finn used for sale

Large Format 3000 x 1500mm With Automation Siemens 840

Combination laser punching FINN POWER LB6 Year 2003 3000x1500

30 ton 1250 x 2500mm

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

Punching machine X5 Manufacturer: FINNPOWER YEAR: 2006 Desktop... 2530x1270mm Nominal pressing force... 056 Axis X ... 2584mm Axis Y ... 1317mm thickness of the cut material ... 8mm Magazine slots ... 20 Control Fanuc ... Oi-PC Machine weight ... 10500kg L x W x H ... 7600x6980mm The machine is in good condition, possible to test under power.

Used machine in good condition. Available for immediate delivery. - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 9.000 - Number of turret stations (pcs): n/a - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

- Excellent condition. Always maintained with Official Prima Power Service. - Only 51.849 working hours. - Full maintenance in 2023, including new Shear Blades in 2023 - SG6 Series 12. - Warranty start in 2006. - TU6 tapping. - Forming System. - 4

FINN-POWER SG-6 turret punch press was built in 1999 in Finland by LILLBACKA CORPORATION. The machine has been regularly serviced throughout its service life. The FINN-POWER Shear Genius SG6 was created as an answer to the daily challenges of modern business. This system is designed for precision punching, stamping and cutting of sheet metal with a maximum length of 3061 mm and a width of 1528 mm. The integration of all the necessary equipment in a single place enables significant reductions in production costs as well as overall working time. All machining processes are performed fully automatically, in a single work cycle. The loading system separates a single sheet from the stack and fixes it in pneumatic clamps. The holes are punched by means of reliable tools taken from the 20-station turret. Parameters such as stroke depth, stroke length and stroke speed can be fully adapted  ...

FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...

Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

FINN POWER combined laser Mod. LPE5 CO2 laser power 2500 W Turret 20 stations including 1D index-1D index/forming. 2B index-1B index/forming. 8B normal. 1C index-1C index/forming-2C normal.1MT6-A. 1MT24-8 Working field 3000x1500 Year 2004 Rofin DC025

Including - Loading and Unloading - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 9.000 - Number of turret stations (pcs): 20 (D 2x Index, B, 10x, 6 6X (2x Index) - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

9 inch cutting lense Retractable clamps (4) VPN Teleservice - Laser Type: FP4000 3.x - Working area (X x Y x Z): 3.048 x 1.524 mm - Max. workpiece weight: 800 kg - Positioning speed X/Y: 300 m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 12 mm - Maximum material thickness aluminium: 8 mm - Control: Siemens 840 D - Machine ON Working hours: 40.941 h - Beam ON Working hours: 21.798 h - Power: installed max: 15 kW - Weight: 24.500 kg - Dimensions (long x wide x high): 9.503 x 2.560 x 2.672 mm

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

- Turret with 20 station (two Multi-Tool stations) - UP Forming option. - Operating hours: 21.500 - Number of turret stations (pcs): 20 (2x Index) - Number of turret stations (pcs): 20 - Working area max: 3.000 x 1.500 mm - Punching force: 300 kN

Includes:- Night Train automatic warehouse - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: n/a - Number of turret stations (pcs): 20 - Turret rotation: 30 r/min - Axis speed [X axis] max: 80 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 270 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 5 mm - Oil tank capacity: 330 l - Material thickness stainless steel max: 3 mm - Weight: 24.000 kg

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A  ...

I sell various belt conveyors suitable for industry, for example in wood industry or material manipulation, etc. Belt width 1350mm Lengths 1000-1500-2500-3000-4000mm. All fully fit for work. Available the same.

Used machine in good condition. Available for immediate delivery. - Working area punching / laser (X x Y): 2.530 x 1.270 mm - Max. workpiece weight: 200 kg - Punching force: 200 kN - Maximum material thickness mild steel laser: 8 mm - Control: Siemens 840 D - Material thickness aluminium max: 8 mm - Material thickness stainless steel max: 8 mm - Laser Type: CO2 - Number of turret stations (pcs): 20 - Dimensions (long x wide x high): 6.700 x 8.000 x 2.600 mm - Weight: 17.000 kg

Used machine in good condition. Available for immediate delivery. - Max. workpiece weight: 10.500 kg - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Power supply: 15 kVA - Turret rotation: 24 r/min - Compressed air pressure min: 6 bar - Control type: SIEMENS SINUMERIK 840D - Axis speed [X axis] max: 90 m/min - Number of turret stations (pcs): 20 - Operating hours: 45.248 - Punching force: 200 kN - Working area max: 2.530 x 1.270 mm - Material thickness max: 8 mm - Compressed air consumption max: 5 l/s

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg

Roller transport Finnrose 3410 mm - Manufacturer Finnrose - Working width 1,400 mm - Roll diameter 65 mm - Roll pitch 100 mm - All wheels with rubber surface - Feed infinitely variable via handwheel - Feed speed approx. 2 - 8 m/min - Length 3,410 mm - Volts, Hz 400 V / 50 HZ - Location, at the warehouse D-32825 Blomberg

Manufacturer: Finnrose, Type: Transportband, Year: 1990, Working length mm: 4500, Working widht mm: 1300, Total hight mm: 950, Engine power kW: 1,2, Feeding speed max m/min: 2,5-10, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :1990

Manufacturer: Finnrose, Type: Finnrose, Year: ca.1992, Working widht mm: 1350, Total hight mm: 950, Adjustable: yes, Rollenteilung mm: 100, Rollendurchmesser: 60, Driven: yes, Working widht mm: 1350, Conveyor speed m/min: 5-25, Drive power kW: 0,5, Year :ca.1992

Manufacturer: Finnrose, Year: 1980, Total hight mm: 940, Adjustable: yes, Rollenteilung mm: ca.150, Rollendurchmesser: 80, Length mm: 2600, Width total mm: 1600, Drive power kW: 0,75, Wight approx. kg: 400, Year :1980

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - / Contact us at -

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - / Contact us at -

Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.

gebr. CNC punching press Finn-Power, type F6 SV, year 2005 Press force: 300kN Max. workpiece width: 4061mm Max. workpiece length: 1528mm Max. workpiece thickness: 8mm Max. workpiece weight: 200kg Fast feed X/Y: 80m/min/60m/min Tower head seats: 20 Tower head speed: 30rpm Travel speed: 100m/min Oil tank capacity: 330l Max. operating pressure: 300bar Dimensions X/Y/Z: approx. 5900mm, 6300mm, 2500mm Weight: approx. 13500kg Control: Siemens Sinumerik 840D Table of the machine has been extended. (Without machine housing)

Used GEA Finnah model 2209.014 cheese production and packaging machine. New: 2000. Maximum capacity: 8x28x60 = 13,440 cph (28-30 staples/min) Capacity: 150 g (120 g, 200 g) Product: cream, homogenised cheese Filling: aseptic Voltage 230/360 V 50 Hz Pressure 8 bar

00905 Designation of the scissors system Manufacturer: Finnpower Model SG6 12.13 Year of construction 2008 Operating hours: (as of Feb 2026) 42,340 h Power on time 6462131min Running time 2540410min Alarm time 2187771min Control Finnpower ICP1 Machine weight 28,000 kg Punching force 300 kN Cutting force 250 kN Max. operating pressure 300 bar Note: Tapping unit without function The SG6 turbine is currently connected to an LP6 Finnpower plant. The SG6 is converted into a stand-alone machine. So that the SG6 can also work independently on its own. The SG6 scissors are also currently connected to a Night Train storage system together with the LP6. (the LP6 layout and Night Train storage system will be dismantled on March 30, 2026) SG6 12 13 3 x 400 V 50 Hz 3 x 80 A Lcu 25 kA Condition Good condition Dismantling March 30, 2026

This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information.

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...

This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information.

Machine Type: Ultrasonic Cleaning Device Make: Finnsonic Type: MC-360/III Year of Make: 2002

This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details.

Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine

Manufacturer: Finn-Power OY, Kauhava, Finland Model: F6 SV Year of manufacture: 2005 Machine weight: 13500 kg Operating hours: approximately 66,603 hours Note: housing is not included in the purchase Technical Data - Punching force: 30 t (300 kN) - Maximum workpiece size (L x W): 4061 x 1528 mm - Maximum workpiece thickness: 8 mm - Maximum workpiece weight: 200 kg - Rapid traverse X axis: 80 m/min - Rapid traverse Y axis: 60 m/min - Number of turret stations: 20 - Turret rotation speed: 30 rpm - Tool type: thick turret - Maximum tool diameter: 89 mm - Tool change time: 1 to 3 seconds - Maximum CNC rotating tool diameter: 89 mm - Maximum CNC rotating tool speed: 58 rpm - Maximum travel speed: 100 m/min - Drilling accuracy: 0.1 mm - Positioning accuracy: 0.08 mm - Power supply: 47 kVA - Average power consumption: 24 kW - Oil tank capacity: 330 l - Maximum operating pressure: 300 bar ...

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet