128,273 used machines on RESALE, but how to find them? Machine Search
GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers
Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!
used
Used fluid packing machine in foil bags made by Unipak, type ASG 3T.
Used Stork monoblock. 32 fillers and 8 screw heads. For PET bottles. Dose adjustment on the pistons.
Used Hamba packaging machine for 75 mm cups. Capacity depending on the product up to 6400 cups per hour. Modernized in 2007.
1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.
1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.
The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...
Juice mixer, juice mixing plant. Fruit juice bottling Beverage mixing plant used. Manufacturer: Füllpack GmbH (Gea Group) Model: Fuellmix-MB Elo Filling Mix MB PLC S7 and Monitor Visualization Fuellpack Mixer 2 / Mixing plant 2 Power approx. 7000 - 15000 l/h Including Fischer-Porter flow meter; Valves, pumps, Panel Documents available Dimensions 2800 x 2100 x 2100 mm
used
Qty. 1 Second-hand carusel Monoblok filling line Mfc.: Stork Bepak B.V. Built: 1992 Type: VS 60/110/12LV Capacity: 20 000 Btl./h No. of filling stations: 60 pieces No. of closing heads: 12 pieces Size of buttles: 250, 500, 700 & 750 ml Inspector checking the fill level and cap Very good condition!
We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.
Tube filling and sealing machine for PE, laminate and metal tubes Power up to 3,700 tubes /hr depending on
Capacity: 6,000 - 8,000 cups/hrs Number of tracks: 4-lane longitudinal runner Closure: Sealing Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Please contact us.
Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW
2 mobile filling machines, manufacturer unknown, function untested! Auction-ID: A7-45677-54
Make : Ilpra Model : FS 5000 Year of Manufacture : 1996 Cup Size : 95mm Volume : 100 ml to 450ml Capacity : 4000 pcs per hour Voltage : 3 phase / 50Hz Air : 6 Bar HEPA Filter CIP Out Feed Conveyor Condition : Very Good Available : Immediately Previous Use : Yoghurt and Deserts Filling
Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person
Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 50 litre funnels. Filling head height infinitely adjustable. Dosing quantities and filling speed infinitely adjustable, control line for external pulse generators. Pneumatic drive, external compressed air supply 6 bar required. Dimensions B/T/H 130/70/190 cm. Workshop-tested, ready to use. Further on request.
Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...
Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for powdery, liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 12 l funnel with screw conveyor. Filling head height infinitely adjustable. Dosing quantities and filling speed can be infinitely variable. Pneumatic drive, external compressed air supply 6 bar and 400 V power connection required. Dimensions B/T/H 120/45/210 cm. Workshop-tested, ready to use. Further on request.
Technical Specifications & Performance Data The Tetra Pak® TBA 8 is a proven aseptic carton filler engineered for high-efficiency beverage production within an industrial packaging environment. This second hand unit is optimized for small-format Tetra Brik packs and offers reliable performance for dairy and juice applications. Manufacturer: Tetra Pak® Model: TBA 8 Year of manufacture: 1989 Category: Filling Machine (aseptic carton) Production speed: up to 6,000 packs/hour Format volume: 0.06 L (60 ml) Container type: Tetra Brik (carton) Configuration: Linear (non-rotary) Fill type: Aseptic carton filling Number of valves: 1 Certificate for tank testing: Available Typical applications: Dairy, juice, functional beverages Advanced Automation & Control Systems Designed for consistent, repeatable performance, the TBA 8 leverages a robust control architecture typical of the Tetra Pak® ...
Technical Specifications & Performance Data The Alfatek 15/1 ISO INNOVAZIONE is a second hand, isobaric filling monoblock designed for professional beverage production of still and sparkling wines. Built in 2002 by Alfatek, this compact unit combines precision filling with reliable capping, making it a strong choice for a used bottling line dedicated to glass wine bottles. Manufacturer: Alfatek Model: 15/1 ISO INNOVAZIONE Year of manufacture: 2002 Configuration: Isobaric filler + integrated capper (monoblock) Filler valves: 15 Capper: 1 head (wine closures as per configuration) Nominal speed: up to 2,500 bph on 0.75 L still wine (actual output varies by product and settings) Container type: Glass bottles Bottle format: 0.75 L Products: Wine (Still), Wine (Sparkling), Spumante Filling technology: Isobaric counterpressure for sparkling products Safety: Safety features included; interlocked ...
1-A3 Flex 1000ml Gemina Filling line with two extra volume change kits 500ml and 750ml Year of manufacturing 2016 2-Cap applicator Cap Flex 30 3-Helix Accumulator 90 meter 4-Date printer 5-Conveyors 200 feet 6-Paper Trolly
Technical Specifications & Performance DataThis Pentablock Filling Monoblock combines rinsing, filling, corking, and wire-hooding in a single compact rotary frame for glass bottle handling. Manufactured by Mondial, the LD 16-16-3E/PK-1RF-1V configuration delivers robust mechanical design with precise bottle control across the rinsing, filling, capping, and wire-hooding turrets. It is suitable for second hand installations and integration into a used bottling line focused on beverage production and industrial packaging.Model: LD 16-16-3E/PK-1RF-1VBottle materials: GlassBottle formats: Compatible with 0.33L and 0.75L bottle formatsRinser turret: 16 grippers (rotary)Filler turret: 16 valves, gravity/light depression technologyClosures supported: Crown cap, champagne-style mushroom corkWire hooding: Integrated wire-hood applicator for champagne-style closuresHMI: Siemens OP73 MicroTypical ap ...
The TBA 8 is one of the most reliable Tetra Pak machines around. The TBA 8 shown here is equipped for filling liquid foodstuffs with a volume of one litre of Slim. The machine is from development stage V 100. With an output of 6000 packages per hour, it corresponds to the standard speed of a TBA 8. The filling machine is overhauled by us in our own workshop in Germany. In the course of the work, many wearing parts will be replaced, and all electrical, pneumatic, hydraulic and mechanical systems will be checked. After the change of parts is completed, we start extensive testing to verify the flawless production of the machine. For this purpose, the system is fully connected and we produce sample packs filled with water during the final adjustments. In doing so, we can adjust the final details as precisely as possible. If you are interested in a TBA 8, we will be happy to send you an exte ...
The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product
Recommended as a line with PT 8, TCAP 47, Packer TCBP 70. Originally developed for 1.5 liters, this machine with this volume produces 6000 packs per hour. The V100 development stage and the special feature of the final sealer system, which requires one star, make the machine special. Smooth running and durability with consistent quality are the hallmarks of every TBA 8. After the extensive service check in our workshop, we pay particular attention to the correct settings of the system for reuse. It is particularly important to us to adjust mechanical and electronic systems flawlessly in order to avoid later malfunctions. The pneumatics and hydraulics of the system must be carefully checked and maintained. Many of our customers have already been able to convince themselves of this during the work. Even after many years, these systems are ready for further use after our overhaul. A cost-ef ...
Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand
Recommended as a line with PT 8, closure applicator TCAP ReCap 2 and packer TCBP 62. The 1000 Base format is Tetra Pak's classic one-litre brick format. This TBA 8 offered here is from the V100 development stage. Like all of our Tetra Pak machines, this line is first subjected to a thorough incoming check. After the following cleaning and the extensive examination of the condition, we overhaul the machine with the necessary care. This machine is equipped with a TP MC control system and produces 6000 packs per hour. As with most Tetra Pak machines, we are happy to offer you these with the associated machines for an entire filling line. Regardless of this, we will be happy to advise you in advance and make you an individual offer. Please contact us or schedule a visit to our workshop to see the extensive work for yourself. From our extensive range of machines that we have in stock, we are ...
The further development of the TBA 19 V10 was initially called V 20. The main changes can be seen at first glance in the control system and the final sealer. Like its predecessor, the system produces 7500 packs per hour in this format and does not differ from the TBA 19 V 10 previously known. The further development of the TBA 19 includes extensive innovations in the control and mechanics of the plant, which can lead to an improvement in efficiency in constant operation. As with all other machines, smooth and efficient operation requires consistent adherence to service intervals. The operator on the systems should be intensively trained and have sufficient experience in operation. This system also undergoes all the necessary tests and inspections before handover. Our customers are invited to this at any time in order to be able to inspect the machine in operation during the acceptance pr ...
Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...
TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter Slim format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we ca ...
TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter base format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we can ...
Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...
Used nacuum monoblock MO10/4. New 2010. AUTOMATIC MONOBLOCK FILLING MACHINE is adapted to filling non-carbonated liquids and screwed into PET bottles. The machine has tooling adapted to the bottle and cap pattern. Technical parameters: capacity max. 3000 bottles/h 0,1 L PET 10 pcs of fillers 4 pcs capping heads motor 2,2 kW, 900 rpm power 3x380V/60Hz Compressed air demand 1,5m3/h dimensions 1530x1230x2400 mm weight 950kh.
Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...
Used sachet machine made by Sovapack for packing powder into flat bags 100x100 mm. Overall height (with hopper) 22350 mm, width 1100 mm. Width of the rollers guiding the foil 560mm, 800 mm. Hopper height 645 mm, width on top 75 cm, width at the bottom where there is a hoop with holes for the bolts on which the funnel is placed is 16cm.
For many years, the TCAP 47 was considered one of the preferred closure variants for one-liter packages. However, when using one-liter Slim packs, this closure is disappearing more and more from the manufacturers' ranges. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. This new HeliCap 23 cannot normally be applied with the existing TCAP 47. However, we are able to convert the existing TCAP 47 for the new HeliCap23 with our workshop team. After that, you can continue to operate your filling line without a PT, which also saves service costs on the PT. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive ...
Specific Details Industry:pharmaceutical, cosmetics, nutraceutical, food, others Number of cartons:70 /min Length of carton (min):60 mm Length of carton (max):210 mm Width of the carton (min):20 mm Width of the carton (max):125 mm Height of the carton (min):15 mm Height of the carton (max):80 mm Motion:intermittent Leaflet device:Yes
The further development of the practical ReCap solutions in an even more user-friendly design. Better product flow makes it easier to use. The TCAP 21 ReCap 3 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 3 combines benefit and cost awareness in optimized product design. In addition, the product receives an optimized secure closure solution. Suitable options: conveyor belt system and cardboard packer with or without wrap around, tray shrinker and other equipment. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.
The straw applicator is the perfect solution for straw application. It is installed between the filling machine and the packaging machine and has servo motors and one or two inverters. The regulated and controlled application of the straw is thus perfectly possible. For years, this unit has been one of the most popular on the market. The constant and trouble-free speed of up to 7500 units/h is ideal for use in conjunction with the TBA 19 filling machine. To ensure that everything runs smoothly, we recommend installing a conveyor belt volume of at least 20m between the filling machine and the applicator. All components were checked and tested. The range can be used for different volume sizes. For this purpose, various components have to be replaced, which we are happy to do at the customer's request. On request, we can provide extensive services. In addition to consulting and plannin ...
TETRA PAK A3 COMPACT FLEX 250ML AND 200ML PRISMA FILLING LINE Item #: Usm-131 Category Tetra Pak A3 CF/Flex A3 Compact Flex 200ml and 250ml Prisma Filling Line with quick Change kit. Year of manufacturing for the full line is 2016 and few working hours, just like new 1-A3 Compact Flex 200ml and 250ml Prisma Filling machine, Speed 9000 Packs per hour 2-Date Printer 3-Helix Accumulator 30 meter 4-Straw applicator TSA 30 5-Shrink 30 6-Conveyors and Paper Trolly
This is a power unit with 2 servo motors. The TSA 46 applicators have a compact design and are very reliable. Trouble-free operation in a filling line is guaranteed even with long operating times. We have different variants of straw applicators in our warehouse. Regardless of the condition, all devices undergo a service in which the perfect status is established. For this purpose, wear parts are also replaced and finally various test runs are carried out for later use. Since the package size and also the type of straw vary, we can only assemble the final format parts after an order. If you are interested, please let us know for which format you want to use a TSA 46. We will make you an offer immediately. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a deta ...
Piston dosing filler for cold and hot products (e.g. syrup, jam, chutney,...) Filling volume 50-1000ml
Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.
Filling & Packaging Line for Condiments Main equipment: - Kugler piston filler – filling machine for viscous products (horseradish, sauces) - Jar closing machine (Effe Elle) – sealing of glass containers (twist-off caps) - Bottle rinsing machine (NOVOPACK) – cleaning/preparation of containers - Jar unscrambler / separator – feeding and orientation system for jars - Conveyor system (T1) – product transport and line integration Highlights: Complete industrial processing line for condiments Suitable for mustard, horseradish, sauces, and similar products Food-grade stainless steel equipment Integrated workflow: cleaning → filling → closing → transport Machine details: 1. J. Kugler & Co. GmbH K24R – Piston Filling Machine Year: 1994 Serial number: 15382 Dimensions: approx. 2500–2600 x 1500–1600 x 2800–3000 mm Weight: approx. 1200–1300 k ...
1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.
maximum number of results exceeded
please refine your search
50 € 
