flash pasteur used for sale

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1000 l/h power heating heater / oil boiler 90 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 430 kg Oil consumption 10 kg/hr ; New machine - best condition

Used plate pasteurizer made by Gea, type 161. New 1986. Max. pressure 4 Bar, max. working temperature 100 ° C, volume 209 L, extension 881-938 mm. Capacity 7550 kg / h.

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1500 l/h power heating heater / oil boiler 140 kW Electrical power 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm weight 500 / 600 kg Gas consumption flu vinegar gas 11 kg/hr Gas consumption natural gas 15 m3/hr. ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 2000 l/h power heating heater / oil boiler 180 kW Electrical power 1.8 kW Electrical connection 230V 5 0Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm Weight 492 / 600 kg Oil consumption 19 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 500 l/h power heating heater / oil boiler 45 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Gas consumption flu vinegar gas 4 kg/hr Gas consumption natural gas 5 m3/hr. ; New machine - best condition

Rated power: up to 400 l/h (80C pasteurtemp., 10C input temp. Juice) Thermal power: approx. 35 kW Electrical power: 1.4 kW Electrical connection: 230V 50Hz (1 phase) Electrical fuse: 16 A Laenge: 910 mm Width: 960 mm Height: 1850 mm weightweight (heating circuit emptied):260 kg weight (heating circuit filled): 360 kg Heating heater consumption: approx. 3.5 liters/h exhaust gas connection: 150mm Max. Exhaust temperature: 180C sound power level (LW, A): 83dB; New machine - top condition

Reversible tunnel pasteurizer capacity up to 2.500 bph/cph 500 ml For beer, CSD, and juice

Used pasteuriser by APV model N35. New 2005. Capacity 10246 kg/h. Heat exchange surface 54.6 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.9.

Used pasteuriser by APV model N35. New 2004. Capacity 10000 l/h. Heat exchange surface 56.35 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.

Corema Euromix120 Pasteurizer Serial: 1150 2006, The Euromix120 Pasteurizers for variable mix quantities use a special thermoconducter liquid. The pasteurization cycle is always rapid (less than 2mins) and times vary to the quantity of mix, mix per cycle 15 - 120l, mobile, 3Ph

Pasteurizer PA500-RWT-Gas Used Subject to prior sale!

Voran Pasteurizer 500l/h Gas Used Subject to prior sale!

Pasteurizer KHS type Innopas capacity: approx. 25.000 bph with 8 pasteurizing zones working area: 113,5 m² inlet temperature: 15°C outlet temperature: ± 38°C max. pasteurization temperature: 75°C fresh water temperature: 15°C pasteurization time complete: 48,5 min. - warming time: 21,2 min - pasteurization time: 12,3 min. - back cooling time: 15,0 min. including Siemens touch panel and Siemens S 5 PLC dimensions of the pasteurizer: width: 4.210 mm length: 21.000 mm height: 2.750 mm weight netto: approx. 27.500 kgs The pasteurizer is out of production since May 2024 technical details: see pdf document already dismantled and on our stock / Germany very good condition

Tunnel pasteurizer, Sander Hansen Krones, double deck, year of construction: 1995, usable area approx. 120 m², for cans & glass, Siemens S7, with cooling tank, still in operation. Tunnel pasteuriser pasteurizer, Sandern Hansen Krones, double deck level, Year: 1995, Net Space approx. 120 m², cor cans and glass bottles, Siemens S7, with cooling tower, still in production.

a pasteurization unit with pouch packer for liquid product Find more here - /

Milk E-Heating System PHE, Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump., Make: DMUK, Capacity: 1000-1000 L/h, Temperatures: Regulated by the controls, Circulation Pump: Included, Control Panel: Included, VDF: Included, Condition: Excellent

We also build new inexpensive chamber pasteurizers - for 1 – 8 pallets - for beverages with and without CO2 - With hinged door or lifting door - Completely in stainless steel frame design - Stable assembly systems with hygiene concept - Only approx. 2.75 kW per blower motor Please feel free to contact us!

The pasteurizer was used for vacuum-packed pre-cooked sausages,, Inlet temperature: 10°C, Pasteurization temperature: 85°C, Final temperature: 1°C,, Heat energy requirement: 0.26 kg steam / kg product - Connected load: 549 kg / h, Cooling energy requirement: specific power consumption 50 watts / kg product, connected load cooling: 337 kW,, Total electrical connection value: 70 kW, for main drive (3 kW), 2 pumps (37 kW), 4 fans (20 kW), exhaust fan (3 kW), belts (3 kW), glycol pump (4 kW), power: 1,600 kg / h (including brine)

The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant:, - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients., - Capacity: With a processing capability of 1000 liters per hour, its suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly., - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently., - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the relia ...

The HTST (High-Temperature Short-Time) pasteuriser from Dairy Machinery UK is designed to provide efficient pasteurization of liquid dairy products while preserving their quality and safety. Here are some key features:, - Process Efficiency: HTST pasteurisation involves heating the dairy product to a high temperature (typically around 72°C and other temperatures on request ) for a short time (15-30 seconds and other timings on request ), which kills harmful bacteria and extends shelf life., - Quality Preservation: This method retains the taste and nutritional value of the dairy products better than traditional pasteurization methods, minimizing the impact on flavor and color., - Automated Control: Many HTST systems come with automated controls that monitor temperatures and flow rates, ensuring consistent pasteurisation and reducing human error., - Compliance Standards: Designed to meet  ...

An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling wate ...

The Fischer milk pasteuriser 5000 is an industrial-grade machine designed for pasteurizing milk on a large scale. Here are some details about such a pasteuriser:, - Capacity: The 5000 typically indicates that this pasteuriser can handle up to 5000 litres of milk per batch, making it suitable for large dairy processing operations., - Functionality: The pasteuriser is designed to heat milk to a specific temperature, holding it there for a required amount of time to eliminate harmful bacteria and pathogens while preserving the milks quality and nutritional value., - Construction: Fischer machines are commonly made from stainless steel, ensuring hygiene and durability. The materials used are designed to withstand high temperatures and pressures encountered during the pasteurization process., - Design: It often features an insulated design for energy efficiency and may include a user-friendly ...

New Batch Pasteurisers custom made on request., Dairy Machinery UK offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Ceam Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume Capabilities (Litres): 200 , Control Panel: Stainless steel Control box,  ...

The ROTOTEMP 1,5 is a scraped surface heat exchanger for cooling or heating various products, with a heat exchange surface of 1,5 m2. The heat exchanger consists of a jacketed outside cylinder and a jacketed internal cylinder. The outside jacket is insulated and finished with stainless steel sheeting. The product space is located between the two cylinders. A rotating cage with scrapers is fitted in the product space. The scrapers ensure proper mixing during the tempering process. Because the cylinders are scraped continuously, it is possible to cool crystallizing products without a product layer building on the walls. It is also possible to heat products without the danger of sticking to the walls. Thanks to these characteristics and the design of the installation, it is also possible to accurately perform heat exchange processes for products with high viscosity., Technical specification ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 300, Control panel: Stainless steel Control box, Controls, Thermomete ...

2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter

Pasteuriser and Operating Panel Manufactured by APV Consisting of APV heat exchanger, holding tubes, pump and control panel with chart disc recording Output 200 BBL/320HL Complete with: 30BBL/49HL sterile beer tank Side entry manway Insulated and clad in stainless steel 2BBL/300 litre sterilising tank This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Used Used Complete Canning Line KHS 25.000 cph: Year: 2017 Condition: Good Used Complete Canning Line KHS 25.000 cph: Capacity: 25.000 cph Products: beer and carbonated soft drinks Format: 500ml; 211/202 Yom: 2012, 2017 Current condition: still installed ? power on the machine. Can be inspected in dry cycle. Available for dismantling: november 2025. The cans will be packed in tray with foil. Composed of: Bulk can depalletizer: linker dpg-500, yom: 2012 Canceck: transtechhysek, yom: 2012 Can conveyor: linker conveyor rc/khs, yom: 2012 Rinser: linker triplex rinser tr/khs, yom: 2012 Flush pasteurizer: khs innopro 140/14/85, yom: 2012 Filler: khs innofill can dvd, yom: 2017 Seamer: ferrum f08, yom: 2012 Lid feeder: nsm lidservera30, yom: 2017 Conveyor: khs innoline btr, yom: 2012 Filling height control: khs innocheck cub, yom: 2012 Blowing: europool Packing machine: khs kisters sp0502, yom: ...

In the steam chamber pasteurizer, bottles can be pasteurized in crates on pallets with hot steam. The parameters for the temperature rise and the holding time of the set pasteurization temperature can be set as desired. Condition: in working order, well-maintained Nominal capacity (1 l bottles): 480 bottles/h Electr. Power: 4.00 kW Connected loads: 400 V / 16 A / 50 Hz / 5-Ph Steam connection: 3/4 inch Compressed air connection: 6 bar Machine dimensions (WxDxH): 1400 x 2000 x 2700 mm Weight: 700 kg

Sprinkler pasteurizer,, Usable length: approx. 13,500 mm,, Usable width: approx. 2,000 mm,, with heat exchanger,, with fan in the outlet,, power: approx. 3,500 glasses / hour, detección automática de velocidad de transmisión: approx. 3,500 glasses / hour

Unused Endress+Hauser Smartec CLD18 Conductivity measuring system., Order code: CLD18-1457/0, Firmware version: 02.00.09, Measuring range: 200uS/cm - 1.000 mS/cm, Temperature: -10 ... 110°C, Pressure: 13 bar, Type of Machine: Conductivity measuring system

Terlet Terlotherm T0-4 Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 32 liter. Number of scraper rows: 4. Inner vessel: 0 / 10 Bar - 0 / 150 °C - 32 liter. Jacket #1: -1 / 4 Bar - 0 / 150 °C - 2,6 liter. Jacket #2: -1 / 4 Bar - 0 / 150 °C - 4,6 liter. Motor: 3 kW - n1: 1.456 rpm - i: 43,33 - n2: 34 rpm - 380/400 V - 50 Hz - 6,60 / 3,85 A. Product inlet: 50 mm. Product outlet: 50 mm. Ground clearance: ± 556 mm. Cy ...

Cream Cooker & Cream Pasteurizer Refrigeration RudiCooking and Reverse Cooling BoilerProduct descriptionManufacturer : Refrigeration RudiType : Past RD 160Year of construction : 20111Defective. We have connected, unfortunately does not work. We don't know what is defective. Ideal for the Cooking, Cook & Serve, Cook & Cook & Hold applications, the proven Kälte-Ru-di cooking kettles are suitable.As an alternative to Cooking, Cook &, Serve and Cook & Hold, the use of the Cook & Cook Kettle is currently becoming increasingly important in the production processes in bakeries, confectioneries, kitchens, communal catering, etc.

The ITT Jabsco Pureflo Lobe 24250-4310 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,936 liter per revolution. Maximum nominal capacity: 39,9 m3/h. Inlet connection: 3 RJT. Outlet connection: 3 RJT. Maximum product pressure: 6 bar Maximum pump speed: 700 rpm. Maximum temperature: 110 °C. Previous used in a Casein plant. The current motor with this pump is 7,5 kW - 1.450 rpm - 400 V - 50 Hz - 14,3 A.  ...

HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1 inlet and outlet pipes which also act as a CIP loop., The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE ., Volume capabilities (litres): 500 , Balance Tank: Included , PHE Temperatures: 4-45-55-65-72-4, Outlets: Separator and Homogeniser Outlets , Divert Valve: Included , Dimensions in cm : 160 x 80 x 200, Product Pump: Included, Hot Water Pump: Included , Comtrols: HMI Touch Screen , CIP: Program incl ...

Complete Mini Dairy Line – Seital 05X Separator + Malldison 1,000 L/h Self‑Heated Pasteuriser + Fords Little Gem 6/2 Glass Pint Bottle Filler, Ideal for: Small dairies, farm bottling, cream production, test plants and product development. Line is designed for approx. 1,000 L/h milk processing into glass pint bottles., 1) Seital 05X Cream Separator, • Make/Model: Seital 05X disk‑stack centrifuge, • Application: Milk clarification / cream separation, • Typical capacity: up to approx. 1,000 L/h (depending on product and setup), • Construction: Stainless steel product contact parts, • Features:, • Designed for continuous operation in dairy service, • Compact footprint – suitable for small plants/farm dairies, • Complete with bowl, drive and base frame, • Condition: Used, in good overall condition; available for inspection, • Suitable for: Whole milk separation int ...

HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1 inlet and outlet pipes which also act as a CIP loop., The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE ., Machines that Can Be added with on extra sale are the below :, 1) SEPARATOR, Specifications Manufacturer :Seital/SPX, Model :SE05, Condition : Used, Stock Number:834, Manufacture:Seital, Capacity : 1200 L/h, Cleaning : Manual Cleaning, Tools : Included, Manual Book : Included, Base Frame : Include ...

Stephan Terlotherm TD100 Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 37 liter. Number of scraper rows: 4. Number of scrapers per row: 4. Total number of scrapers: 16. Inner vessel: 0 / 10 Bar - -20 / +165 °C - 37 liter. Jacket #1: -1 / 6 Bar - -20 / +165 °C - 2,9 liter. Jacket #2: -1 / 6 Bar - -20 / +165 °C - 4,7 liter. Motor: 3 kW - n1: 1.456 rpm - n2: 41 rpm - 380/400 V - 50 Hz - 6,60 A. Heat exchange surface  ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 100 , Control panel: Stainless steel Control box, Controls, Thermomet ...

Maschinen- und Apparatebau Ten Brink pasteurizer, s/s belt width: 2650 mm, total dimensions: approximately 37500 mm x 3500 mm x 3300 mm. Including in- and outfeed conveyors and switch cabinets.

Chamber pasteurizer for pasteurizing bottled beverages. The machine can accommodate up to 9 pallets at a time. Pressing the start button causes the door to close automatically and the chamber pasteurizer to start the program previously set via the visualization system. Once the program has run its course, the door opens automatically. Manual operation with manual control of the actuators is also possible., Additional title: for simultaneous pasteurization of up to 9 pallets, Max. load: 9 pallets, Voltage: 380 V, Frequency: 50 Hz, Material: stainless steel housing, Base construction: standing on feet, Features: pasteurization chamber, pallet conveyor, blower, extraction system, control system, and visualization

Hoegger pasteurizer, type: 05-323-146-457, serial number: 05-323, year of construction: 2000, 400 V, 3 Ph, 50 Hz, total full load current: 93 A, total full load power: 48 kW, weight: 25000 kg, infeed height: 2350 mm, outfeed height: 2850 mm, total dimensions: 11100 mm x 3060 mm x 4300 mm, including switch cabinet, dimensions: 1400 mm x 700 mm x 2100 mm.

Chamber pasteuriser for extending the shelf life of bottled drinks. Steam is supplied externally and fed into the pasteurisation chamber for heating., Additional title: with one pallet bay, Length: 1,7 m, Width: 1,7 m, Height: 2,7 m, Weight: 2 t, Material: stainless steel

Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized ...

Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: Inc ...

Used Flow Pasteurizer with separator 2000 L/h Structure and Operating Principle The Used Flow Pasteurizer with separator 2000 L/h operates as a continuous flow pasteurizer with a plate heat exchanger, designed specifically for the thermal processing of milk and cream. The system uses a plate heat exchanger to ensure efficient heat transfer, enabling rapid product heating and cooling. As a result, it maintains product quality while maximizing energy efficiency. Moreover, the continuous operation delivers a consistent throughput of 2,000 liters per hour. Therefore, this model suits medium-scale facilities that demand precise thermal treatment and high microbiological safety standards. Construction Features and Manufacturer Jedinstvo, a Croatian manufacturer, built the Used Flow Pasteurizer with separator 2000 L/h in 1998 under model number 43.107072. At present, the machine remains dismant ...

Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,30 ...

Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization le ...