ga 355 used for sale

ndustrie replacement monitor 12.1 TFT monitor Matching for lid machines with dialog 11 control High quality anti reflective glass Technical data: TFT-LCD Monitor 12.1 inch display/exposure 800 x 600 pixels brightness 40 0 cd/m2 Contrast ratio 500:1 response time 8 ms frequency 60 hz display range 246 x 185 mm External power supply 12V operating power system -10c +60c power consumption max. 30 W connection D-Sub 9pol. 2 consecutive OSD control Brightness, contrast adjustment, auto adjustment phase position, clock, voice installation, reset accessory: cable, power supply 24 months warranty! More monitors, new and used on request!; New

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

lister machine Marchesini MB 440 for PVC - ALU from 1994. Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994 Continuous movement machine Automatic blister feeding Check weigher Garvens S2

As good as new hand groove device / creasing device, working width 355mm

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

cutting diameter: 355 mm dimensions of saw-band: 3770 x 34 x 1,1 mm cutting speed: 20 - 80 m/min cutting width: 490 x 280 mm : 290 mm Impact energy: 250 mm : 230 mm : 180 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions: 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...

SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 620-1040 mm adjustable -Roll width: 355 mm -Dimensions: 480/480/H620 mm -Weight: 16 kg

Converter, converter, converter, drive converter, controller, inverter -SEW: Movitron Type 355 825074X -Input: E 380-415 V 50 (60) Hz -Output: G 0 ... 460 V 55 A -Temperature: 0-45 °C -Protection class: IP00 -Dimensions: 335/220/H175 mm -Weight: 7.2 kg

Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Jaws and threaded rods: missing -Chuck size: Ø 355 mm -Weight: 15 kg

Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed -Guide track: from Meuselwitz lathe -Measures: see drawing in the photos -Dimensions: 780/355 / H390 mm -Weight: 135 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 355 mm -Admission thread pitch: 4 mm -Rezess: Ø 70 mm -Weight: 35 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: O 355 mm -Short taper: size 8 (139.7 mm) -Number: 1x discs available -Price per piece -Dimensions: O 355 / H175 mm -Weight: 38 kg

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

transformer -Type: EE 355 -Primary: 380 V -Secondary: 220 V 1.45 A/21 - 24 V 1.5 A -Dimensions: 120/100/H130 mm -Weight: 5.3 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 355 mm -Internal thread diameter: 69 mm -Weight: 24 kg

Clamping angle for workpiece clamping -Dimensions: W/H/L 355/345/550 mm -Thickness: 33 mm -Long hole: 34 x 350 mm -Surface: milled -Weight: 74 kg

Transmission Manufacturer: Rossi Model: R2E 355 FC2S The gearbox is NEW and fully functional. see pictures for more details.

Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: AL A6VM 355 HD2D / 63W 2-VZH157D B-S0167 Condition : New

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, screw stand -Support stand: Steel stand, height adjustable -Design: solid steel construction -Dimensions: 355/280H500 mm -Weight: 19 kg

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: IVO, incremental encoder -Type: GI 355.060C215 -Voltage: 10-30V -Shaft: Ø 10 x 20 mm -Quantity: 1x encoder available -Dimension: Ø 58/ 92 mm -Weight: 0.2 kg

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm -Roll: Ø 52 x 355 mm -Dimensions: 500/420/H570 mm -Weight: 14 kg

Stop square, locksmith square, control square -Angle stop: Leg length 355 x 250 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 400/250/H25 mm -Weight: 2.7 kg/pc.

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Manufacturer: Rippert, Type: N-355 B, Year: 1995, Diameter intake mm: 355, Engine power kW: 3, Flow rate approx. m3/h: 3000-6000, rotations rpm: 1415, Direkt drive: yes, Pressing: 1080, Wight approx. kg: 200, Required space L x W x H mm: 1000 x1000, Year :1995

Tool diameter: mm sanding disc diameter: mm Motor output: 5 kW total power requirement: kw Weight: 1.500 kg Overall size: mm Control: cnc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

Offer 26004 Technical data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 1800 kg - with: - Control ELUMATEC E 355 - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - separate control cabinet, - Cycle spraying device

Flat conveyor belt on aluminium substructure Length of the strap 355 cm, width of the strap 60 cm With the regulation of the amount Conveyor belt mobile, on wheels

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan -Manufacturer: Alko-Therm, centrifugal fan type RZR 11-355 -Motor: Siemens 0.9/3 kW -Speed: 980/1450 rpm -Connection input: Ø 300 mm -Connection output: 460 x 300 mm -Dimensions: 1200/640/H670 mm -Weight: 89 kg

Rotary union, rotary union, rotary distributor, rotor-borne rotary union -Condition: the rotary union is unused -Design: Brass housing and stainless steel rotor -External thread: 1 inch left -Internal thread: 1 inch -Passage: Ø 22 mm -Number: 2x rotary unions available -Price: piece -Dimensions: 83/83/H160 mm -Weight: 3 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table -Model: AWH 355 -can be opened on one side -without hydraulic unit -with hydraulic valves -without control -controlled via cam switches -supported by clamping brackets for heavy machining -Clamping surface: Ø 350 mm -Peak height: 350 mm -braked: hydraulically -driven: hydraulically -Hydraulic motor speed: 10-1500 rpm -Swallowing volume: 20 cm³/rev -Dimensions: 680/360/H620 mm -Empty weight: 290 kg

Buchi K-355 Kjeldahl Distillation Unit Power consumption: 2200 W. Weight: 17 kg Dimensions (D) x (H) x (W): 400 x 360 x 660 mm Display distillation time, steam power Steam power 30 – 100% adjustable NaOH acid resistant pump Measurement range (nitrogen to be analyzed): -0.1 – 200 mg N Equipment tested With accessories and glassware (see photos) Year of manufacture: 2017 In excellent condition

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149

Brand: MARELLI GENERATORS, Condition: NEW, Generator KVA: 3550 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 5124 , , https://www.hamofa.com/stock/generators/marelli-generators-mjb630-la4b 24-3550kva-new/151, , = More information =, , Type number: MJB630 LA4B24 LOSSE GEN 3550KVA

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -Net weight: 7 kg -Quantity: 1 package available -Total weight: 7.6 kg

Saw blade, wood saw blade, circular saw blade -Ø 355x4.3/3.2x30 -Z72 = T 15.49 -n max. 5500 -0904-1041782x HW -UFN- equipped -Price: per piece -Number: 1x available -Weight: 2.6 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 355x3.8/3.0 -Z72 = T 15.49 -n max. 5500 -0798-98541264x -UFN- equipped -Price: per piece -Number: 2x available -Weight: 2.6 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 355x4.4/3.2x30 -Z72 = T 15.49 -n max. 5500 -1003-1032858x HW -UFN- equipped -Price: per piece -Number: 12x available -Weight: 2.6 kg/piece