134,860 used machines on RESALE, but how to find them? Machine Search
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DGW-50-500 -Stroke: 500 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 -Max. pressure: 12 bar -Dimensions: Ø 57 x 700 mm -Weight: 5.7 kg
x-travel: 4.300 mm y-travel: 1.500 mm z-travel: 1.800 mm Control: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mm T-slots: 9 T-slot - distance: 250 mm T-slot - width: 28 mm rapid traverse: 15.000 mm/min feeds: 10.000 mm/min milling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpm transmission ratio: 2 spindle drive: 28 kW Internal cooling system: 20 bar chip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kW weight of the machine ca.: 40.1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
planing lenght: 525 mm table surface area: 500 x 300 mm workpiece height: mm dimensions of machine L x W x H: 1,98 x 1,06 x 1,42 m Accessories: vice (width of jaws 200 mm) on rotary plate, vertical shaping device, tool clearing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 75 mm -Type: 0 530 314 001 -Piston rod: Ø 20 mm / M14 -Holes: Ø 20 mm -Dimensions: Ø 65 x 300 mm -Weight: 3.0 kg
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg
used
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 400 mm, 300 mm
Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !
Cylinder head overhauled, ready for installation 2 pieces in stock
Motor control for an MWM 518A for sale. Other spare parts for the engine also available: -Starter -Turbocharger - Exhaust manifold with temperature sensors -Oil pump
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type 0510 525 311 -Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg
MWM 518A turbocharger for sale. Other spare parts available: - Exhaust manifold with temperature sensors -Starter - Expansion tank -Water pump
Starter MWM 518A Bosch 0 001 402 065 24V, 4HP Other spare parts for the engine also available: -Engine timing -Turbocharger - Exhaust manifold with temperature sensors -Water pump
Exhaust manifold MWM 518A with temperature monitoring for sale Other spare parts for the engine also available: -Starter -Turbocharger -Engine timing -Water pump
Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,500 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...
# HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm) If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data: - With a heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Starting pressing speed 8 mm/sec - Table size/heating plate size 522 mm deep, x522mm wide - Plunger size/heating plate size 498 mm deep, x498mm wide - 2 heating plates, electrically heated, up to 200 degrees - Oil temperature monitoring - Circulating oil cooling on the hydraulics - Pressure Holding Valve 0 to 3600 sec - Pressure adjustment from ...
Inv. Num. : 7637 Type: Robot 500 Produzent: Vemag Erzeugt: Parametern: Portionsgewicht: 5-30.000 g Kapazität: 2800 kg/h
Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 9,540 mm Number of fields per row of shelves: 05 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 100 pcs. Pallet spaces per field: 100 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of shelve ...
Balancer, machine balancer, spring balancer, cable extension, weight compensator, reel -Manufacturer: Wampfler, spring balancer type 5X2.4 40801 -Load capacity: 1.8 - 4.5 kg -Cable extension: m -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/230/85 mm -Own weight: 3.4 kg/piece
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet -Width: 545 mm -Depth: 545 mm -Height: 1025 mm -Door: lockable, without lock -Weight: 23 kg
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg
Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 500 mm -Mounting: Short taper 8 (Ø 136-139 mm) -Bolt circle: Ø 173 mm -Through hole: Ø mm -Groove width: 20 mm -Dimensions: Ø 500 x 120 mm -Weight: 58 kg
rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg
roller conveyor, conveyor track, roller conveyor support, conveyor track support, support -Support: Adjustable support for roller conveyors or similar -Height: 570 to 800 mm -Width: 480 mm -Number: 19x support available -Price: per piece -Dimensions: 475/130/H570 mm -Weight: 7.7 kg/piece
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 6 EW 20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 4 EW 20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 5 EW 20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg
faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 560 mm -Bolt circle: Ø 235 mm -Groove width: 27 mm -Through hole: Ø 109 mm -Dimensions: Ø 560 x 290 mm -Weight: 116 kg
Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 5 m -Transport dimensions: Ø 280 x 610 mm -Weight: 32 kg
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 3,75 EW20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3000 x 1500mm 5000w With auto pallet changer & LiftMaster
Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 5.4 m -Transport dimensions: Ø 150 x 600 mm -Weight: 6.7 kg
Load hook, retractable safety device, load securing device -Load securing device: Type 16 -Load capacity: 500 kg -Rope length: 6.7 m -Note: not for persons -Dimensions: 720/240/140 mm -Own weight: 12.8 kg
This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210
Tires, solid rubber tires, forklift tires -Manufacturer: Rota, solid rubber tires 2 pieces -Tire size: 200/50-10 RIM 6.50F-10 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 440 x 200 mm -Weight: 34.3 kg/piece
Tires, solid rubber tires, forklift tires -Manufacturer: Rota, solid rubber tire type Plus -Tire size: 15x4 1/2-8 RIM 3.00D-8 532/487-2 -Bolt circle: Ø 115 x 18 mm -Recess: Ø 80 mm -Quantity: 1 piece -Dimensions: Ø 380 x 105 mm -Weight: 12.9 kg
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 009 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 150/125/H120 mm -Weight: 3.7 kg
Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm
Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 1 517 222 492 -Shaft: Ø 16 / 17 x 8 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 116/90/H120 mm -Weight: 2.7 kg
Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price
Steam generator, evaporator -Vaporizer: Manufacturer KED, Kurt Ehemann/Type electric vaporizer -Number: 5x evaporators available -Price: per piece -Total dimensions: Ø 330 x 575 mm -Weight: 35 kg/piece
maximum number of results exceeded
please refine your search
