fermentation used for sale

Cat. No. 09-1049-1 in very good condition Standard: Material: V2A (AISI 304) 1.4301 with cooling jacket only 300 mm high with input 1" AG with manhole top m.6 screws DN 50 and DN 25 with outlet DN 50 - output 1 1/4 AG with conical underbody Pressure resistant 1.5 bar Diameter: 115 cm Height: 125 cm Weight: 106 kg Supplement (please ask for price): Fermentation spandconnection DN 50 Fermented spundar fitting Trial tap CIP Cleaning Blind cap DN 50 Diving shaft/temperature sleeve The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-4 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 2,100 mms of weight: 136 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Eurolux Beer Tanks / Fermentation Tanks in AISI 304 test pressure: 1,5 bar, operating pressure: 0,99 bar with Cooling Jacket with Isolation - Capacity: 1000 Litres NEW Material: V2A (AISI 304) 1.4301 Upper bottom: with Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 with over- and underpressure valve Tank Body: with Cooling Jacket 600 mm wide with inlet 1” external thread with Isolation Lower bottom: With Conical Bottom and rest outlet underneath with a forklift and pallet truck Measurements and weight: WxH: 1150 x 1950 mm Zyl. height: 850 mm weight: 170 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock Butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 Immersion socket for temperature control Temperatur ...

Bread intermediate fermentation cabinet Glimek 8 row / bread plant -Fermentation cabinet stainless steel clad -8 row -completely set up immediately available in the warehouse

INTERMEDIATE CHAMBER

Miwe proofing room GR -Miwe proofing room -Year of construction 2013 -15.58 kW -400/230V 3/N/PE 50Hz

Overview These fermentation tanks were manufactured in 2020 by the German company Speidel. They are CE-certified, equipped with a cooling jacket, and rated for up to 2.5 bar pressure. The tanks are in good condition and available immediately. Technical data  Capacity: 2 × 1,250 liters Pressure rating: 2.5 bar Cooling jacket: Yes Certification: CE Scope of Delivery  2x 1,250-liter fermentation tanks  

Munz Wiesheu GU20EDCS2040 for sheets 60x80 cm and 60x40 cm 22 editions made of stainless steel Run-to-run distances are 5.5 cm The feet are height-adjustable Technical data Type: GU-2080 Built in 2006 Voltage 230 Volt Power 3kW Cooling fluid R 404 A Dimensions Width: 80 cm Height: 207 cm Depth: 120 cm

FERMENTATIONSMASCHINE. - GEBRAUCHTE FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE DIMENSIONEN:: H: 166 CM DURCHMESSER: 105 CM

used fermentation room for a Stikkenwagen including air conditioner for bakery, bakery branch and small bakeries. The proofing cabinet is easy to set up and disassemble if necessary as it is built with sandwich panels. High-voltage connection and water connection are available. The door is with exposed glass and large door handle. We have 6 pieces of these closets in stock. More details and pictures on request. for 1 Stikkenwagen 380 volts Stainless steel door Quail / Kunze Sandwich Panels External dimensions 90x140x240cm WxDxH Door entrance height 202 cm

Used fully automatic proofing machine LILLNORD, Type: Topline -As good as new- - for 2 rack trolleys 60 x 80 cm - Computer control TSC2002 - including delivery - Installation on request - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.

FERMENTATIONSMASCHINE - GEBRAUCHTE H: 190CM DURCHMESSER: 125 CM FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE

Miwe fully automatic proofing machine Type: GVA 22LDS Year of construction 2015 for 4x 60x80cm racks or 8x 60x40cm freezer trolley Stainless steel cladding inside and out Total 10kW Coolant: R744 with floor with drive-up car with stainless steel ram protection inside 400/230V 3/N/PE 50Hz Touch control with compressor / fan on top The GVA was connected to a large composite system! Dimensions outside: Height: 265cm, Width: 180cm, Depth: 205cm Internal dimensions: 140x180cm W/D

Fully automatic proofing machine Miwe GVA 22LDS -Fully automatic proofing machine in black by Miwe -Model GVA 22LDS -for 4 rack trolleys -Year of construction 2015 -400/230V 3/N//PE -without cooling compressor / compressor -Outer dimensions approx.: Width: 180cm Depth: 200cm Height: 265cm

WACHTEL fermentation interrupter - for 3 rack trolleys - Octopus control - Dismantling and loading included Further data on request.

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Wooden planks/lintel boxes, 580 x 380 x 40 mm

Proofer Hein GR255-122 Proofer Space for 3 racks or a bread trolley Width 1.22m Height 2m with superstructure 2.3m Depth: 2.55m Manufacturer: HEIN Type: GR255-122 Year of construction: 09-2016 complete with proofing chamber air conditioner

Plastic crates, pizza parlors/bun trays, plastic box, plastic crate used Insert without cloth Size 60x40 H4cm, Color: white, Finish bottom to and sides with holes 6,250 Units in Stock - Bakery condition not cleaned

Proofing Delay Cabinet Debag Tefi 400B for max. 20 trays 600 x 400 mm fully assembled, Aggregate standard, top mounted Temperature from -10° to + 40°C max. Humidity up to 90% for the best dough shaping Computer control Interior and exterior walls made of stainless steel Connection 230V, 1.2 KW, ready to plug in DGUV V3 tested Dimensions: 792 x 715 x 2120 mm, WxDxH Used Device / Demo Device with 6 months warranty More bakery machines in stock!

Fermentation Delay Cabinet Blue Moon for 24 trays 600 x 800 mm at a distance of 63 mm fully assembled, Power unit standard, top mounted Temperature from -15° to + 40°C max. Humidity up to 90% for the best dough flow Computer control Interior and exterior walls made of PVC Connection 230V, 1.3 KW, ready to plug in DGUV V3 tested Dimensions: 760 x 1090 x 2325 mm, WxDxH NEW device 12 months warranty Optional: Interior and exterior walls made of stainless steel Aggregate external Maintenance contract Service Package More TOP proofers in stock!

Used proofing interrupter HEIN, type: Topline -In bakery condition- - new refrigerant 2022 - in operation until the end - Sale by closing the bakery - Plant still assembled Viewing possible.

Proofing Delay / Fermentation Interrupter Cabinet Model : AFJ 46 1C1P BMoon VLink for 20 trays 600 x 400 mm Power unit standard, top mounted Temperature from -15 to + 40C max. (at max. 43C room temperature) Humidity up to 90% for the best dough flow Computer control Refrigerant R 448A Floor-standing mobile Interior and exterior walls made of PVC Connection 230V, 1 KW, ready to plug in DGUV V3 tested Dimensions: 560 x 880 x 2055 mm, WxDxH NEW device with 12 months warranty + spare parts service Optional: Interior and exterior walls made of stainless steel Aggregate external Maintenance contract Service Package E-Box Instruction & Commissioning Leasing & Rental Service We have more proofing interrupters in stock!

2 pieces HEIN fully automatic proofers, type: TopLine -as good as new- - incl. 2 trolleys, front axle, 20 cushions, 80 x 60 cm - incl. 2 trolleys, front axle, 19 cushions, 80 x 60 cm The 2 proofers are in very good condition. Sold due to closure. Hardly been in use. More pictures and information on request.

Applikon Pilot System 50L fermentation system Stainless, 50L pilot fermentation system

Air conditioner – "The ideal solution for climate control in proofers and prepared rooms." Features: - Energy-saving - Easy installation and operation - Device dimensions W x D x H: 425 mm x 205 mm x 1650 mm - Temperature and humidity adjustable - For fermentation rooms up to 12 m³ - Plug-in free-standing device Connection 400V, 16A-CEE plug New device with warranty + spare parts service

Miwe GR Proofing Cabinet Proofing Room for 4 Rack Cars Sheet Metal Trolley - Miwe fermentation room - Suitable for 4 trolleys each 60x80cm or 2 puller trolleys - With Miwe FP control External dimensions approx.: 163cm wide 245cm deep 258cm high The fermentation is dismantled immediately Available in the warehouse in 33647 Bielefeld.

Features Volume 20800 L Material V2A (AISI 304) 1.4301 Horizontal design Length 3550 mm Cylinder length 2180 mm Front diameter 2990 mm Rear diameter 2900 mm Surface inside 2B=IIIC ground Surface marbled on the outside Operating pressure 3 bar Operating temperature range 20° C Description Tank crest: Clapper bottom curved bottom Pressure relief valve Light connection 2x flange connection with cover at the back and front DN 200 Front: Manhole oval 410x310 mm Manhole round DN400 with disc valve DN 100 Tasting tap Dip shaft sleeve with temperature display analog Clarification drain with ball valve DN 50 Flange connection for sight glass DN 200

- Fully automatic proofing cabinet for trays - Manufacturer: Gram (Bäkoline) - Type: GA 86 CCG L - Cooling, freezing, heating - With support rails - for 60x40cm trays and also 60x80cm trays - Year of construction: 2021 - Refrigerant: R290 - 230 Volt/ 50Hz 1778W - External dimensions: 238x82x106.5cm HxWxD - Interior dimensions: 147.2x67.8x86.5cm HxWxD - Temperature range: -25 °C to +40°C - Cooling capacity: 882W at -25°C - Weight: 178.6 kg

Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 1000l, level indicator: available. An on-site inspection is possible.

Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 330l, level indicator: available. An on-site inspection is possible.

 Proofing belt support tilting planks Bakery Combi Manufacturer : Ringoplast Type : Bakery Combi Dimensions : 580x390x48 mmInterior dimensions : 567x377x45 mmMaterial : PolypropyleneWeight : 950 gSee pictureShipping costs please ask

with automatic emptyingStandard descriptionFERMENTATION ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying

Standard descriptionPROOFING ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying of the

Fermentation belt carrier tilting planks with trolley32 pieces tipping planks with trolleyManufacturer: RingoplastType: Baked goods CombiDimensions: 580x390x48 mmInner dimensions: 567x377x45 mmMaterial: PolypropyleneWeight: 950 gWe have several in stockShipping costs please ask for details see picture

Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...

Cell Culture Bioreactor System / Fermentation System Make: Applikon Type Pilot Scale PS 30 consisting of: Applicon 30 liter bioreactor type PS 30L made of stainless steel 316L electropolished Suitable for families - Product chamber 3 bar / vacuum - Double jacket 6 bar/vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, control cabinet, etc. - Mounted on a frame and mobile - cGMP standard Extensive documentation

Cell Cultures Bioreactor System / Fermentation System Make: Applikon Type Pilotscale PS 130 consisting of: 1. Applicon 130 liter bioreactor type PS 130L in stainless steel 316L electropolished Suitable for Mamilia - Product room 3 bar / vacuum - Double jacket 6 bar / vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, electrical cabinet, etc. - Mounted on frame and mobile - cGMP standard

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: coolable tank, Volume: 21798 l, Working pressure: 0,1 bar, Width: 2,95 m, Height: 4,2 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet DN50, manhole

These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...

Cylindroconical fermentation and storage tank - Ammonia or glycol cooled, 1 x cone cooling, 3 x frame cooling. - Swivelling cone - Stainless steel - insulated - Standing frame, short - Cleaning air fitting with safety valve - Vacuum valve, Additional title: Outdoor tank for storing fluids, Capacity: 964 hl, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; temperature measurement

Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling. - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 7 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks., Additional title: vertical, coolable, insulated stainless steel tanks, Gross volume: 30200 l , Pressure capacity: 0,99 bar, Max. operating temperature: 40 °C, Cooling area: 14,45 m², Length: 2,83 m, Width: 2,83 m, Height: 7,86 m, Weight: 3150 kg, Material: stainless steel, Position: standing frame, Features: insulation, tank fittings

5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Additional title: coolable tank, Capacity approx.: 116 hl, Width: approx. 2,3 m, Height: approx. 4,1 m, Position: vertical, Base construction: on 4 feets, Features: manhole; cooling jackets; spunging apparatus; sampling valve

Additional title: 3 coolable tanks, Capacity: 205 hl , Operating pressure: 0,3 bar, Width: approx. 2,80 m, Height: approx. 4,20 m, Position: Vertical, Base construction: on feet, Features: manhole; cooling jackets; spunging apparatus; sampling valve

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: coolable tank, Volume: 21797 l, Width: 2,95 m, Height: 4,1 m, Weight: 2000 kg, Material: stainless steel, uninsulated, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet, manhole, DN50