134,521 used machines on RESALE, but how to find them? Machine Search
Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel
with (wide) swivelling vertical head table size 300 x 1,430 mm table paths: laengs (X-axis) 1,000 mm persive (Z-axis) 520 mm quer (Y-axis) 360 mm installation height under fraes spindle approx. 500 mm Extension of the fraesspindle min./max. 350 mm spindle holder SK 40 spindle speeds 25 - 1,200 rpm feed/rapid speed 12-900 mm/min spindle drive approx. 3 kW Total drive 3.4 kW - 380 V - 50 Hz weight 2,400 as kg;
A-197 Varian X-ray tubes CE-No. 0086 perm. FILT. 0.7 AL / 75 kVP 150 KL. Focus 0.30 Gr. Focus 0.80 Price on request
Material: Stainless steel V2A Drive: 2,2 KW.
Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good
Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW
wire diameter range: 1,0 - 5,0 mm ring diameter range: 100 - 600 mm wire feeding length: max. 2.000 mm output: 10 - 120 pcs./min.; very good
working width: 2.000 mm number of line wires: max. 16 distance of cross wires: 6\", 12\", 18\", 24\" od. 36\" distance of length wires: 1/2\" to 1/2\" wire diam. length wire: 2,5 - 3,25 mm wire diam. edge wire: max. 4,0 mm wire diam. cross wire: max. 3,25 mm wire diam. knot wire: max. 3,25 mm; ready for operation
wire diameter range: 1,8 -9,0 mm number of kalibers: 13; verry good
Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min. machine has been completely repainted; very good
wire diameter range: 1,0 - 4,0 mm cutting length: up to 2.000 mm wire feeding speed: 5 - 90 mtr./min; ready for operation
TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...
wire diameter range: 1,0 - 5,0 mm ringdiameter: 80 - 600 (1.000 mm) wire feeding length: max. 10.000 mm output: 12 - 30 rings/min welding capacity: 10 kVA; ready for operation
Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails
ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...
Connection - 380 V, 50 Hz, control voltage 24 V, output at 100% ED 3.5 kVA, Btto 235 kg, more tech. Info from nameplate
CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...
24 months warranty TOP value for money Solid, movable baguette long roller, mounted on a mobile frame with caps lock wheels Capacity: 50 g - 1200 g, 1200 pieces per hour Roll width: up to 75 cm on retractable felt rolling belt Mechanical adjustment of Ausroll properties Dimensions in cm: 105 x 69 x 153 (WxDxH) Height of the machine without frame: approx. 70 cm, Engine power: 0.55 kW 380V - 3Ph - 50 Hz - 16A-CEE connector Weight: 258 kg Price incl. mobile base --- Alternative as stainless steel model: SM-380S (machine completely in stainless steel): Price: 5.220,-- incl. mobile frame
Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION
24 months warranty Solid, movable stainless steel baguette long roller, mounted on a stainless steel frame with caps lock wheels Capacity: 50-1200 grams, 1200 pieces per hour Roll width: up to 75 cm on retractable felt rolling belt Mechanical adjustment of Ausroll properties Dimensions in cm: 97 x 68 x 155 (WxDxH) Height of the machine without frame: 70 cm, Engine power: 0,37 kW 380V - 3Ph - 50 Hz - 16A-CEE connector Weight: 250 kg Price without mobile base (table model): 4.890,-- net
Compact and fast strapping machine with maximum package dimensions of approx. width 600 x height 600 mm from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Closure type: Welding using the hot wedge method. -Up to approx. 48 straps per minute. -Tape type: PP tape. -Bandwidth 5-9 mm adjustable: Set to 5 mm. -Belt tension adjustable on the operating terminal. -Soft tension possible. -Standby function/power saving mode. -Stable foot pedal. -Low-maintenance and low-wear belt frame. -Sliding and lockable via castors. The machine can be demonstrated under electricity.
calibrating sanding machine SCM SANDYA 16S - 135 second hand machine carpet in rubber max. working width mm. 1350 machine composed by 2 belts : 1° belt : roller in rubber diam. mm.200 . shore 80 2° belt : combined roller in rubber diam. mm.160 . shore 35 + electronic pad belts size mm. 2620 x 1370 motor power Hp 20 volt. 380/50
Complete control CC 90 for ENGEL injection moulding machines
2 sit-top rotary plate machines EUBAMA S 20/10, loading magazine IEMCA TS 560, KNOLL spaenefoererer with hydraulics, linear foerderer with screw unit WEBER, and much more; see pictures
High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.
Round-hareming machine series No. 6577, Birmingham / England Weight approx. 2 t
Semi-automatic short-threaded cutting machine for the production of external and internal thread Gr. via cross slide: 160 mm Gr. via cross slide guide: 240 mm tip wiete 250 mm nSpindle=180-2240 rpm spindle bore: 61 mm gr. threaded length/deep 100/6 mm
5-fold combined dressing and thicknessing machine, circular saw, milling machine and Slotted Hole Drilling Machine Frommia Type 261 UB Dressing, joining and thicknessing planers Planing width approx. 410 mm Planing thickness approx. 1- 185 mm Dressing table length approx. 1550 mm Thickness table length approx. 700 mm Knife shaft diameter 100 mm with 2 knives Speed of the knife shaft approx. 5200 rpm. 4 feed speeds approx. 5, 9, 12, 18 m/min. Motor approx. 4 kW Drill Drilling depth approx. 120 mm Slot length approx. 200 mm Height adjustment approx. 80 mm Table size approx. 180 x 320 mm Circular saw and milling combination Table size approx. 800 x 600 mm Diameter of saw blades 150 – 300 mm Max. cutting height approx. 95 mm Diameter of the saw shaft at the clamping part 20 mm Speed of the circular saw shaft approx. 3600 rpm. Motor power approx. 1.5 or 2.2 kW ...
Drilling and threaded spindles, with FIBRO round board approx. 800 mm, See pictures
Single-chamber washing machine with rotary basket
Punching and forming center in chain with an assembly line for the production of relays, see pictures
High quality machine housing, 548 x 129 x 200cm hoch, KMS, mint condition -90% Special price ! If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. The parts have minor signs of disassembly. High quality machine enclosure, length 5480, width 1285, height 2000mm, Consisting of: - Total 12.24 running metres of enclosure, - High quality frame with removable panels, all top painted, - 2 large double doors without locking system with plexiglass, - The back consists of 7 removable elements of plexiglass and sheet metal - The top is made of plexiglass all round - The roof consists of slide-on frames with plexiglass edging. - The elements are all very strong and of high quality - Incl. the many machine feet and the ...
Gernep labelling machine type Labetta 4 / 3 / 10 640 A year of manufacturing: 2013 capacity: 7.500 bph work direction: right to left rotation: clockwise Stainless steel bottom frame instead off standard carbon steel bottom frame Format parts for: - 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. - 2 different front label format parts 33 cl longneck; - 75 cl Bierre Belge bottle Corked; Neck, front and back label. Air driven glue pumps replaced by electrical driven glue pumps. Introduction wraparound labeler 2020, less wet glue labels since then. Incidental residual wet glue labels ran still May 2022 (remaining stocks) - machine conserved. Machine still in bottle line for conveyor use only, but stilll able to run. The machine is still in production until the mid of November 2023
with NC round table WALTER 1000 mm, see pictures
16 stations, max. 12 mm , reel, ring straightener, Knoll scratch tape foerderer, various hoistand and spare parts
Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...
maximum number of results exceeded
please refine your search
