128,836 used machines on RESALE, but how to find them? Machine Search
Hacksaw Fortuna Mitre cuts Cable needs to be replaced. Length 1.20 m Height 1.00 m Width 0.60 m
4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg
Container conveyor system Knapp Over 650 meters Knapp conveyor system with 57 and 65 cm width, many special components, year of construction 2010 This very well-maintained conveyor system from Knapp serves 6 packing stations and 6 picking stations and offers the possibility of putting together any desired system of similar size. The components are diverse: • Pressure-free roller conveyors with pneumatics • Over 15 roller conveyor curves with flat belt and round belt drive • Some routes are suitable for transverse transport (conveyor width over 60 cm) • 2 Nerak conveyors with a lifting height of over 10 metres • Over 20 belt converters • Belt conveyors of various lengths • Packing tables and scales General conditions The system can be dismantled by the buyer. Or we offer dismantling. The system can be reconfigured together with us. The combinat ...
Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws -Chuck size: Ø 400 mm -Bolt circle: mm -Through hole: 102 mm -Total dimensions: Ø 400 x 125 mm -Weight: 90 kg
Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle, grinding spindle -Manufacturer: Fortuna, grinding spindle precision spindle -Type: 15.UJ60 64 110 -Dimensions: see photos -Total dimensions: Ø 60 x 455 mm -Weight: 6.7 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 36 mm -Shipping/Price: complete -Dimensions total: 145/220/H63 mm -Total weight: 12.3 kg
Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press
-Pizza oven 2 tiers -Manufacturer: Moretto Forni -Model: PD60.60 -400 volts -8.4 kW -Weight: 111 kg -currently 3 ovens with 2 shelves each available in the warehouse Year of construction: 2013, 2016 and 2018
P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...
Fortuna semi-automatic bread roll press size A4 Bakery condition Ball knob repaired with duct tape two press plates as good as new Knife in very good condition, as not used for sourdough absolutely neat and smooth running Video about test run and more pictures available
Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg
Baking floor Model Forno 246 Modular deck oven for trays 2 x 40/60 - 1 x 60/80 Program control with night start Stove dimensions inside: 650x800x210mm, WxDxH Stainless steel Temperature up to max. 300°C Connection 400V, 5.4 kW, 16A-CEE plug Dimensions: 985 x 1275 x 470 mm, WxDxH (floor) New device 24-month warranty on spare parts Water connection 3/4 inch, water drain DN 40 Option: Hood Mobile base frame with sheet metal tray You can find many more ovens here!
Baking floor Model Forno 446 Modular deck oven for trays 4 x 40/60 - 2 x 60/80 Program control with night start Stove dimensions inside: 1250x800x210mm, WxDxH Stainless steel Temperature up to max. 300°C Connection 400V, 8 kW, 16A-CEE plug Dimensions: 1555 x 1275 x 470 mm, WxDxH (floor) Weight 240 kg (floor) New device 24 months warranty Water connection 3/4 inch, water drain DN 40 Option: Hood Mobile base frame with sheet metal tray We have a wide range of deck ovens!
Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 1 piece available -Dimensions: 305/145/H400 mm -Weight: 5.4 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg
Year: 2016 - technically efficient, ready to work - after full service - spindle 2.2 kW - axis movement range: X – 2675 mm, Y – 355 mm, Z – 224 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 6 tools - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows 7 with online access - protective cabin - weight 1400 kg, dimensions: 3600 x 1660 x 1900 mm
workbench, work table, assembly bench -Width: 1250 mm -Depth: 700 mm -Height: 860 mm -Drawer: 1 -Weight: 75 kg
x-travel: 5000 mm y-travel: 2500 mm z-travel: 1500 mm Control: Typ Fidia C20/6H-SB total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use
Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Bolt circle: 172 mm -Weight: 90 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg
Key data: 1000 mm, 1 t
for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg
Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg
Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm
Key data: 800 mm, 1900 kg
A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!
Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec
Universal Machine Mixer Type 45 Bowl capacity approx. 45 litres with tilt function 180° Capacity approx. 10 to 180 litres/hour E-system NEW Connection 400V, 5.5 kW,16A-CEE plug Machine More blenders in stock!
FOOD-TECH/ E044/ 2016 Blanching machine for carrots etc. 20 tons/h used, sold as it is, where it is, price ex location used, sold as it is, where it is, price ex location
- Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure: 6 bar - Capacity : 30 – 120 hl/h - With semi-automatic cleaning - Dosing pump was replaced in 2017 - Machine in good condition Dimensions: - Length : 1800 mm - Width: 850 mm - Height: 2000 mm
diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0,1 m bore 75 mm KK 140 4 pcs. fastening screws 173 / M 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Professional meat mixer model SN25M is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require reliable operation, compact dimensions and high mixing quality in daily professional use. The 50 liter tub capacity allows processing of optimal product quantities, while the operating speed of 17 to 34 rpm ensures efficient and even mixing. The machine is suitable for preparing minced meat, cevap mixtures, sausages, burger mixtures and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. The powerful 1.5 kW motor provides stable performance and reliable operation even under intensive use. Compact dimensions allow easy placeme ...
Complete Vegetable Processing Line – Installed – Short Use – Inspection Possible. Complete vegetable processing line, currently still installed and available for inspection at any time. The line has been used for approximately 3 months only and was stopped due to a change in production. The system remains in place, allowing full on-site inspection. Dismantling and loading onto trucks can be carried out by the owner free of charge. Important: Slicer is NOT included No operational video available at this stage Layout and full photo documentation available The line is suitable for various vegetable processing applications depending on final configuration. echnical Data (Structure it like this) Condition: Used Operating time: Approx. 3 months Status: Installed Inspection: Possible anytime Dismantling: Included (FOC) Loading: Included Availability: Immediate Scope of ...
FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...
Bread roll system composed of: 4-row Fortuna head machine type Primus 4 Weight range 40-110gr, TOUCH control Stainless steel Kövy proofing room type KA-S with cutting and punching station with disinfection with deduction with humidification station - Bakery condition
maximum number of results exceeded
please refine your search
