freezing room used for sale

Make: BITZER Type: S6G-25.2Y Funding volume: 101.1 m3/h year built: BITZER two-stage, 25 KW at minus 35C for freezing, shock freezer Price 3,300,- Info: 0043-6641838175 or info@frigocom.at

Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request

Nitrogen tunnel 600 mm wide x 7000 mm long. Excelent condition. New SS belt. 3x 380 V

Shock evaporator, TK evaporator ECO 54B12, with 4 fans, Y.O.M. 2013 with 12 mm slats for shock.with defrosting heating. Power in KW 45.

Evaporator for freezer, shock freezer, evaporator, make: Güntner with two pieces fan (650mm diameter), quick fan, blowing, Lamb spacing is 12 mm 55 litres capacity

Brand: Guntner/ Bitzer Model: KCZ 110-60 Year of production: 2009 Power: 110kW Refrigerant: R23 / R507 Compressors: 4 pcs Bitzer (piston) (2pcs - 6F-40.2Y-40P and 2pcs — 6F-50.2Y-40P) Сapacitor: Güntner S-GVH 090.2A/2×3-N(D) Еvaporator: 2 pcs Güntner S-GFN 080/1×2-24-12 Сontrol cabinet, automation

Bitzer unit Two-stage with 2 compressors Bitzer Type S6F-30.2Y, including condenser, collector switch box

Bitzer unit Two-stage for freezer and blast freezer, with 2 compressors Bitzer type S6G-25.2Y, including condenser, collector Control box Converted to the compressor. Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

OBTAINING LIQUIDITY - LEASING / HIRE-PURCHASE POSSIBLE ASK FOR AN INDIVIDUAL NON-BINDING OFFER! LEASING POSSIBLE FROM 674,-€ This is a NEW blast chiller / blast freezer from the manufacturer Irinox, type MF 100.1. This is a device for blast cooling/blast freezing hot food or unprocessed foods. A sturdy stainless steel entry ramp for the trolley. The system is an exhibit of a trade fair, still unused. The external refrigeration unit UC100 is still in its original packaging and is new. The cell may show minimal signs of use due to transport. The RRP for the MF 100.1 including the refrigeration unit is: € 51,592 net. + VAT. IMMEDIATELY AVAILABLE FROM STOCK ! OUR USED EQUIPMENT SERVICE FOR YOU: - 12 months warranty by Irinox - High-quality branded devices at fair prices - Professional and competent advice - before and after the purchase - Shipment or self-collection ...

Used Cryogenic Freezing Tunnel LINDE, Type: Cryoline L8 -120 - LINDE control type: LR-230 - Length: 8 m - Width: 2.10 m - Height: 2.50 m (when open) - Length of wire conveyor belt: 7.3 m, width: 1.21 m - Powered by liquid nitrogen Viewing and other dates possible on request.

Evaporator dry air cooler Guntner S-GHN 080.2F/212-HHS50. E with a cooling capacity of 50 kW | ChillerTech - Cooling/heating devices available from stock! Basic information: -Manufacturer: Guntner -Model: S-GHN 080.2F/212-HHS50. E -Cooling capacity: 50 kW at 8 degrees Celsius -Year of production: 2008 -Capacity: 86.5 L - Type of fans: axial -Fan type: VT01258 Device available immediately Check out our other cooling/heating equipment...

Compound plant Bitzer with 6 pcs. compressor Bitzer S6F-30.2Y, in a container as a machine room, with control box fixed wired and condenser with 6 fans on the container.

Blast Freezer Refrigeration Unit Bitzer 16 HP Two-stage with evaporator LH135-S6j-16.2Y, 63,5 cbm/h Vaporizer Crocco Italy

Koma blast freezer refrigeration unit with Bitzer compressor S6F-30.2Y, as solo compressor or S66F-60.2Y, tandem compressor Refrigeration unit with compressor, subcooler, oil separator, liquid separator, collector, filter, pressostats, control box. All on one rack, easy to transport.

Vegetable Blanching and freezing line consist of the following equipment: 1. Washing bath with transporter NIKO 2. Blanching machine NIKO with transporter (water heating 75kW or steam 350kg-500kg/h) 3. Cooling bath NIKO 4. Vibro table for drying vegetables NIKO 5. Liquid nitrogen freezing tunnel Viessmann Line capacity 1000 kg depending on the product. All equipment is working. Now it is disassembled and ready for shipment. Was used for mushrooms blanching and freezing.

Blast freezer stainless steel Friulinox FR020143020, blast chiller, 230 V, 0,59 kW, 3,4 A, Cold room 32x60x70 cm, 3x1/1 GN, Dimensions set-up 56x70x53 cm, Original price 3065,00 €

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -pneumatically operated -Year of construction: 1996

Multifunctional punch, punch, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatic: operated -Piston stroke: 20 mm -Pressure capacity: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of construction: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

We offer 4 system rooms with L-shaped ceiling Basic dimensions: 
 Room 1: 2,750 m x 5,015 m; H = 2,880 mm, left H = 2,705 mm, Room 2: 9,300 m x 4,910 m; H = 2,880 mm, left H = 2,705 mm, 
 Room 3: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm, Room 4: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm. The walls are made of double-skinned, powder-coated sheet steel filled with mineral wool, equipped with 6 mm float glass. They offer a sound insulation of approx. 25 dB at 1,000 Hz and are also partly equipped with air slots for an air passage of 300 cubic meters/hour. The surface is powder-coated. The ceiling is a sheet steel cassette ceiling (distance DTR = approx. 1,018 mm) made of perforated cassettes, surface powder-coated, grid 625 x 625 mm, cassettes clamped, profile rails not visible. Thermal and acoustic insulation by 35 mm mineral wool, highly compacted, alu ...

1. Cleanroom incl. ventilation technology a Manufacturer: REUKO Klima-Service GmbH & Co. KG b. Type: individual solution c. Date build: 2012 d. Use: idle operation for several months, reconstitution of medicinal products in 2 clinical trials (including cytostatics) e. Clean Room Classes: D (for Isolator environment) f. Area/rooms: Slice and laboratory (with separate air lock for goods) g. Control: Individual solution by ELREST (DDC-Controller) 2. Insulator a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, 3. Particle Analyzer a. Manufacturer: KM-Optoelektronik b. Type: PCSS c. Date build: 2010

2 pcs available can also be used for other rooms of the food industry Dimensions: Also single for sale per piece 500,00 Euro

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 250 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: On work bench: Working bench: Length: 1600 mm Width: 700 mm Height: 850 mm Rear drive: SIMONET Headstock with reduction gear Driving plate Set of collets: W20

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 190 mm Distance between centres: 750 mm Swing over cross-slide: 240 mm Swing over bed: 390 mm Swing in gap: 580 mm Spindle hole: 54 mm Taper in spindelstock MK: 4 Taper in spindle: Camlock: 6" D1 Spindle speeds: number (steps): 16 from: 25 rpm up to: 2000 rpm Taper in tailstock:: 4 MT Spindle stroke: 155 mm Feeds: length: from: 0.04 mm/r up to: 1 mm/r Frontal: from: 0.02 mm/r up to: 0.5 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 1170 kg Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 1500 mm Various accessories: Digital readout number of axis: Manufacturer: HEIDENHAIN Face plate diameter: 380 mm 3-jaw chuck diameter: 200 mm Set of jaws hard Set of jaws Coolant system Quick closing attachment Chuck adaptor Fixed s ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: stepless from: 45 rpm up to: 3100 rpm Step-down gear: 1:5 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 / 0.9 kW Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1400 mm Various accessories: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive Drawer(s) Headstock with reduction gear 3-jaw chuck diameter: 110 mm 3-jaw chuck diameter: 110 mm 4-jaw chuck diameter: 110 mm Driving plate Macnetic chuck diameter: 100 mm Set of collets Drilling tailstock Hand rest Cross slide CNC

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm Taper in tailstock:: 2 MT longitudinal: Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Knee-operated reversing switch Clutch and brake Lamp Quick closing attachment Chip protector Toolholders

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: W25 number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Feeds: Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2200 mm Width: 800 mm Height: 1650 mm Various accessories: On work bench: Working bench: Length: 2150 mm Width: 770 mm Height: 900 mm Driving system for milling and grinding attachment 3-jaw chuck diameter: 100 mm Set of jaws hard Drilling tailstock Chip protector

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 675 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 6 from: 270 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 2000 mm Width: 700 mm Height: 1500 mm Various accessories: Working bench: Length: 2660 mm Width: 770 mm Height: 900 mm Rear drive Foot switch Drawer(s) Belt-tensioning device for milling/grinding att. Drilling tailstock Drill chuck

SMEVA 48 M2 Product number:M18-7071 Cooling capacity:0,001 kW Dimensions:8000 x 6000 x 2480 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold room of 48 m2, two entrance doors, 5 drawer kabinets and 10 glass doors (5 frames). Visit also our website: used-refrigeration

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Quick closing attachment Drill chuck Turret carriage

SMEVA 27 M2 Product number:M18-7070 Cooling capacity:0.001 kW Dimensions:9000 x 3000 x 2780 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold store with two rooms (15 m2 and 12 m2), an entrance door per room and 10 glass doors (4 frames). Visit also our website: used-refrigeration

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 70 mm Distance between centres: 315 mm Swing over cross-slide: 85 mm Swing over bed: 155 mm Spindle hole: 12 mm Spindle speeds: number (steps): 12 from: 135 rpm up to: 2500 rpm Machine´s weight about: 150 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Sheet metal base Rear drive Lamp Belt-tensioning device for milling/grinding att. 3-jaw chuck diameter Set of jaws hard Set of collets Drilling tailstock Rotary centre Set of centres Drill chuck Hand rest

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Spindel nose for collets: W 20 Taper in spindle: Threaded Spindle speeds: number (steps): 24 from: 45 rpm up to: 3100 rpm Pitch of leadscrew: 4 mm Diameter of leadscrew: 40 mm Taper in tailstock:: 2 MT Feeds: number (steps): 8 length: from: 0.020 mm/r up to: 0.30 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.50 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1375 mm Width: 670 mm Height: 1210 mm Various accessories: 3-jaw chuck Quick closing attachment Quick change tool: MULTIFIX Set of collets: W 20 Tool holder with elements Lamp Drilling tailstock Clutch and brake 2 drawers

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: W20 Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Grinding attachment for collets B8 Wheel arbors 3-jaw chuck diameter: 100 mm 3-jaw chuck diameter: 100 mm Set of jaws hard Face plate diameter: 200 mm Driving plate Set of collets Set bell collets Tailstock ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Base-mounted type: Belt-tensioning device for milling/grinding att. 4-jaw chuck diameter Quick closing attachment Drill chuck Hand rest Fixed steady

Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 600 mm Swing over cross-slide: 177 mm Swing over bed: 340 mm Swing in gap Spindle hole: 40 mm Taper in spindelstock MK: 5 Taper in spindle: Camlock: D 1-4" Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 5 MT Spindle diameter: 60 mm Feeds: number (steps): 48 length: from: 0.015 mm/r up to: 0.35 mm/r Frontal: from: 0.015 mm/r up to: 0.35 mm/r Rapid motion: 4 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.70 HP Total power required: 6.30 HP Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1730 mm Width: 970 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Coolant system Quick closing attachment Set of steel holders Lamp Drilling tailstock

Base area: 3000mm x 3600mm Height: 3180mm Wall thickness: 90mm No door!

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Milling attachment Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 210 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 200 kg Overall dimensions machine: Length: 2500 mm Width: 800 mm Height: 1300 mm Various accessories: Working bench: Length: 2000 mm Width: 700 mm Height: 900 mm Driving plate Drilling tailstock Drill chuck Fixed steady

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Speed potentiometer 2 drawers

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Spindle speeds: number (steps): 24 from: 58 rpm up to: 2900 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.7 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1500 mm Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive 3-jaw chuck diameter: 120 mm Set of collets: W 20 Set of centres Drill chuck Grinding attachment Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 45 mm Inner taper type: 38 F Taper spindle threaded Spindle speeds: stepless from: 90 rpm up to: 2600 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: pedal-operadet reversing switch Coolant system 3-jaw chuck diameter: 100 mm Quick closing attachment Drilling tailstock Lever operated cross slide