freezing room used for sale

Standard descriptionPROOFING ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying of the

Used complete steam boiler room from Viessmann. It consists of two steam boilers from Viessmann Vitomax 200-HS type M75A231. Year of manufacture 2015. CE The capacity of each boiler is 5.53 Tons of steam/h. Operating pressure 13 bar. CE

The real estate compendium consists of two distinct cadastral units: Housing unit (cat. A/4), of about 100 m², located on the first floor, consisting of kitchen, bathroom and three bedrooms. Ancillary room/cellar (cat. C/2), located on the ground floor, of about 50 m², with an internal height of 4.00 m and direct access from Via Mazzini. The surfaces were taken from the cadastral plans. State of conservation: The warehouse is free, in its raw state, with a load-bearing masonry structure and without systems. The apartment is free and is in good general condition; It was renovated about 35 years ago and has no obvious deterioration of the structure. It is equipped with water, electricity and gas systems, as well as a recently installed natural gas boiler. Cadastral data: Land Registry of Buildings – Sheet 113, Particle 379: Sub. 1, cat. C/2, class 2, consistency 48 m²,  ...

Break room furniture, table, 3 chairs, shelf, boltless shelf, household refrigerator, all older

Changing room partition walls plastic grey/ frame anthracite, for women and men, 2 wheelchair-accessible changing rooms, 3 single cabins, 1 collective changing room, electric lockers with transponder cards, 4 changing benches, 2 electric hair dryers STARMIX, transponders were not found, service transponders available

Storage room built from metal sales shelves Tegometall approx. 500x200x300m (L x W x H), color white on the outside, front side with door, inside sales shelves gray, various shelves, used as storage

Cold room VIESSMANN approx. 395x300 cm, external cooling, without cooling unit

New unused modern outdoor room, equipped with electricity, desk, laminate flooring, insulation, lock on door, LED lighting,... Auction-ID: A3-43535-6010

Dimensions: 2 x ( 52x120x185). Auction-ID: A1-46768-7

76 pieces Oak Composite Slats / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40113-156

76 pieces Teak Composite Blinds / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40113-157

76 pieces Black Composite Slats / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40113-158

Size: W 4.20 x D 3.10 x H 2.40 m - With entrance door - With Manerup refrigeration unit

Approximately 25m2 per room; Equipped with insulated doors (360x500cm) and ceiling, control box, radiators, central heating boiler, humidification system Auction-ID: A1-44305-31

Consisting of 2 cabins; equipped with \"Vapac\" Microvap humidifier; fans; control box; heating unit; insulated panels and door; Total size approx. 515x182x216 cm Auction-ID: A1-44305-32

Used UHT Milk Preparation Room Tetra Pak 6600 L/h Technical Overview of the System The Used UHT Milk Preparation Room Tetra Pak 6600 L/h provides a complete solution for the aseptic preparation of UHT milk, drinking yoghurt, juices, and flavored beverages. Currently in storage and ready for reinstallation, the system delivers high thermal and microbiological efficiency. Moreover, its modular design allows it to operate at 2640 L/h, 3850 L/h, and up to 6600 L/h in full configuration. Therefore, it adapts well to varying production demands. Homogenization Section At the core of the Used UHT Milk Preparation Room Tetra Pak 6600 L/h lies a Tetra Pak homogenizer, model Tetra Alex, which ensures effective fat globule size reduction and consistent product texture. As a result, it stabilizes complex emulsions such as flavored milk or drinking yoghurt and prevents phase separation during storage. ...

Used UHT Milk Preparation Room Tetra Pak 4000 L-h Operating Capacity and Product Versatility The Used UHT Milk Preparation Room Tetra Pak 4000 L-h delivers optimized aseptic thermal processing for dairy and beverage applications. Specifically, the unit operates at variable flow rates from 2000 to 4000 liters per hour, making it suitable for plain milk, flavored milk, drinking yoghurt, and condensed milk. Furthermore, with program adjustments, the same line also processes fruit juices, nectars, and soft drinks. As a result, this flexibility makes it ideal for multi-product operations. The plant currently remains in storage, and as such, is ready for relocation and installation in a new production facility. In-Line Aseptic Homogenization The Used UHT Milk Preparation Room Tetra Pak 4000 L-h includes an aseptic homogenizer manufactured by Tetra Pak, model Tetra Alex, year 2006. In particula ...

10 pieces Dekolight Linear 100 Article 707016 See data 4000K - without rails, without connectors - - Figure shows assembly example - Auction-ID: A1-47205-360

x-travel:600 mm y-travel:450 mm z-travel:400 mm Table area:700 x 480 mm spindle turning speed range:10 - 3150 U/min spindle taper ISO:40 quill stroke:80 mm dimensions of the machine ca.:1,8 x 2,1 x 1,9 m total power requirement:8 kW weight of the machine ca.:3,5 t Machine with universal turn, sviwel and tilting table - CNC control DIALOG II - splash guards - misc. parts

x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:710 x 410 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 B table load:180 kg no. of flutes:8 groove width:14/25 mm tool taper:SK 40 speeds::20 - 3000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Year:ca. 1984 Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:400 x 710 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 table load:180 kg no. of flutes:8 groove width:14/45 mm tool taper:ISA 40 speeds::20 - 3000 /28- 4000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Documents:inkl. Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

total power requirement:2,4 kW weight of the machine ca.:1150 kg dimensions of the machine ca.:1550 x 1615 x 1630 mm table clamping surface LxW:315 x 710 mm max. tool weight:200 kg T - slots distance:63 mm T - slots - width:12 mm taper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/min feed speeds:11,2 -355 mm/min Documents:vorhanden

x-travel:600 mm y-travel:400 mm z-travel:380 mm total power requirement:6 kW weight of the machine ca.:1700 t dimensions of the machine ca.:1800 x 2130 x 1980 mm Table dimensions:400 x 800 mm T-slots:7 St.,14 x50 table load:300 kg spindle:SK40 turning speed range:63-250 U/min speed steps work spindle:18 spindle speeds::50- 2500 n/min feeds:10-500 mn/min Documents:vorhanden

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine without toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device