire dispenser, it sustains demanding industrial packaging cycles while minimizing stops. Manufacturer: Robino & Galandrino Model: Record 8 Year of construction: 2012 Application: Automatic wirehood (muselet) application on corked glass bottles No. of heads: 8 (rotary) Rotation direction: Anticlockwise Production speed: Up to 8,000 bph (format dependent) Format readiness: Equipment included for 2 bottle formats; variable head height for rapid set-up High-capacity di ...

Technical Specifications & Performance Data The Robino & Galandrino MONOSTADIO ZT9 is a high-throughput capsuling machine engineered for continuous operation in beverage production environments. Purpose-built for glass wine and spirits applications, it delivers consistent capsule application at line speeds suitable for modern used bottling line configurations. Manufacturer: Robino & Galandrino Model: MONOSTADIO ZT9 Year of manufacture: 1994 Application: PVC capsule application on glass bottles Nominal production speed: up to 15,000 bottles/hour No. of working heads: 9 (continuous-motion carousel) Bottle format supported: 0.75 L Container compatibility: Glass (integration-ready with lines handling PET or aluminum containers upstream/downstream) Capsule magazine: Single stock position Safety: Protective guards and interlocks included Documentation: Manuals available Detailed dimensions, we ...

Technical Specifications & Performance Data The Used Capsuling Machine Robino & Galandrino MONOSTADIO FT6 is a high-precision rotary capsuler designed for PVC capsule application on sparkling wine formats. Engineered for reliable operation in demanding beverage production environments, this second hand unit combines throughput with precise capsule placement for professional finishes on glass bottles. Manufacturer / Model: Robino & Galandrino MONOSTADIO FT6 Year of manufacture: 2010 Machine category: Capsuling machine (PVC capsules) Production speed: up to 7,000 bottles/hour (format-dependent) No. of heads: 6-head rotary carousel for continuous operation Container type: Glass bottles Bottle format: 0.75 L (typical sparkling wine “Spumante” format) Product type focus: Spumante and sparkling-style wine applications Safety: Safety features included (guarding and interlocked access) ...

Technical Specifications & Performance Data The Robino & Galandrino Vulcan Transfert is a robust, second hand capsuling solution designed for reliable operation within a used bottling line. Built in 1996 and currently in production, it is engineered for high-quality application of PVC and polylaminate capsules on primarily glass bottles, typical in wine and spirits beverage production. Manufacturer / Model: Robino & Galandrino Vulcan Transfert Category: Capsuling machine (automatic) Year of manufacture: 1996 (CE compliant) No. of heads: 4 (2 thermal shrink heads + 2 snare heads) Rated speed: up to 2,500 bph with polylaminate; up to 4,000 bph with PVC (application-dependent) Capsule types: PVC shrink capsules and polylaminate capsules Capsule magazine: Tray-style magazine for consistent feed Bottle infeed orientation: Entry from the left Frame & guarding: Fully enclosed stainless steel ba ...

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

Gaulin 2 stage MicroGap homogenising valve. very good condition.

Gaulin Microgap Homogenisierventil, mit 2te Stufe. Sehr guten Zustand.

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

Scrubbing machine Gansow 51 BF 70 Manufacturer: IPC Gansow Dealer: reiko GmbH Model: 51 BF 70 Machine number: 52 0223 081 Rated voltage: 24 volt Year of construction: 1991 Scrubbing machine with battery charger! Machine is no longer fully operational, can be fixed with little effort or used for spare parts. New price: approx. 8,000

The quasar 2,5 kN is a product with the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typical obtained from static universal testing machines tensile, pressure and bending - cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configu ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

Do not buy a used tractor tester 100 kN or smaller: In almost all cases, the electronics for WIN 7 or 10 need to be completely modernized. For the purchase of the used universal testing machines, pick-up, refurbishment and their retrofit, you will receive a new machine (!) from GALDABINI from us Quasar 10 kN latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine constructed using finite elements FEM Available load cells: 10 N | 20 N | 50 N | 100 N | 250 N | 500 N | 1 kN | 2.5 kN | 5 kN | 10 kN for tests on plastics, rubber, foils, textiles, components, assemblies and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, future-oriented design Extreme signal resol ...

Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

for manual cutting of punched oil carton stencils, with autom. Cardboard feed, font size 7/8inch = 22 mm with the letters of the alphabet, numbers and all common Punctuation.

QUASAR 1200 kN tractor / universal testing machine This is the replacement for an outdated, uneconomical hydraulic tractor testing machine / universal testing machine. Concerns when purchasing a used (hydraulic) universal test machine that will almost certainly be modernized with new electronics for WIN 7 or 10. In addition, used machines often have other (hidden) defects, such as a knocked-out central spindle of the lower clamping head. Quasar 1200 kN with the latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine designed by finite elements FEM for tests on steel, reinforced steel, screws, wire ropes and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, fut ...

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

Grass collecting container GAH 3060/2 fits Kubota front mower F3060 / F3560. Without turbine!

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled

Gabelkopf H20, verzinkt, Neu Ausführung mit 4 Winkelprofilen und Rohransatz mit Langloch, passend in alle DIN oder Euro Norm Gewicht 3,20 kg

Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ...

Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ext ...

Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new

Neri/Marchesini/Garvens/Multipack labelling & packing line for round plastic bottles consisting of: Bottle infeed table, Neri SL 400 self-adhesive labelling machine for bottles, etc., suitable for containers with a diameter from 15 to 80 mm, label height from 10 to 120 mm, conveyor width 80 mm, capacity up to 220 bottles per minute, bottle outfeed table used as a buffer, Cognex camera inspection of the print of the variable data (batch no., expiry date, etc.) on the labels, Marchesini MA155 horizontal cartoner, continuous motion, carton size range: A: 25 – 100 mm, B: 15 – 85 mm, H: 65 – 190 mm, capacity up to 140 cartons per minute, GUK leaflet folder from stack, bar code reader for leaflet, carton and presence of leaflet in the carton, Garvens S2 inline checkweigher with reject device and reject container, weighing range up to 300g, Multipack F40 collator & stretch bander for car ...

Built in 1997 Pile height 400 mm section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Speed max 60.000 Ex./h Weight 980 kg (approx.) ; working condition

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

7000 depth bars galvanized for pallet racks with a depth of min. 105 cm Second-hand goods, see pictures Outside – Outside 1047 mm Support 25 mm Negotiating price: € 5,-- net per piece from stock Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing is possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas broom-clean company clearances Closures Fast, flexible, quick-witted! We also clear and/or dispose of liquidators. Write  ...