frame saw used for sale

IRON SAW Cutting diameter: 100 mm Blade dimensions: 280 mm Speed range: 10, 20, 40, 80 RPM Cutting range 90 ° flat: 120 x 100 mm Cutting range 90 ° round: 100 mm Length stop: 500 mm Semi automatic electric fence Automatic sawing cycle Pneumatic clamping prepared for pneumatic feeder Total power: 1.5 kW Machine weight: 700 kg Condition: good Accessories: 18 blades, roller conveyor 2 m

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Operating hours: 54112 Technical data Cut range: round up to: 10 - 260 mm Square: 260 x 260 mm vertical hydraulic Automatic Cut length: min.: 5 mm max: 680 mm Max. automatic forward feed length: 680 mm stepless from: 15 m/min up to: 125 m/min Band length: 4115 mm Band width: 41 mm Sheet thickness: 1.3 mm Voltage 50 Hz 3x: 380 Volt Power: 4 / 6.5 kW Machine´s weight about: 1915 kg Overall dimensions machine: Length: 2125 mm Width: 1930 mm Height: 2100 mm Various accessories: Automatic forward feed Material bearing lenght: 1 m Roller conveyor Coolant system Chip conveyor

Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Weight 2000 kg Delivery term: ~ 3 months.

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Square: 250 mm Execution: Horizontal hydraulic Automatic Cut length: min.: 3 mm max: 2 X 400 mm Cutting speed: stepless from: 14 m/min up to: 116 m/min Roll diameter: 460 mm Band length: 4100 mm Voltage 50 Hz 3x: 380 Volt Power: 4.00 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1350 mm Various accessories: Coolant system

1 new Holtec PICCOLO the Piccolo is handy, precise and flexible. mobile parcel crosscut saw in light design, e.g. for cutting and finishing on sawn timber packages Chain set with STIHL chain Type Rapid Super 0.404" for extremely fine surfaces and two-sided adjustable guide rails (can be used four times) Electric motor 7.5 kW great cutting performance for packages up to 1.15 m x 1.15 m and roundwood diameter up to 1.30 m Sword Length: 1.60 m

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 410 mm Square: 410 mm hydraulic Automatic Cutting speed: stepless from: 10 m/min up to: 100 m/min Table inclination right side: 60 ° Roll diameter: 450 mm Band length: 5300 mm Band width: 34 mm Sheet thickness: 1.1 mm Vice pressure max.: 3 - 25 bar Voltage 50 Hz 3x: 380 Volt Saw motor driving power: 2.2 kW Machine´s weight about: 2300 kg Overall dimensions machine: Length: 3250 mm Width: 1910 mm Height: 2100 mm

UWM KALTKREISSAEGE TYPE 315 â Zaagblad 315/350 mm - Dubbel vertek - 2 Snelheden - Koeling - Beschermkap - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Saw blade grinding machine Schmidt Tempo ECT 502 Handling with robot and 4 charging stations for neutooth and re-sharpening of HSS saw blades. With CBN deep grinding for the highest quality and cost-effectiveness and robot loading for manless grinding. 2019 technically overhauled and prepared for grinding with oil. Grinding range: 60 to 520 mm Saw blade thickness: max. 6 mm Number of teeth: 20 to 999 - Automatic charging system with industrial robot - AUTOPOS: automatic positioning of the saw blade to the grinding wheel - TEMPOTRONIC control - Special tooth shapes: 10 forms freely programmable and stored - Full encapsulation - Separate control cabinet - Data entry for batch processing via PC - Integrated halogen lamp - Automatic central lubrication - Operating instructions and operating tools

2019 technically overhauled CBN or DIA grinding in deep grinding Cover / Schalldaemmhaube with viewing window Interior lighting by halogen lamp Separate control cabinet with screen display and operator guidance Special tooth shapes: 10 forms freely programmable and stored Automatic, motorized central lubrication 1 piece of grinding wheel flange Centering pad with bolts ( x16 mm) 1 set centering rings Normal access and user manual Operating tool Colour pigeon blue Grinding range of 60 - 520 mm Saegeleaf thickness max. 6 mm Zaehne numbers 20 - 999 Saegeleaf holder bolt 16 (8) mm Grinding wheel diameter 200 mm Maximum tooth height 32 mm Grinding wheels bore 32 mm Grinding wheel drive 4 kW Grinding wheels Speed 5730 rpm Weight approx. 1150 kg

Code: N0004 Brand: SICAR Model: SEGA 315 - Norme CE Professional panel saw SEGA 315 with carriage 3200 mm , blade 315 and scoring unit with separate motor - CE Standard Three-phase main motor 7,5 hp. Parallel guide on round bar with cast iron support and micrometric adjustment, blade lifting and tilting by handwheels, tilting blade unit with integrated scoring unit, aluminium carriage sliding on ball bearings, fence on extendable frame with two reversible stops. TECHNICAL DATA: Main worktable mm 910x550 Additional worktable mm 910x760 Additional lateral worktable mm 500x550 Main blade speed rpm 4000 Scoringunit speed rpm 8000 Blade diameter mm 300x30 Scoring diameter mm 120x20 Cutting height at 45° mm 75 Cutting height at 90° mm 100 Max cutting distance between blade and scale mm 1250 Carriage dimensions mm 3200 Three-phase motor power HP 5,5  ...

Machine for chamfering of HSS and segment circuit saegen - Saegeblatt: 80 - 910 mm - Grinding wheels: 200 x 32 mm - Weight: approx. 1800 kg - Full cladding - integrated wet grinding device - Signal lamp for displaying the end of work - Halogen lamp - Central lubrication - Accessories - Operating instructions

HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA

2019 technically overhauled and repainted. - Grinding range of 20 to 400 mm with grinding wheel of 200 mm - up to 450 mm with smaller grinding wheel - Zaehne numbers 20 to 999 - Tooth ahehes 0 to 20 mm - Grinding wheel diameter max. 200 mm - Stroke numbers 40 to 180 - Weight approx. 990 kg - Automatic grinding wheel delivery via electronic preselection; max. removal 4 mm. - Removal sequence according to zaehne number preselection in 0.02 mm increments - Automatic grinding wheels profiling device with automatic. Compensation of removal. - Cycle can be pre-predictable according to zaehne number. - Leaf stuetze - Central lubrication - Accessories - Operating instructions and operator tool

Saw blade grinding machine for diameters up to 920 mm The machine can be inspected and tested under electricity, upon request. Saegeleaf diameter: 200 to 920 mm Saegeleaf width: up to 10 mm Number of teeth: 20 to 999 Tooth depth: 0 to 25 mm Tooth pitch: max. 50 mm Grinding wheel diameter: 300 mm Weight: 1,700 kg Saw blade diameter for bevels: 280 - 920 mm

HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA

Suitable for automatic grinding of HM circular saeblades on chest and jerks in one clamping. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in one drain. Condition: Completely rebuilt, diameter extended, repainted. Up to the diameter of 1600 mm ! â?¢ Full cladding â?¢ Set-up for central cooling agent connection â?¢ Device for central suction â?¢ Automatic central lubrication â?¢ Grinding wheel holder â?¢ 2 magnetic saege leaf holders â?¢ Centering rings, - huelsen â?¢ Saegeleaf thickness: up to 14 mm

Circular saw blade Anfasautomat The BK 450 circular blade contact machine automatically handles the lateral chamfering or bending of HSS saegee blowers up to 450 mm in diameter. The special feature of the machine is that it is connected to two separate grinding units and thus the saege leaf is fasted on both sides at the same time. This means lower ruest and faster grinding times. Diameter range: 50 - 450 mm Tooth pitch: 2 - 12.5 mm Saegeblatt thickness: max. 4 mm CBN (for groove grinding): 25x 8 and 30x 8 mm CBN or bakelite: 60 x12 mm Weight: approx. 115 kg Dimensions (L x W x H): 735 x 630 x 1350 mm

Schmidt Tempo ASG 1400 Saw blade grinding machine up to 1,400 mm Overhauled and repainted â?¢ Saw blade holder of 250 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 1 set of centering rings â?¢ 1 pc. grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large halogen lamp, good illumination, reduced heat formation â?¢ New, up-to-date control panel â?¢ Connection to central dust extraction â?¢ Interchangeable wheel scissors with the required interchangeable wheels for common number of teeth

Schmidt Tempo ASG 2000 Saw blade grinding machine up to 2,050 mm technically overhauled and repainted in 2019. Equipment and accessories: â?¢ Saw blade holder of 250 mm with centering bolt 32 mm, hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ Centering rings bore 32 mm, outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm Diameter, 32 mm bore â?¢ Large working light â?¢ Interchangeable wheel scissors with interchangeable wheels for need. Tooth numbers Technical data: â?¢ Grinding range 315-2050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm â?¢ Saw blade thickness maximum 20 mm â?¢ Stroke numbers continuously 21-126 Z/min â?¢ Connection value approx. 4.5 kW (400V / 50 Hz)

Saw blade grinding machine up to diameter 3,000 mm Model Schmidt Tempo ASG 3000 2019 technically overhauled and repainted â?¢ Grinding range 315-3050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm - saw blade thickness up to 20 mm â?¢ Stroke numbers continuously 21-126 Rpm - Connection value approx. 4.5 kW (400V / 50 Hz) â?¢ Saw blade holder of 550 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 2 centering rings bore 32 mm outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large LED light, good illumination, reduced heat formation â?¢ Interchangeable wheel scissors with the interchangeable wheels for common number of teeth Illustrations: Schmidt Tempo ASG 2000.  ...

Saw blade grinding machine with car. bevel up to 1050 mm by CBN or DIA cut in deep grinding process Schmidt Tempo XL Grinding range 80 to 1050 mm Saw blade thickness up to 10 mm Mounting bolt 16/32 mm Grinding wheel diameter 200 mm Spindle rotary screw up to 5,700 rpm Working speed 3 to 50 z/min Integrated coolant device Dimensions 1,400 x 1,750 x 2,250 mm Weight approx. 1,700 kg

Saw blade grinding machine Schmidt Tempo ECE 45 2019 technically overhauled CBN deep-cut process For regrinding and for the production of circular saw blades with angular and arched tooth according to tooth shape A, AW, B, BW, and C according to DIN 1840 for circular saw blades from 20 mm to 550 mm. â?¢ Clock and grinding time display â?¢ automatic, motorized central lubrication â?¢ Centering holder with centering bolts 16 mm . . . . . . . . . . . . . . . . . . â?¢ Clamping nut with mech. Clamping force reinforcement â?¢ Saw blade holder â?¢ Preparation for grinding with oil â?¢ Centering rings as needed â?¢ LED machine light â?¢ Program for round grinding â?¢ Reporting light â?¢ Tool set

Saw blade grinding machine with partial gearbox Model Schmidt Tempo G 400 For grinding circular saw blades from 20 to 400 mm â?¢ Automatic grinding wheel delivery via electronic preselection; max. removal 4 mm, removal sequence after tooth number preselection in 0.02 mm increments â?¢ Free grinding after entered saw blade revolutions â?¢ Central lubrication â?¢ 1 pc. saw blade holder: approx. 185 mm, bolt 16 mm with mech. Force-tensioning nut; Centering rings 16 x 22, 27, 32, 40 and 50 mm â?¢ 1 pc. saw blade holder: approx. 80 mm, bolt 16 mm â?¢ 10 pcs. grinding wheels of 200 mm, various widths

HABUSCH BANDSAEGE TYPE CY355 - Half-automaat - Hydraulic - Traploos adjustable snelheid 20/80 m/min - Dubbel vertek - Zaagdruk hydraulic instelbaar - Koeling - Zaagblad 3770 x 34 x 1.1 mm - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

KESMAK BANDSAEGE TYPE KMY DG 350 - Half-automaat - Hydraulic - Traploos adjustable snelheid 20/100 m/min - Verstek - Zaagdruk hydraulic instelbaar - Koeling - Zaagblad 4860 x 34 x 1.1 mm - Noodstop - Documentatie - Weight 1260 kg - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm

OZCELIK ALU-KALTKREISSAEGE TYPE METEOR I 500 - Half-automaat - Zaagblad 500 mm - Dubbel vertek - 4 pneumatic clamps - Nevelsmeerssysteem - Roller baan 300 cm met lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Diameter saw blade mm: 150 Drilling depth max mm: 30 Total connection KW: 2.4 Weight Kg: 324

Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL

Roll diameter mm: 800 Engine: 3.6 KW

Optimization crosscut saw Cutting width mm: 850 Cutting length mm: 400/1500 Cutting height max mm: 140 Saw blade diameter mm: 600 Total connection kW: 30

KARMETAL BANDSAEGE TYPE KMT 250 CRAFT DM - Traploos instelbare lintzaag snelheid - Dubbel vertek - Zaagdruk hydraulic regularbaar - Snelspanklem - Koeling - Automatic afslag - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Cutting length max mm: 6000 Saw blade overstand mm: 115 Diameter saw blade mm: 430 Vorritzer: Yes Machine Control: Microprocessor - G Drive 2 D Total connection kW: 18 Weight Kg: 19,000 Loading and unloading system "Essedue" - Manipulators

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

Height under guides: 0 mm Throat: 0 mm Table length: 0 mm Table width: 0 mm Semi automat electrohydraulic double column Two column construction Perfect rigidity and accurate with fine cut Cutting 90°:       600Ø Cutting flat 90°:  600 x 600 mm Cutting speed Vario:10 - 115 m/min. Circle blade size: 6200 x 51 x 1,3 mm Power:             4kW Length:            3.150 mm  Width:             1.260 mm  Height:            2.250 mm  Weight:            1.750 kg 

Key data: 300 , 300

Capacity round maximum diameter: 300 mm Angle degrees maximum: 300 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Cutting 90°:        300Ø Cutting flat 90°:   300 x 300 mm Feed single stroke: 10mm Feed multiple stroke:6.000mm Cutting speed Vario:0 - 115 m/min. Circle blade size:  4640 x 41 x 1,27 mm Power:              4,1 kW Chip conveyor:      yes  Length:             5.800 mm  Width:              3.000 mm  Height:             2.600 mm  Weight:             5.000 kg 

Saw units: 2 Cutting length max mm: 2200 Cutting height mm: 70 Saw blades tiltable: Yes Diameter saw blade mm: 250 Cutting length min mm: 240 Main motor kW: 1.1 Pneumatic tensioner: Yes Saw feed: pneumatic

Distance sawing max 90° mm: 2800 Diameter saw blade mm: 300 Main motor kW: 3.3 Weight Kg: 500

Key data: 700 , 410 , 430

Capacity round maximum diameter: 700 mm Angle degrees maximum: 410 Capacity square: 430 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Capacity 90°:     410° Cutting flat 90°: 700 x 410 mm Capacity L 45°:   430 x 410 ° Capacity R 45°:   500 x 410 ° Feed single stroke:75mm Circle blade size:5800 x 41 x 1,3 mm Power:            5,5 kW Length:           2.800 mm  Width:            1.500 mm  Height:           2.000 mm  Weight:           1.850 kg 

Three flywheels Diameter mm: 900

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Make: MEBA Type: 410 DG 700 YOP: 2003 Capacity 90°:       410° Cutting 90°:        700 x 410 Ø Capacity L 45°:     560 x 400 ° Capacity R 45°:     600 x 400 ° Feed multiple stroke:1.500mm Min. cutting length:75mm Cutting speed Vario:15 - 150 m/min. Circle blade size:  6760 x 41 xq1,3 mm Power:              5,5 kW Length:             2.800 mm  Width:              3.250 mm  Height:             2.300 mm  Weight:             3.300 kg 

Weibert Z-400-EL Format circular saw Sliding table 420x3200 mm anodized, cutting length 3500 mm Motorized height adjustment and inclined position saw blade 3 Cutting speeds: 3000/4000/5000 rpm Car. Star/Triangle Switch 7KW 400V 50HZ Vorritz engine 1.3 kW 3 Cutting speeds: 3000/4000/5000 rpm Cutting height at 90° 125 mm, at 45° 90 mm Cutting width between saw blade and parallel stop 1350 mm Laying table (1420 x 650 mm) with miter stop with 2 folding stops G&RO-Z-400-EL

Capacity round maximum diameter: 60 mm Angle degrees maximum: 300 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Capacity 90°:      0 - 60 Gr ° Cutting 90°:       300Ø Cutting flat 90°:  330 x 260 mm Capacity L 45°:    270 x 200 ° Capacity R 45°:    200 x 160 ° Cutting speed Vario:15 - 100 m/min. Circle blade size: 3320 x 27 x 0,9 mm Power:             2,2 kW Length:            2.830 mm  Width:             2.320 mm  Height:            2.300 mm  Weight:            1.105 kg 

Capacity round maximum diameter: 0 mm Angle degrees maximum: 260 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH - ID 6223 Make: PILOUS Type: ARG 260 Plus YOP: 2020 Hours: 10 Capacity 90°    260 ° Cutting flat 90°   300 x 200 mm Capacity L 45°    175 ° Capacity R 45°    200 ° Cutting speed Vario     35 + 70 m/min. Circle blade size    2880 x 27 x 0,9 mm Power    1,4 kW Optional roller conveyor D-300 x 2000 mm = EUR 550 (6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650 (10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Length     1.900 mm Width       1.800 mm Height     2.000 mm

Capacity round maximum diameter: 280 mm Angle degrees maximum: 235 Capacity square: 185 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH - ID 6222 Make: PILOUS Type: ARG 235 Plus YOP: 2020 Hours: 10 Capacity 90°   235 ° Cutting flat 90°   280 x 180 mm Capacity L 45°    185 ° Capacity R 45°     115 ° Cutting speed Vario      40 + 80 m/min. Circle blade size       2710 x 27 x 0,9 mm Power     1,5 kW Dimensions Length    1.930 mm Width      1.610 mm Height     2.000 mm

Band saw of the Fa DoAll Dimensions 1.3m wide; 1.3m low; 2m High Work table area 850670mm max workpiece through-the-box approx. 300mm Pre-laying infinitely variable speed transmission Welding device with grinding stone for band saw blades Feed infinitely adjustable; Return without function

Height under guides: 0 mm Throat: 1050 mm Table length: 750 mm Table width: 800 mm MACH-id         6046 MAKE              Mossner TYPE                SSF 1050 YOP                  1991 SPECIFICATIONS Cutting         90°1000 Ø Cutting speed Vario         18 - 160 / 240-2280 m/min. Power            5,5 kW DIMENSIONS Length            1600 mm Width             1000 mm Height            2200 mm Weight           1740 kg - Wheel size : 500 - Table size: 750 x 800 - Troath: 1050  

Capacity round maximum diameter: 305 mm Angle degrees maximum: 0 Capacity square: 360 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id     5464 MAKE         TMJ CZ TYPE           PP 302 YOP             2010 SPECIFICATIONS Capacity       90°305 ° Cutting flat        90°360 x 305 mm Cutting speed Vario         16 - 73 m/min. Saw band size        3660 x 27 x 0,9 mm Power       1,5 kW DIMENSIONS Length      1800 mm Width       1800 mm Height       1650 mm Weight        1000 kg

Capacity round maximum diameter: 325 mm Angle degrees maximum: 90 Capacity square: 360 mm Workpiece height: 300 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id    5392 MAKE        MEBA Germany TYPE          321 YOP            80 er SPECIFICATIONS Bandsaw / Circelblade / Automat         Bandsaw Angle  L / R Degrees       L & R 45 Gr Cutting capacity 90 ˚ Ø       325 mm Cuttting capacity 90 ˚ Flatt      360 x 300 mm blade dimensions          3800 x 34 x 1,1 mm roller conveyor / push up / measuring       3200 mm Cutting speed M/min          Vario 115 M/min DIMENSIONS Length        1900 mm  ...

Catalog number H0242 - new machine, in stock - CE certificate - max diameter of the blade 400mm - adjustable up / down wheel and 45 degree angle - cutting length 3200mm - cutting width 1350mm - Cutting height 90 ° / 45 ° - 120 / 75mm - trolley on steel bars - the diameter of the undercut 120 x 20 mm - saw blade rotation of 3000.4000.5500rpm - undercut speed of 9000rpm - 5.5 kW / 400 V motor - Subcutaneous motor 1,1 kW - digital display - electric saw setting Overall dimensions: - length 3220mm - width 3150mm - height 900 mm - weight 800kg - the table extension - widening the table - angle cutter Complete with main blade and cutting disc Net price: 20670 PLN Net price: 4921 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)