flott 16 used for sale

Esterer BNK 160/R for prisms and round wood . snow-high 160mm built in 1990 roundwood task, block train, roller aisle with spreissel separator, roller aisle with drop.

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 1600-105 Nominal angle: 45 degrees Nominal briete / belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW Engine Condition: good Available: now Location: Camp Frankenberg

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping  ...

Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition

pallet trucks, ant pallet truck Brand: Jungheinrich Type: EJE-A 16G 20-115 Load capacity: 1600 kg Fork length: 115 cm Attention: without battery, but fully functional All information without guarantee

High-performance fine cone crusher Calibrator 1600/300 H III

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 36; Gross weight [kg]: 730; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

Key data: 160 KW, 200 kVA, 400 V

MODEL: EQ-D200160 ENGINE: Deutz BF6M1013FC G3 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 200(kVA) / 160(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2600kg DIMENSIONS L/W/HEIGHT (MM): 290012001600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry  ...

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

spindle diameter: 160 mm x-travel: 4000 mm y-travel: 2200 mm z-travel: 1500 mm : 270 mm spindle turning speed range: 20-2000 U/min Control: Heidenhain type: TNC530i table surface area: 3000x1600 mm table load: 40 t spindle taper ISO: 50 spindle motor: 50 kW T-slot - width: 28 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 60; Gross weight [kg]: 769; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Power [PS]: 272; Gross weight [kg]: 2035; Engine: Perkins 1506A-E88TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture: 2021, Connector size: 6 Perrot Cardan, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

; Power [PS]: 218; Gross weight [kg]: 1548; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

; Power [PS]: 179; Gross weight [kg]: 1434; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

; Power [PS]: 163; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 544; Gross weight [kg]: 3661; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 598; Gross weight [kg]: 3699; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 5938; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1494

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: ICEM 402 total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 15000 mm y-travel: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 489; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

Diameter over the bed 1600mm. Diameter over the slide is 1250mm. Workpiece diameter min, 320mm. Workpiece length 8000mm. Spindle bore 80 mm. The greatest total cutting force is 16 tons. The greatest weight of the workpiece, 40 tons. Power el. drive motor, 76 kW. Machine dimensions: 14520x2965x2330 mm. Machine weight, 61 t.

Centrifugal pump with magnetic coupling.

; Power [PS]: 326; Gross weight [kg]: 2110; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 359; Gross weight [kg]: 2261; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 239; Gross weight [kg]: 1533; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

Diosna Spiral Kneader Type: SP 160 AD extendable spiral kneader for a maximum of 160kg of dough or for a maximum of 100kg of flour with 2 timers Automatic switching on and off via clocks Stainless steel flour dust cover 2 speeds (gears) slow and fast Boiler locking via pliers operated with hydraulics suitable for almost all doughs robust and strong Trade-in, delivery and assembly on request Vat capacity 260 litres

; Gross weight [kg]: 385; Engine: Perkins 404A-22G; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

; Power [PS]: 2039; Gross weight [kg]: 11207; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger

; Power [PS]: 925; Gross weight [kg]: 5040; Engine: Perkins; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1702

Gas Engine Generator Set (CHP/BHKW) Waukesha 16V150LTD for natural gas Serial number 700036 Stamford generator P.I734C2 400V/231V50Hz, 1327 KVa 1785 Amp year 2009 Serial number C265013/1 Scope of delivery: - Generator set - Control panel - Gasline section as displayed

Vacuum pump manufactured by STERLING SIHI GMBH in 2002. DRYB 160016 GT model.

; Power [PS]: 54; Gross weight [kg]: 764; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Power [PS]: 2719; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

; Power [PS]: 2447; Gross weight [kg]: 12528; Engine: Perkins 4016-61TRG2; Accessories: Battery, Control Panel

; Gross weight [kg]: 7408; Engine: Perkins 4008-TAG2A; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location

; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger

; Power [PS]: 1496; Gross weight [kg]: 9119; Engine: Perkins 4012-46TWG2A; Accessories: Battery, Control Panel

; Gross weight [kg]: 10388; Engine: Perkins 4012-46TAG2A; Accessories: Battery, Control Panel