fo used for sale

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 63 A -Connection: 220 volts -Weight: 110 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 64 A -Connection: 220 volts -Weight: 50 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

Folding sheet press Tränklein BP; good condition; cleaned and tested; Working width 820mm. Bundling press Tränklein BP; good condition; cleaned and checked; working width 820mm.

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Foam block for device installation channel, small flexible foam block -Type: FBA-BK -Item No.: 7202 496 Price: per piece Quantity: 10 available -Dimensions: 75/120/H50 mm -Weight: 1 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift -Free-view mast -Load capacity: 2000 kg -Lifting height: approx. 4000 mm -Forklift shield: 1150 x 405 mm -Dimensions: 350/1150/H2620 mm -Weight: 720 kg

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Electronic control module for folding machines EUROFOLD, FALTEX used. Art.: PS21 Spare part number: 235.102 It can also be used for other types of machines. Is integrated into the vacuum supply system. Controls the operation of the machine, makes it possible to adjust the work by clock; with interruption, by a certain number of sheets; Perform direct and backward counting of the sheet. The photo on the site may differ from the original (we send it on request)

Folding knife Morgana Digifold / MORGANA ET FIRST DIGIFOLD BLADE ASSEMBLY f. Art.: PS4102 Ersatzteil Nr. / parts No126-12-01

Format range: max. 1000 mm, min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, 4-point gluing, motorised format adjustment, servo overhaul folding with program memory, Robatec electronic top gluing unit with 4 application heads, disc bottom gluing unit on the left, feeder with vibrator, belt crusher on the right, left up to max. 30 mm, additional central transport, folding floor module A2 with additional upper and lower centre transport, additional central transport in folding station, pneumatic kicker, counter, Bobst CUBE control, camera surveillance, Small box equipment, pneumatic press belt. Overhaul in 2026: cleaned, checked, painted and with new press belts as well as new feeder and transport belts. Other: Machine can be viewed by appointment while running.

Jungheinrich charging station for industrial trucks Industrial Charging Station, Battery Maintenance Stand If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has three charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Length: 4.15 m Width:  ...

Jungheinrich charging station for industrial trucks 2 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has two charging bays with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufacture: ...

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

Jungheinrich charging station for industrial trucks 4 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has four charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufac ...

Key data: 5 , 300 mm, 200 mm

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Transnorm Rising falling Incline with arch and forerun belt conveyor GF 12965-700-600 RA2076 Technical data: Conveyor length (NL): 12965 mm (3000 mm forerun + 6865 mm incline + 3100 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12965 Nominal / outs ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 3.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1.4 kg

Key data: 1020 mm, 3 mm

Specifications • Sheet thickness max. 3.0mm • Working width max. 1020mm • Bending angle max. 120° • Opening width of the upper beam max. 160mm • Description: suitable for prototypes • Power: Manual operation • Dimensions: 2300 x 1600 x 1500 mm • Weight: 760 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 5.3 kg

MBO K 800/6 S-KTLT with 2nd unit Age: 2006 Format: 780x1200 mm Equipment: Pallet Feeder K 800 - FP120 MBO Navigator Touchscreen Control Panel 6 buckles 1x Side buckle 2x knives 1x Side Buckle Electr. Double sheet control Anti Noise hood Slitter Shaft Cassette MWK Scoring, Perforating and Cutting devices for standard operations 2nd Folding Unit K 800.2-2-78/4 with double benefit device

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/125/H75 mm -Total weight: 5.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Three-roller calender brand MG 3000 x 200 mm. Year 2006

Reference ID: PP-58435 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 MATIC A4 Year Built: 1993 Impression: - Working Hours: - Condition: Good Location: Europe Availability: Immediately Machine Description: Machine Options: • Straight-line gluing • Straight-line upper gluing • Straight-line gluing + EUR lock • Crash lock / crash lock with partition • Special – conical construction Workable Materials: • Solid board • Flute N • Flute F • Flute E • Flute B Machine Equipment: • HHS Xtend2 gluing system • LNT 300 gluing check, 1x under wheel • PL500 gluing nozzles, 4 pieces • Prefolding tool for gluing flap • Under gluing wheels width: 5 mm and 10 mm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 20 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/80/H50 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1 kg

EGLI Model V1 Usage :Frozen Butter Bulk Shreader /cutter Condition : Good Location : Dairy Machinery UK

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H47 mm -Total weight: 1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H55 mm -Total weight: 2.1 kg

Component size: Length 1700 x Width 1050 x Height 1050 mm Printing method: The patented VFGF (Variable Fused Granulate Fabrication) technology is a further development of pellet 3D printing with variable nozzle opening. It prints in high resolution only where necessary, for example on visible surfaces, and efficiently fills inner areas with thicker webs. In this way, VFGF combines the advantages of FDM (Fused Desposition Modeling) for fine details and complex geometries with those of granulate printing (high application rates, material variety, lower costs). Intelligent algorithms ensure the right amount of material in the right place at all times, even for complex shapes with overhangs or support structures. Areas of application: For prototypes, individual parts, small series and also for higher quantities. By melting in a specially developed screw extruder, high throughputs ar ...

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

Condition: Very good condition

5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly