filling lines used for sale

Used Used Complete Bottling Line KHS 43.000 bph: Year: 2008 Condition: Good Used Complete Bottling Line KHS: Product: Still Water Speed: 43.000 BPH Year: 2008 Cap Corvaglia 29/26 Tanner Preform Hopper Preform Elevator Preform Orientator Blower PET: Model: Blowmax 24 Compressor AF Chiller Riedel CIP KHS Filling Monoblock KHS Innofill-NV PET Filler: 60 valves ? mechanical Type of filling: gravity Capper (including elevator and cap orientator) Type of workable cap: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labelelr PE Year: 2021 Model: Simple cut flex CI 1120 30 Direction of rotation: counterclockwise 30 Electronic cam plates roll feed station Ispettore bottiglie Conveyor belts Shrink Wrapper Douglas Year: 2007 Model: m-75 Version: film launch Palletizer Alvey 880 Year: 1999 Type: Push System Pallet Storage Pallet Wrapper Lantech Model: S1500 Type of w ...

Used Used Complete Bottling Line KHS 32.000 bph: Year: 2009 Condition: Good Used Complete Bottling Line KHS: Product: Still Water Speed: 32.000 BPH Year: 2009 Cap Corvaglia 29/26 Hopper Preform Preform Elevator Preform Orientator Blower PET KHS Model: Blowmax 16S Series IV Compressor Chiller Filling Monoblock: Filler 50 mechanical valves Type of filling: gravity Capper including elevator and orientator Type of workable cap: pre-threaded plastic Cap size: Corvaglia 29/26 Distribution system: pick & place Labeller PE 1 roll fed station Mechanical cam plates Bottle inspector Shrink Wrapper Version: film launch Bundle 6?4 Palletizer Alvey 881 Type: push system Pallet Storage Pallet Wrapper Lantech Model: S1500 Type of wrapping: Rotating arm Pre-stretch Code: NP 695 More details: https://bottlingscout.com

Used Used 2009 Complete Bottling Line PET KHS 72.000 bph: Year: 2009 Condition: Good Used 2009 Complete Bottling Line PET KHS: Product: Still Water Speed: 72.000 BPH on 0.5 l Year: 2009 Cap Corvaglia 29/26 Tanner Preform Hopper Triblock KHS Preform Elevator Preform Orientator Blower PET: Model: Blowmax 36S Series IV Compressor AF Chiller Riedel CIP KHS Filler: 100 valves ? mechanical Type of filling: Gravity Capper (including elevator and cap orientator) Type of workable cap: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labeller PE Model: Simple cut KS177 Direction of rotation: counterclockwise Electronic cam plates stazione roll feed Bottle inspector Presco Model: intellispec Conveyor belts KHS Shrink Wrapper KHS Model: Innopack Kisters TSP Version: film launch Palletizer Alvey 942 Type: push Pallet storage Pallet wrapper Lantech Model: S1500 Type of  ...

Used Used Complete Bottling Line Sidel 2009: Year: 2009 Condition: Good Used Complete Bottling Line Sidel: Product: Natural water Speed: 45.000 bph Depalletizer Simonazzi Model: SWEEP-OFF-B Year: 2009 Speed: 55.000 bph Type: Push system Pallet Storage Interlayer remove system Saturator Simonazzi Model: CARBOGEA Year: 2008 Speed: 9.800 litri.ora Filling Monoblock Simonazzi Modello: EUROTRONIC Rinser 84 clamps Single treatment: Water Filler 84 valves Type of filling: isobaric Type of valves: mechanical Capper: ? 24 heads crown ?26mm Bottle inspector Heuft Model: HBBVXTXXX Year: 2011 Detect caps, Fill level Labeller SIMONAZZI Model: ALFA TOP BRAIN Number of heads: 32 1 cold glue stations Applicable label types: Front label. Label inspector HEUFT Shrink Wrapper SMI Model: SK802F Speed: 52.000 bph Type: Only film Double lane 3?2 Shrink Wrapper SMI Multypack Model: SK450F 24 pieces (4?6) Palle ...

Used Used Complete Bottling Line Sidel 46.000 bph: Year: 2005 Condition: Good Complete Bottling Line Sidel for glass bottles: Product: Mineral Water Speed: 46.000 bph Depalletizer Simonazzi Model: SWEEP-OFF-B Year: 2005 Type: with Layer Interlayer remove system Pallet Storage Saturator Simonazzi Model: CARBOGEA Speed: 9.800 lph Filling Monoblock Simonazzi Model: EUROSTAR 2000 Rinser 84 clamps Fixed nozzle Type of treatment: Water Filler 84 valves Type of filling: Isobaric Valve Type: Mechanical 2 Cappers: ? 24 heads crown cap ? 26 ? 24 heads for aluminium screw cap Bottle inspector Heuft Model: HBBVXTXXX Year: 2011 Level cap check Labeller SIMONAZZI Model: ALFA TOP BRAIN 32 heads 3 Cold glue stations Type of applicable labels: ? Front ? Back ? Collar Label inspector ABULL Model: STRATEC ? F300 Shrink Wrapper SMI Model: SK800F Version: Film launch Type: Only film Double lane for bundles 3 ...

Used Used Complete PET Bottling Line Sidel Soft Drinks 13.500 bph: Year: 2010 Condition: Good Used Complete PET Bottling Line: Product: carbonated water and drinks Speed: 13.500 BPH PET Preform Presses Sameto Model: EBH 2050 Year: 2010 PET Blower Sidel Model: SBO10 Size of neck: fi28 1881 Number of molds: 10 Air conveyor Alsim Year: 1999 Monoblock Alsim Model: Asmojet 1T RV-P 48/60/10K Rinser 48 clamps 1 treatment with water Filler 60 valves Filling type: isobaric Capper 10 heads Mixer Alsim Hourly output: 30 pph Bottle dryer ACI Year of construction: 2015 Labeler Krones Contiroll Model: Contiroll Year of construction: 2004 Labeler type: rotary Number of plates: 15 Pet wrap around label Labeling station type: roll-fed Shrink Wrapper Acmi Model: SHRINK-WRAPPER Fenix Year: 2019 Version: film launching Type: film only Handle Applicator Smipack Model: HA 35-50-70 Year: 2002 Palletizer Alsim  ...

Used Used Bottling Line Beer Glass 6.000 bph: Year: 2011 Condition: Good Used Bottling Line Beer Glass: Product: Beer, water and lemonade Speed: 6.000 bph Clockwise Depalletizer Flema Star C-CL Year: 1996 Speed: 500 cph Operating mode: Pneumatic, gripper with hooks Decrater RICO UNO Year: 2010 Speed: 350 cph 1 head 20 pick for head Heads can be changed: ? 1 head for NRW 0.5 l bottle ? 1 head for 0.33 l Ale bottle ? 1 head for NRW 0.5 l screw-cap bottles Decapper ADELSKI Year: 1995 Speed: 12,500 bph Type of cap: crown Washer-Dryer Macero PAC CB 14-0.5l-R-7 LII Compact Year: 1998 Speed: 7,500 bph All stainless steel Steam heat exchanger included Bottle Inspector SYSCONA Alkali LC 10 FD + Metal Detection Year: 2007 Speed: 15.000 bph Monoblock ICS- ARKOR Model: multiFILL-VK 24/6CR/6RA Year: 2011 Speed: 6,000 bph Rotation direction: counterclockwise Filler 24 valves Filling type: isobaric Two ...

Used Used Bottling Line Isobaric Champagne 9.000 bph: Year: 2010 Condition: Good ISOBARIC LINE FOR STILL WINE AND SPARKLING WINE Speed (sparkling wine): Semi-sparkling 8500 bph of 0.75/h, sparkling wine 5500 bph of 0.75/h Speed (still wine): 9000 bph of 0.75/h Ape depalletizer: Model: Depal 2010 Year: 2016 Speed: 35 cycles/hour Type of push operation Pallet magazine Pad removal system Processed pallet size: Width min 1000 mm ? max 1000 mm Min length 1200 mm ? max 1200 mm Empty pallet height min 140 mm ? max 200 mm Triblock Virmauri Model: Cheope 32/48/6/6 Year: 2000 Direction of rotation: clockwise Rinser 32 clamps Electric carousel height adjustment with button Fixed nozzle 2 treatment Filler 48 filling valves Tank height adjustment: electric with button with anchor Hand vent Isobaric filling Type of valve: mechanical Valve Functions: Degassing Capper 1 6 heads Type of workable cork: le ...

Used Used R.Bardi Returnable Bottling Line: Year: 2009 Condition: Good Used R.Bardi Returnable Bottling Line: Model: Victoria 5G Year: 2009 Speed: 1.500 BPH Safety protections Cap unscrewer: Bottle-Washer Macero Material of construction: total steel 6 file 23 washing stations Filler 6 valves with flow meter Capper (including cork elevator) Single head Type of workable cap: plastic pressure cap Cap size: ? 55 mm Code: NP 685 More details: https://bottlingscout.com

Used Used Sidel Complete PET Bottling Line 28.000 bph: Year: 2005 Condition: Good Used Sidel Complete PET Bottling Line 28.000 bph: Product: CSD and Water Speed: 28.000 BPH Feeder preform Lanfranchi Year 2023 COMBI SIDEL Year: 2005 Directions: counterclockwise Composed of : blowmoulding PET SIDEL Model: SBO 20 Cavities: 20 Moulds NOT INCLUDED Preform elevator/orientator included Chiller not included Filler SIDEL Valves: 140 Isobaric filing Filling by mechanical ? volumetric Degassing Capper AROL Closing Heads: 15 Pick & place distributions Nitrogen Nitrodose System Year: 2017 Mixer Sidel Modello MAS ? MIX Vacum pump missing CIP Sidel Model: CIP AUTOMATICO Elevator/Tilter AROL Model: ELEV PNEU Bottles dryer SIPAC Labeller Krones: Model: Contiroll 960-24-2 Year: 2002 Directions: Counterclockwise (parallel inlet/poutput) Electri adjustment height Number of plates: 24 Mechanical cams by belt ...

Used Used PET Bottling Line BC 8.000 bph: Year: 2004 Condition: Good Used PET Bottling Line BC 8.000 bph: Product: still water Speed: 8,000 BPH Blow molding machine PET SIAPI Model: EAS70.115.9 Year: 2003 Linear 9 cavities Chiller Eurochiller Model: GCA 035 Year: 2015 Rinser WAB: Model: Advance RP 1R 32/113 T Year: 2002 Clockwise 32 Clamps Electric carousel height adjustment with button from the operator panel Fixed nozzle Double treatment Filler BC: Model: Master RS 32/32/8 Year: 2004 32 mechanical valves Type of filling: isobaric Electric tank height adjustment with button from the operator panel Capper AROL: Model: Euro PK 8 heads Electric manual head height adjustment with button from the operator panel Type of workable cap: pre-threaded plastic caps (three principles/corvaglia) Cap measurements: ? 30 mm; Height: 15 mm Distribution system: pick & place Caps elevator MARMO: Model: ALP ...

Used Used Complete Bottling Line Sidel PET 18.500 bph: Year: 1999 Condition: Good Used Complete Bottling Line Sidel PET 18.500 bph: Product: PET Bottles Speed: 18,500 BPH (2 L bottles) PET Preform Tipper VE.CO. ? Year 1997 Model: 30L917 PET Preform Orientator Sidel ? Year 1999 Model: XMMC94 PET Blower Sidel ? Year 1999 Model: SBO14 Number of molds: 14 Air recovery system Air Conveyors Lanfranchi ? Year 2007 Monoblock Sidel-Simonazzi and Capper Arol Model: EUROSTAR RAA282 ? Year 1985 Direction: Clockwise Rinser 50 grippers Manual carousel height adjustment Fixed nozzle 1 treatment with water Filler 80 valves Filling type: Isobaric Valve type: Mechanical Valve functions: Degassing and sanitization Electric tank height adjustment Capper Arol 10T ? Year 1998 Model: TS EURO/K10T.350O Manual head height adjustment Cap type handled: 3-START HEXALITE Cap dimensions: ? 28.6 mm h: 10.5 mm Cap feed ...

Used Used Complete Bottling Line MBF 9.500 bph: Year: 2015 Condition: Good Used Complete Bottling Line MBF: Speed: 9,000 BPH with Cork cap 9,500 BPH with aluminum screw cap Ape depalletizer Model: Depal 2010 Year: 2015 Speed: 60 layers/hour Automatic operation Type of operation: by layer Workable pallet dimensions: 1200 mm x 800 mm; 1200 mm x 1000 mm Automatic layer removal system Pallet warehouse MBF triblock Model: Synchrofill 1440.40F1/1440.40LV/360.6R/360.5V Directions: Counterclockwise Rinser Single treatment 40 clamps Electric adjustment height Fixed nozzle Type of treatment: water Filler 40 valves Electric tank height adjustment Filling type: light vacuum Mechanical valve Valve functions: gas injection before filling, automatic level adjustment system by operator?s panel Corker 6 heads for natural straight corks. Cork size: minimum height 34 mm; maximum height 54 mm Electric head  ...

Used Used Kosme Complete PET Bottling Line: Year: 2018 Condition: Good Speed: 5.300 bph ? 500 ml PET Kosme Preform Hopper ? year 2018 Kosme Preform Elevator ? year 2018 Kosme Preform Disorderer ? year 2018 Kosme Blow Molding Machine ? year 2018 ATS Chiller Air Conveyor Mixer for Caramelizing Techniques ? year 2016 Kosme Filler ? year 2017 AVE Capper ? year 1999 Kosme Labeler ? year 2018 Mixed Conveyors Shrink Machine SMI ? year 2001 SMI Thermal Tunnel Suitable for packs 6 / 12 / 24 Videojet Date Coder Logopak Box Labeler 2012 Code: NP 668 More details: https://bottlingscout.com

Used Used complete bottling vinegar line: Year: 2007 Condition: Good Used complete bottling vinegar line: Suitable for glass and pet bottles Speed: 6.000 BPH Direction: clockwise Ocim filler Year 1995 32 Valves Pal sterile filtration system with pre-filter (8 triple) + final filter (5 triple) Safety protections Bertolaso capper Year 1994 ? Overhauled 2010 5 heads Aluminum screw 31.5X18 Pressure plastic cap Cavagnino & Gatti labeler Year: 1994 ? Overhauled 2007 7 heads 2 glue stations for Front Back Printer by needles Formats included: Dorica 250ml. ? 48 mm. Toscano 500 ml. ? 57 mm. Marasca 500 ml. Side 57 mm 1 lt. Glass ? 85 mm. 1 lt. Pet ? 82 mm. Cylindrical format ? 66 mm. Sotemapack wrapping machine Year 2007 Packs of 12 bottles (4X3) Sealing bar Bundles with layer Devider included Code: NP 665 More details: https://bottlingscout.com

Used Used Complete Bottling Line for Wine 12.000 bph: Year: 2001 Condition: Good Used Complete Bottling Line for Wine 12.000 bph: Speed: 12.000 BPH with bottles of 0.75 L Depalletizer Keber: Model: Depack 92 Year: 2001 Speed: 65 layers/hour Pallet Storage Inter-layer system Dimension pallet 1000 mm x 1200 mm x 1400 mm Maximum height for pallet 2300 mm Microfiltration Pall: Model: Saso64gnw80j-it Year: 1998 Triblock KHS Model: Innofill um Clockwise directions Speed: up to 33.000 BPH Triblock composed of Rinser 100 clamps Automatic adjustment height Fix nozzles Double treatment Water and Nitrogen Filler 100 valves by gravity Automatic adjustment height tank Mechanicals valves Pre-evacuation Capper 20 heads for natural straight corks Dimension of corks: 25 mm ? x 48 mm H Vacuum before capping Inert gas injection system before capping Stelvin capper 15 heads Nr. 2 pneumatic cap elevators 3 I ...

Used Used Complete Bottling Line for Wine: Year: 2008 Condition: Good Used Complete Bottling Line for Wine: Speed: 3.000 bph Direction: Clockwise Depalletizer Tmg Vega 60 ? 2008 Push System Rinser Ave Rai 12 ? 1999 Number of clamps: 12 Single treatment Fixed Nozzle Filler Cobert Suprema ? 1985 Number of Filling Valves 24 Type of filling system: Isobaric Filling System Self-leveling Degassing Pre-evacuation Capper Arol Geini/ rf ? 1997 Single head for Natural Straight Cork e Mushroom Cork Caps Elevator and Orientator Neri ? 1990 Capper Kompass Star One Av ? 2007 Single head Capper Stelvin 30?60 Wirehooder Nortan Minerva 108 ? 1997 Washer-Dryer Cames tnn 1 Air Blade- 2001 Capsuler Nortan Unicap 35 t.s ? 1997 Single heads for: Pvc Capsules Polylaminate Capsules Capsuler Nortan omega 3 heads champagne ? 1995 Dryer Tunnel ? 2017 Labeller P.E. 9T Universal/master/s ? 2000 4 adhesive stations L ...

Used Used PET Bottling Line Krones 30.000 bph: Year: 2006 Condition: Good COMPLETE BOTTLING LINE KRONES 30.000 bph Product: still water Speed: 30.000 bph ? 1.5 lt PET Preform tipper ? 2018 Model: m.tanner ag/prologic Caps elevator Gassner ? 2006 Manufacturer: gassner Preform aligner (part of the blow molding machine) ? 2006 Monobloc with blow moulder, filler and capping machine Blow molding machine ? 2006 Brand: Krones Model: krones contiform s20 Type: Rotating number of stamp: 20 Filler ? 2006 Model: krones volumetic Direction: Counterclockwise Number of filling valves: 84 Type of filling system: gravity flowmeter Capper: (it is part of the monoblock) ? 2006 Number of heads: 18 Type of cap: alaska 3 Principles Distribution system: pick & place Nitrogen dispenser ? 2006 Model: cryotech international Inspector for level control and cap ? 2006 Model: krones checkmat Bottle transport ? 2006 ...

Used Used Bottling Line Bertolaso 2.000 bph: Year: 1999 Condition: Good Used Bottling Line Bertolaso: Direction: Clockwise Speed: 2.000 bph Rinser SBR 1R.4.12.132 Year: 1999 12 Clamps Fixed nozzle Single treatment Filler Bertolaso Olimpia 12 (Mono pump included) 12 valves Filling System: Gravity ? low vacuum Capper Bertolaso Gloria 500 R/S Cap: Natural Straight Cork Capper Bertolaso Alfa 110 Capper: Crown Cap 29mm Washer-Dryer Cames WDT-3-8 Year: 2004 Dryer ? Air blade Labeller Cavagnino&Gatti Cg80/4/2xps Year: 2012 Direction: Counterclockwise Number of adhesive stations: 2 4 heads microfiltration system 3 housing Code: NP 663 More details: https://bottlingscout.com

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

This OGM 1.5 pellet production line is designed for processing straw, hay, alfalfa, miscanthus, compost,and other agricultural raw materials. The pellet press is also suitable for the production of wood pellets. The entire line has been dismantled and is ready for loading. Production Capacity - Maximum hourly output: up to 1300 kg per hour (material dependent) - Individual components such as the hammer mill can achieve higher hourly output Line Components - Pellet press 75 kW, year of manufacture 2013 - Elevator, year of manufacture 2013 - Pellet cooler with sieve, year of manufacture 2013 - Buffer tank with discharge for ground material, year of manufacture 2013 - 2 cyclones (centrifugal separators) with rotary valve, year of manufacture 2013 - 1 fan for radiator exhaust, year of manufacture 2013 - 1 new ring die and various used spare parts - 10 m feed table to bale unroller, year  ...

On behalf of our client, we are requested to offer this Pasta filata cheese line for sale, due to increasing production at the current factory. The whole line is delivered and built up by Sulbana AG Switzerland in 2019 and it is out of production for ± 1 year. The pasta filata cheese line produce products like Mozzarella, Burrata, Kashkaval, Pizza Cheese etc. The capacity of the line is 200 to 800 kg per hour. The line is already dismantled and located in the warehouse of the dairy in Germany, where it can be inspected., The line exist out of the following components:, - Elevator for lifting normcar trolleys of 200 liter with basic ingredients including tipping unit to empty the trolleys inside the feeding bunker. Max load: 350 kg. Manufacturer: Frontmatec Hygiene GmbH, type: Hebe- Und Kippvorrichtung, model: 27000, serial number: P-10259, year: 2019, motor: 0,75 kW - 400 V - 50 Hz., -  ...

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

Koch Membrane Systems (GEA Tuchenhagen computer designed) Ultra Filtration (UF) plant for continuous circulation / concentration / filtration and the production of double cream cheese (philadelphia style). Once the plant is running continuously with ratio control, no manual interventions are generally necessary for the production of the UF concentrate. However, for optimal production of consistent quality, strict adherence to various prerequisites is necessary, e.g. regarding cleaning. Line still located at its original position in the dairy in Austria., The Ultra Filtration line exist out:, - Level tank, 750 liter., - Product feed pump (P1), Tuchenhagen VPB 32 L, 5.000 ltr/h, 39 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - Permeate pump (P2), Tuchenhagen VPB 32 L, 5.000 ltr/h, 35 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - CIP pump (P3), Tuchenhagen VPD 51, 110.000 ltr/h, 8 mWs,  ...

Unused renovation kit for an Alfa Laval CPM Constant-Pressure Modulating Valve (CPMI-2) pneumatic regulating valve. Genuine Parts Service Kit CPMI - 2/XPMO - 2 Upper NBR, Lower EPDM/PTFE, part no. 9611920218., Type of Machine: Constant-Pressure Modulating Valve, Art. no.: 9611920218

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A. Diameter of the impellor: 180 mm. Connections on the inlet: 70 mm. Connections on the outlet: 60 mm. Estimated capacity: ± 20.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A, Estimated capacity: ± 20 m3/h

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

2018 Dr. Collin ZK 16 Twin-Screw Lab/Pilot Polymer Extrusion Line Overview Excellent opportunity to acquire a complete, high-quality laboratory/pilot extrusion line manufactured by Dr. Collin GmbH, an industry leader in R&D and polymer processing equipment. Built in 2018, this co-rotating twin-screw extrusion line (ZK 16 model) is specifically designed for processing plastic materials in small batches, making it ideal for research and development, testing, compounding, and new formulation development. Key Technical Specifications Manufacturer: Dr. Collin GmbH – Lab & Pilot Solutions Model: ZK 16 (Twin-Screw Extruder) Year of Manufacture: 2018 Condition: Used (Dismantled and ready for transport) Screw Diameter: ~16 mm (Co-rotating twin-screw) Power: 8 kW Voltage/Current: 400 V + N + PE / 15 A / 3~ 50 Hz Operating Pressures: Water: 4 bar / Compressed Air: 4 ...

Pastry line, Fabr. Rondo, Compactline conveyor belt width 640, total length 7,000 mmStainless steel version, mobile

B+S/Dividella/Mettler-Toledo Garvens/Pester labelling & packing line for ampoules and vials comprising Bausch + Ströbel ESA 1025 high output self-adhesive labeling machine suitable for ampoules and vials, object diameter up to 36 mm, object height up to 140 mm, output up to 30,000 labels per hour, includes Allen hot foil coder, machine net weight approx. 1140 kg, Dividella NeoTop 904 topload cartoner with partition for ampoules and vials, format range min. 60 x 45 x 17 mm (LxWxH), max. 150 x 150 x 32 mm (LxWxH), capacity up to 900 objects/min. and 90 packs/min., Robatech hot glue unit, RonTech booklet-feeder, GUK leaflet folder from stack, Mettler-Toledo Garvens XS 2 MV checkweigher, max. 600 g, d = 0,1 g, T = -540 g, Pester PEWO-pack 250 compact stretchwrapper for folding cartons, etc maximum film width 250 mm, maximum format range 180 x 400 x 200 mm, capacity up to 60 bundles per minu ...

Transnova-RUF robot Flex Line RV-400 case packer & palletiser, packaging section with infeed conveyor, magazine, erecting/loading robot, carton closing station using self-adhesive tape at the bottom and top, carton discharge with labelling system (2 carton labels at a corner position of the carton), palletising with palletising conveyor (1-3), pallet lift and palletising robot (ALU-EURO pallet (1200 x 800 x 144 mm, loading height max. 1575 mm incl. pallet), max. 5 layers), electrical connection 230/400V/50Hz/3Ph, power consumption max. 10.7 kW, output up 0.65 cases/min or 2.9 pallets/hour

Number of systems available: 2 Year of Construction: 2010 In operation until: January 2014 System Components and Manufacturers - Transport system: Güdel Company - Finish station: Technofinish / Emtec - Car wash / spray cleaning unit: MTM - Measuring station: Komeg (post-process measurement) - Automation and control: Roth GmbH Equipment Included - 2 complete finish systems (Finishanlage komplett) - 2 spray cleaning chambers SKR 12 (Spritzkammer Reinigungsanlage) - 2 post-process measuring stations for shaft components - 2 automation control cabinets - 2 palletising units EuroPal P64 - 2 portal handling systems ZP-2 with 6 carriages each - 2 camera inspection systems InSight 5100 - 2 BOGE compressed air centres CLDF 9-270 - 6 transport trolleys - 140 workpiece trays 400 x 600 x 35 mm - 2 KLT transport systems (left and right) - 26 servo motors Siemens 1FK7042 - Suction grippers, sin ...

Consisting of: wiring cables, various underground cables, Ölflex, NYM in various cross-sections, Draka cables and rubber cables. In stock on 11 pallets. Auction-ID: A1-46700-12

Line is consisting of:, Weber slicer, Type: CCS904, Serial number: 7096, Year of construction: 2007, Capacity: 2000 RPM, Slice thickness: 0.5 - 50 mm, Compressed air: 10 Bar, 150 L/min., Power: 3 x 400V, 50Hz, 10 kW, Dimensions: 13400 x 1900 x 2600 mm, Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit, Pago labeler, Type: System 516, Serial number: 212516068, Year of construction: 2012, Mettler Toledo metaldetector and checkweigher, Type: XS3, Serial number: 35000430, Year of construction: 2008, With reject, Bosch Sigpack Systems robot / cartoning line, Type: LDM + TTLi, Serial number: J-01659-LDM-042 / J-01659-TTLi-077, Viewtech optical control, Type: VT2007/010, Serial number: VT2007-DCDCL/057, With reject

Description: NEW in box, never used, Order number: ON17163, Capacity: max 800 pigs/hr., Products: pork carcasses, left & right, Slaughtered weight: 70 - 120 kg, Air pressure: 6 - 8 Bar, 285 Nl/min., Power: 3 x 400V, 50Hz, 45kW, Dimensions: 10000 x 5150 x 2300 mm

Automatic double sanding system for battery boxes, each identical to the Kuka robot, wood and parts sanding device, housing, with roller infeed and outfeed, year of manufacture 2023

Material Name: Shaft sprocket RS160-2-43T - 6 lines x 2 Material Brand: Generic Model: RS160-2-43T Material Type: Duplex Sprocket Material Specification: C45 / SCM415 steel PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: Gearbox pulley 4 SPB 180mm - 6 lines x 2 Material Brand: Generic Model: 4SPB 180 Material Type: V-belt pulley Material Specification: Cast Iron PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: Gearbox sprocket RS160-2-20T - 6 lines x 2 Material Brand: Generic Model: RS160-2-20T Material Type: Duplex sprocket Material Specification: C45 / SCM415 steel PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam:  ...

Line is consisting of:, Townsend MasterFormer, Type: TA1521, Serial number: 10080439, Year of construction: 2010, Stork MasterFill, Type: MTFII, Serial number: 0441010, Year of construction: 2010, Stork Master Slice, Type: DRST, Serial number: 0420410, Year of construction: 2010, Caliber: 50 mm, Karl Schnell vacuumfiller, Type: P10SE, 596P, Serial number: 22045, Year of construction: 2010, Power: 3 x 400V, 50Hz, 10.9kW, Weight: 1180 kg, Risco vacuumfiller, Type: RS303, Serial number: T310021, Year of construction: 2010, Power: 3 x 400V, 50Hz, 7.7kW, Weight: 830 kg, With RS70 grinding head

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height:  ...

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.