fp 16 used for sale

sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket  ...

sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of  ...

GE Äkta Purifier 10 FPLC System Box 900 P 900 Pump /10 ml pump heads UPC 900 Monitor INV 907 Valve M925 Mixer / 6 ml mixing chamber Conductivity Flow Cell pH Sample CU 950 Interface/Communication Module FRAC 920 Fraction Collector Unicorn Software

BOBST FISCHER & KRECKE 10 c 1450/1500 mm gearless CI flexo print, Print materials: PE, OPP, CPP, PA, PET, paper, Print possibilityes: 10+0, Fast sleeve change, 4 motor per deck CNC position system, Computer supervision, Web width 1500 mm., Print width 1450 mm., Min/max print repeat 390/1.050 mm., Unwinder and rewinder type: Turret Automatic Shaftless with roll loading /unloading system, Max reel diameter unwinder and rewinder 1000 mm., Thermal oil drying system, Videocamera, Corona treatment AFS 6KW, Web guides, New Celio, 3 solvents vyscosity control, Automatic washing system, Closed chamber doctor blades, N.40 aniloxes, Print Sleeves: 535 sleeves, 60 pcs of adaptors, 6 different sizes, Min. - Max. thickness of materials- min: 12 micron max 200 micron, Max. Mechanical speed - 500m/min, Web slitting before rewinder to separate ups, Detection system for fire fighting system, working width ...

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Type: FPE 3402B No.: 0406470037 EX II 2 GC T4 Motor 1,1 kW Year of construction: 2004 ATB 2860 RPM Dimensions: LWH = 450x200x250mm Weight: approx. 25 kg

Make: Fristam Type: FPE3402C No.: 406641008 Ex-protection Engine: ATB Flender Power: 1.1 kW at 2860 RPM

Type: FPE722C No.: 42439351 Engine: MT motor Performance: approx. 1.5 kW, 2970 RPM Dimensions: LWH = 500x200x230mm Weight: approx. 40 kg Milk bolting DN 40

Type: FP722KF No.: 42441029 with perm for mechanical seal Engine: Flender ATB Loher in F n = 2840 RPM Power: 1.5 kW Dimensions: LWH = 500x200x230mm Weight: approx. 40 kg

Type: FPE722C No.: 0424470326 Engine: ATB in Exx Power: kW 3,3 Year of construction: 2004 n = 2830 RPM Dimensions: LWH = 600 x 300 x 330 mm Weight: approx. 60 kg Frontal connection DN 50, up DN 36 Milk tube

Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

Lid FP 1 in very nice condition x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Digital display Z-502 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch

Fristam FPE1232/185A 30 kW pump capacity: 50.000 - 200.000 l/h The specific profile of their impellers provide for a steady, smooth flow with minimal secondary swirl even at high flow rates. Universal use, gentle product handling, robust, easy to maintain, durable, economical. The Fristam FP’s well-thought-out design provides you with the optimal solution to your specific requirements. Fristam pumps FP are designed with open impellers, with narrow gaps between the impellers and the cover. Combined with the flow-optimised pumping channel, these ensure minimal secondary flow, very gentle product handling even at high volumetric flows, and energy-saving operation. The FPs’ design makes them ideal for hygienic applications. The pumped medium may be homogenous, or contain air, gases or suspended solids.

SMI Pack FP560 L sealer 6114 sealing bars 560mm x 560mm, automatic outfeed conveyor, with aplhanumeric LCD control panel

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

The Schiatti FPS 20 RBS is an advanced straight grinder for glass processing, designed for finishing flat edges and bevels with high precision. Here are the key specifications and features that distinguish this machine: ⚙️Technical Specifications Glass thickness range : from 3 to 20 mm Minimum glass size : 150 × 150 mm Maximum load : 1000 kg Working height : 765 mm Total power : 8.1 kW Water tank capacity : 195 liters Air consumption : 8 Nl/min Front speed : adjustable from 0.5 to 5 m/min Total weight : 1823 kg Features Sharpening of flat edges and facets up to 45° Polishing with cerium oxide (liquid or synthetic) Automatic thickness adjustment Independent adjustment of diamond and polishing wheels Double speed motors for polishing wheels PLC control with input and display of working parameters Closed water cooling system Rubber pads on conveyor chain with  ...

Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Centrifugal pump Manufacturer: Fristam Type: FP7028 Item #: 02130032 Power: 0.25 kW LBH: 450 x 180 x 300

Centrifugal pump Manufacturer: Fristam Type: FP712C Item #: 414433417 Power: 1.1 kW Speed: 2880 rpm LBH: 530 x 270 x 430 mm

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Fandis: Fan FPF12KRGF-S00 -Motor: 24 V DC 18.2 W -Dimensions: 150/150/H75 mm -Weight: 0.5 kg

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Rotary encoder, tachometer, encoder -Spare part comes: from a machining center cover type FP3A -Number: 1x speedometer available -Price: per piece -Dimensions: 83/122/H95 mm -Weight: 1.1 kg

Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg

FPZ ABB motor: 3 kW Condition: after renovation

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

FPZ Effepizeta Motor: 5.5 kW Condition: after renovation

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

PAL FP8 Rotary filler Serial: FP8MC00016 2016, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

PAL FP8 Rotary filler Serial: FP8MC00024 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

Lid milling machine FP4MA-2204 Year of construction: 1987 Serial no.: 20965 Controls: Contour 2 Condition: fully functional

Machine No. 180202

x-travel: 800 mm y-travel: 400 mm z-travel: 300 mm digital readout: Heidenhain table surface area: 1000 x 520 mm turning speed range: 40 x 2000 U/min spindle taper: SK 40 total power requirement: 2,2 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1700 x 1600 x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:

Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

GE Äkta Explorer FPLC 100 Air/General Electric/Cytiva -Box 900 -pH/C 900 monitor -UV 900 UV Detector -UV Flow Cell -P 900 Pump /100ml/min w. Switch Valves Air 900 Control Box -pH Sample -Conductivity Cell -INV 907 Injection V1 Sample Valve V5 Outlet Valve V4 Column Valve V2 Column Valve V 3 -P 960 -M 925 MIxer (2ml) on request 5 and 12 ml) FR 902 Restrictor CU-950 Interface Unicorn Software -Frac 950 Faction Collector warranty

GE/Amersham Äkta Pilot prep. FPLC; Software Unicorn 5.2, further information on request

Serial Number: 482 Construction year: Fbr 2000 Weight: +/- 2,1 tons Power: kW 13 Air pressure: 7-8 Bar Length mm: 7300 Width mm: 1200 Height mm: 2400 Working height: 750mm Transport size L x W x H: 2,5 x 1,2 x 1,2 in mm Maximum speed: 4 m/min Min.-max. glass thickness: 3 - 35mm Min.-max glass size: 100 x 100 -2000 x 3000mm Number of spindles: 7 spindles Condition machine : Excellent Control type: Semi-automatic Electric. Connection: 32A 3P+PE Photos/film available: Photo's available

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: FPU, rotating center point -Type: 8811-5 -Recording: MK5 -Dimensions: Ø 84 x 226 mm -Weight: 3.5 kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

For sale good working CNC milling machine Deckel FP4 AT with two vices and several tools.

Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen -Manufacturer: Pro-face, industrial monitor flat screen touchscreen -Type: FP3710-T42-U -Article No.: PFXFP3710T2AU -Model: 3580406-01 -Dimensions: 475/120/390mm -Weight: 10.4 kg