129,230 used machines on RESALE, but how to find them? Machine Search
Hydraulic Press Emanuel 500 ton press Year of construction: 1976 Dimension table: 2500 x 1900 mm Light max: 1490 mm Light min: 550 mm Slide stroke: 940 mm Cushion stroke: 400 mm Side upright clearance: 900 mm
Hydraulic Press MURARO 500 ton Year of construction: 2001 Dimension table: 2600 x 1600 mm Dimension lower table: 2700 x 1600 mm Light max: 1500 mm Light min: 700 mm Slide stroke: 900 mm Cushion stroke: 400 mm Side upright clearance: 770
Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 30 ton Year of manufacturing: 1982
Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Dimensions (L/W/H): 2160x1080x1650 mm Weight: 1500 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller ...
FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...
FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...
We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...
Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph
Fogg & Young C Frame Press 150ton 3400mm wide Upstroking 3x heating zones Eurotherm controllers
ID3356 Corrosion repair framework year/Baujahr 2021 25-28 t Corrosion repair framework Corrosion Touch Up Scaffolding
2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...
The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...
Nominal Power: 400 ton Stroke par minute: 16-48 Adjustable stroke: 10-250 mm Table dimension: 1200 x 1200 mm Ram dimension: 1200 x 1200 mm Distance table – slide: 1000 mm Adjustment slide : 200 mm Motovariator: 22-66 HP
Caterpillar SR4 - Overhauled - 1000 kW - 806 frame
Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Technical data Nominal Power : 30 ton Year of manufacturing: 1973
Hydraulic 60 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 60 ton Year of manufacturing: 1975
Key data: 300 t, 800 mm
Hydraulic Press Emanuel 300 ton Year of construction: 1989 Dimension table: 1600 x 1300 mm Light max: 1130 mm Light min: 350 mm Slide stroke: 800 mm Cushion stroke: 400 mm Side upright clearance: 640 mm
Key data: 800 t, 1350 mm
Hydraulic Press Gigant 800 ton Year of construction: 1997 Dimension table: 3200 x 2200 mm Light max: 1800 mm Light min: 450 mm Slide stroke: 1350 mm Cushion stroke: 510 mm Side upright clearance: no
Key data: 1200 t, 1000 mm
Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no
This Eisele BSD304 is a powerful, electrically driven wastewater pump, designed for reliable use in industrial and construction applications., Thanks to its robust construction and high pumping capacity, this model is ideal for pumping contaminated water, sludge, and liquids containing solids., The pump is driven by a 400V electric motor and combines durability with energy efficiency., The cast iron housing and corrosion-resistant components ensure a long service life, even with continuous use in harsh conditions., , Key features:, , Voltage: 400V (three-phase), Pump type: Centrifugal, wastewater, Suction head: up to approximately 7 meters, Delivery head: up to approximately 20 meters, Pump body material: wear-resistant cast iron, , Suitable for: construction sites, sewage work, agriculture, and water management, , Easy to maintain and ready for immediate use, , The Eisele BSD304 is a re ...
The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1999, Empty weight: 450 kg ...
The Eisele BSE740 EX Explosion-proof is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 2016, E ...
The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1995, Empty weight: 450 kg ...
Dimensions (L/W/H): 3600x800x1900 mm Weight: 2400 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Brückner Type of Machine : Clamping Frame Working width: max. 2200 mm Roller width: max. 2400 mm Number of temperature zones/sections: 3 Calator: 2250 mm Find more here - / Contact us at -
Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price
Decorative holding card TMCC
Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 5549 ...
Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...
Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...
Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...
90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES Engine type: Franz Bangert Getriebemotor scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung ...
Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle -Protection class: IP 54 -Bra ...
Schließrahmen - Frame SBB Letter Press Heidelberg SBB - 560 x 820mm
Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 570 mm, adjustable -Number: 11 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H570 mm -Weight: 12 kg/piece
Viledon Filter Mats, PA/560 G-10 TO Cut dimensions e.g. 2140 x 1229 or 4500 x 1436 or similar. The filter mats are superimposed, partly minimally contaminated on the side wheels, but otherwise as good as new. Delivery price 60% below new price plus VAT, packaging and transport. 8 €/m2 We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Scania Austausch-Motor Typ= DI12-54A-PDE-Steuerung 242KW Aldrehzahlmotor incl.Anlasser,Lichtmaschine.Auch für Pflanzenölbetrieb geeignet. info@miw-zeven.de
Drum sieve used for SM518 new in stock! Used Drum Screen for SM518 new in stock! Punching: 10 mm rectangle; Material thickness: 6 mm perforation: 10 mm rectangle; Thickness: 6 mm Condition: used/ as good as new (screen drum was only used for one test) Condition: used / like new (drum was only for a short test in use) Available: immediately Available: immediately Location: 77966 Kappel-Grafenhausen (near Freiburg) location: 77966 Kappel-Grafenhausen/ Germany (Near Freiburg) We are happy to organize the transport for you! We can arrange transport for you! We also supply new or other used screen drums to all common screening machines (SM620, SM618, T4, T5, Mustang,). Manufactured in our factory in Germany from German, very high-quality, sharp-edged perforated sheet metal. We also provide new or used screening drums for all standard machines (SM620, SM618, T4, T5, ...
Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.
Fischerscope XRF X-RAY 5400 X-ray fluorescence - EDXRF spectrometer Year of manufacture 2010 2010/11 has measured with ca-400 hours of operation, only sporadically in a pilot plant (sputtering LEYBOLD) New price: 100.000 € 5400 x RAY X-ray fluorescence - spectrometer (EDXRF) are designed for use in industrial production facilities, specially designed for continuous measurement in the manufacturing process, to the non-destructive analysis and measurement of thin layers and layer systems. For the industrial requirements and continuous operation, they are particularly robust and low-maintenance design.
System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.
We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350], ...
maximum number of results exceeded
please refine your search
