136,841 used machines on RESALE, but how to find them? Machine Search
Vertical Cylindrical Transportable Tanks. Stainless Steel 700L Approx. Insulation, temp probe pocket port, carbonation stone port, sample tap port. Previously used for carbonating beer. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Transportable 1000L Bulk Container Tank Manufacturer: Bison Stainless Steel, Top Entry Manway. Previously used for spirits This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Horizontal Tank Stainless Steel 6 Barrels / 220 Gallons. Horizontal stainless steel vessel, dished ends. Free standing on 4-off stainless steel legs with adjustable feet. 1½” RJT Female Top inlet. 1 x 120mm diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
900L Vertical Tank Stainless Steel Working capacity 5 Barrels / 200 Gallons. Vertical stainless steel vessel, dished top and base. Free standing on 3-off stainless steel legs with adjustable feet. DIN40 Top inlet. 1 x 120mm diameter Viewing Glass 1 x DIN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame. ...
Quiel AAGS Filling Line for Pieces of Meat/Gyros/Gullasch For sale is a filling line from the manufacturer Quiel, model AAGS, specially developed for the processing and filling of pieces of meat Operation of the system: The meat to be processed is filled into the storage container using a lifting and tilting device. There it is continuously moved by the mixing device and then transported to the dosing belts via screw conveyors at the bottom of the container. A squeegee ensures an even distribution of the product on the belts. At the end of the dosing section, the meat falls through discharge chutes into the trays or containers below. The dosing time can be set individually, which allows the portioning to be precisely controlled. If a single portion does not reach the desired amount, the control system allows for a double ejection, in which two portions are filled into the same cont ...
Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm
Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a cleaning and disinfection device (RDG) that has been specially developed for the mechanical reprocessing of instruments in medical and dental departments. It integrates important functions such as active drying and media collection directly into the device to save space in the practice. Dimensions: The device measures approx. 59.8 x 81.8 x 67.8 cm (W x H x D) and thus fits under a standard 60 cm worktop Capacity: The optimized reprocessing chamber can accommodate instrument sets of up to 45 patients per batch Active drying: Reliably protects instruments from corrosion and recontamination through integrated external and internal drying Integrated process media: Cleaner, neutralizer and rinse aid are stored in a drawer directly in the device to save space Manufacturer: Melag Type: Melatherm 10 DT Vo ...
Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...
Monoblock KRONES VKS- 054-PET Year of construction -1991 Number of fillers - 54 pcs., Number of screw heads - 8 pcs. The machine is in a state of technical novelty after a major overhaul in 2026, It has one set of format parts per 1.5 liter PET bottle
PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing
Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl
grinding length: 1000 mm centre height: 175 mm b-axis: 1 ° max. dia. of grinding wheel: 500 mm internal grinding spindles: 60000 U/Min c-axis: 0.001 ° weight of the machine ca.: 5.7 t dimensions of the machine ca.: 4.25 x 2.2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Almab automation with bundling and stacking, Automation for planing line 120 m/min with de-stacking and infeed system, outfeed with bundling and automatic stacking system, Consisting of:, - Infeed with tilt hoist, - Unscrambler, - Automatic infeed system, - Outfeed with buffer conveyor, - Semi-automatic bundle, - Mosca strapping machine, - Stacking system, - Outfeed for wood packages
The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.
Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net
Maurer FKS 2000 Apollo boiling kettle, electrically heated in a glycerine bath, 200 liter capacity, external MC control and control box, with boiler float, core temperature sensor, replacement cover gasket, Connection 400V, 16.9kW, boiler inner dimensions LxWxD approx. 91x53x45cm, Total dimensions LxWxH approx. 140x84x102cm, weight approx. 390kg, Built in 1999, but hardly used, top condition, almost as new, checked by the bricklayer.
OPEM Arabella Vacuum Coffee Packaging Machine – 250 gr – with valve system For sale is an OPEM Arabella vacuum packaging machine, ideal for packaging 250 g of coffee (ground or bean coffee or similar products). The machine is technically in very good condition and fully functional. Technical key data: • Manufacturer: OPEM (Italy) • Model: Arabella • Year of construction: 2005 • Pack size: 250 g • Packaging type: Vacuum bags made of roll film • Integrated aroma valve system • Suitable for coffee with CO₂ degassing • Capacity: approx. 20–30 bags/minute (depending on product & format) • Robust industrial design Special features: Compact design Reliable vacuum technology Spare parts partly available Viewing and test run possible by arrangement.
Code: 0311 Brand: CIT MECCANICA Model: V 25 / KS Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Minimum pitch of saw teeth 2 mm Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Overall dimensions mm 900 x 650 x 1400 h Weight 115 kg
Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...
Handtmann VF 50 incl. turning device and complete accessories
Single head semi automated cask filling machine, that incorporates isinglass finings dosing. Manufacture : Microdat Model: CF55 Year of Manufacture: 2013 Single phase For more information and more available stock please visit us at - advancedbrewing.co.uk
75HL Vessel - Atmospheric Fermenting vessels Vertical Cylindrical with conical base Approx dimensions: Overall height 4850mm Overall diameter 2200mm Legs 1830mm Top Dish 450mm Working capacity 75HL Max Brim full capacity 100HL estimated Fittings inlet/outlet 2” RJT Vessels fitted with internal rotating sprayballs ,sample taps, ,racking point with racking arm and a central top manway entrance There are cooling jackets on the Cone and the side wall (single zone) Vessels are insulated and clad in riveted stainless steel The vessels have previously operated at up to 3 Bar. However there are no specification plates on the vessels and the design drawings are not available Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk
Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk
Cylindrical, Vertical stainless steel tank 25BBL Working capacity Supplied By East field Process Diameter Approx 2400mm Overall height Approx 2850mm Top entry man way door External cooling Jackets on tank shell Insulated with stainless steel cladding over Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.
1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running
Banding / Banding Machine ATS Tanner Type US 2000 LB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven and universally applicable (see video below). Versatile, infinitely adjustable via two potention meters/rotary controls in terms of belt tension and belt length. Tape can be added later via pressure switches if necessary. Counter currently shows around 740,000 work cycles. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.
Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar
Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar
Our state-of-the-art Automatic Tube Filling Machine is a versatile all-rounder and has been developed to optimally support companies with the highest quality standards. Thanks to its high-quality workmanship and wide range of applications, it offers intuitive operation that optimizes your tube filling processes efficiently and reliably. The powerful drives and the user-friendly color touchscreen control system allow maximum flexibility for format and product changeovers and greatly simplify your tube filling. The machine has memory locations for quick and reproducible setting of all relevant machine parameters. If you would like to optimize your tube filling processes through a strong production output with high quality at the same time, we at Impuls Packaging are your ideal partner. Overview of the overall system Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 ...
A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.
s/s-style, adjusted for filling and closing of vials/bottles 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts Output max. 3,000 objects/h according to product Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps Drip retraction 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm 2 sets dosing needles, each 2 pcs, several dia PLC Klöckner Möller PS4-201-MM1, touchscreen Eectr. connection 220/380V/50Hz
A Lips mixer, beater and roller grater is available. Mixer: bowl volume: 40 l, dough hook, mixing blades and whisk. Whipping unit: 2x 4-finger whisks, dough hooks, 5x whisk blades, 6x whisks and 9x bowl (volume: 10l-35l). Roller unit: hopper, round bowl, square stainless steel bowl, scraper and gripper guard. Machine dimensions X/Y/Z: approx. 2350mm/900mm/1350mm, weight: approx. 900kg. Including various accessories. The wood hopper of the roller must be replaced. If required, the gas burners must be retrofitted.
We supply and install our own, new, digital PLC controllers suitable for storage lifts and paternosters of all manufacturers on the market (e.g. Kardex, Hänel, Megamat, Electrolux Constructor, Zambelli, Intertex, Lista and many more). Our LTG StoreControl LL (storage lifts) and LTG StoreControl P-Touch (paternoster) control systems thus offer replacements for controls for which all spare parts are otherwise no longer available. With our controls, it is easy to connect your dynamic warehouse systems to higher-level warehouse management systems or to implement access restrictions.
The ABL PDS 50 TT is a powerful, fully automatic apple slicing and peeling machine designed for industrial fruit processing. It combines efficiency, flexibility, and reliability—perfect for producers of fresh slices, IQF products, apple rings, chunks, cider, or applesauce., Fully automatic alignment of the fruit, combined with peeling, coring and cutting processes – all in one pass., Versatile cutting options:, - Whole, cored apples, - Segments of 2 to 18 equal pieces, - Chunks, butterflies, discs or rings (3–15 mm thick), Ideal for:, - Producers of Fresh fruit, IQF or dried apple products, - Manufacturer of Apple rings and chunks for gastronomy and retail, - Provider of Cider, applesauce, compote or juices, - Contract packer and fruit traders who want to combine efficiency and quality, power: Output up to 50 apples/min (approx. 250–500 kg/hour) with consistently high quality, Wi ...
Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it
Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...
Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg
1x Mimot MX216 SL, built 03/2010 1x Mimot MB300 216 ML, built 01/2012 We also have both the infeed and outfeed belts for both machines. Find more here - .ucymachines/ Contact us at - sales@ucymachines
This machine automatically places a cloth or paper doily on the glass and usually secures it with a rubber band or string., Capacity: approx. 30 glasses / min,, The machine requires compressed air, oil and water free., power: approx. 30 glasses / min
A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...
Adhesive label printer and applicator, brand Logopak, type 920 III TE, year 2012, Logopak - Type 920 III TE, year 2012 for printing and applying labels on packaging and pallets,, for labels up to 210 mm width,, Labeling using pressing brush on the stamp diagonally,, with blinds,, Label roll diameter: 400 mm, 76 mm core (150 mm adapter),, Throughput: 15 labels/min. (idle labeling).
maximum number of results exceeded
please refine your search
