129,235 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
number of controlled axis: - workpiece weight: - kg throat: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: Unbkt kg throat: bis 8000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.
Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet ...
M. No.: 2069056 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlap ...
Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland
Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.
AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134
FEELER VMP 32 CNC vertical machining center was built in 2012 in Taiwan. This versatile machine with extensive machining capabilities is specially designed for precision machining of heavy workpieces weighing up to 800 kg. To achieve excellent precision and accuracy in machining process, reliable components in the form of the spindle and cutting tools taken from the 22-position tool magazine are utilised. In addition, movement of the X,Y,Z axes is performed on ground rolling guideways, resulting in excellent dynamics and feed repeatability. All machining parameters are programmed in an intuitive CNC control from the renowned company FANUC. The FEELER milling center weighs 5800 kg. Technical data of the FEELER VMP 32 CNC milling machine - CNC controller: FANUC Series 0i-MD - feed in the X/Y/Z axis: 820/520/505 mm - rapid traverse in the X/Y/Z axis: 40/40/30 m/min - work table surfa ...
This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine.
This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine.
Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...
Stock number: 3914 PROCESSING Manufacturer: FEELER, Type: FV 800A Machines NO.: VG806, Year of manufacture: 1999 Specifications: Table size 950x425 mm Large table load 500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 450 mm Vertical movement (Z) 505 mm Spindle Taper 40 ISO Spindle speeds 6000 rpm Total power 5.5 kW Tool changer 24 places Rapid traverse X/Y/Z 18/18/15 m/min Control Mitsubishi Meldas 500 Fabr. Controlled in axes 3 Accessories: Cooling water system. Machinery vise. Tool holders pcs Operating instructions Length: 3060mm, Height: 2735mm, Width: 2300mm, Weight: 4100Kg
Key data: 1100 mm, 610 mm, 600 mm
Machine Details Stock-No. 1105-04045 Type of machine Machining Center - Vertical Make FEELER Type VMP 45A Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details X-Travel 1100 mm Y-Travel 610 mm Z-Travel 600 mm tool taper BT 40 spindle drive 18.5 kW spindle turning speed range 60 - 10000 rpm tool change unit 30-fold BT 40 tool changing time 4 sec table-size 1200 x 600 mm table load capacity - central/maximum 1100 kp Rapid Travel X/Y/Z 24 m/min feeds x/y/z -stepless 20000 mm/min total power requirement 40 kVA weight of the machine approx. 8 t Additional information CNC control HEIDENHAIN TNC 530 I HSCI MACHINE LIKE NEW complete covering, A.T.C. for 30 tools BT 40 COOLING TROUGHT THE SPINDEL 20 BARS TABLE 1200 X 600 18 KW 10000 RPM
CNC lathe Type: FTC 350 XLS Manufacturer: Feeler Year: 2014 Control: Fanuc Turning diam. above the bed: 630 mm Max.turning diameter: 350 mm Max.turning length: 870 mm Chip conveyor Toolholders Machine in good condition, under power. Find more here - / Contact us at -
AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
General SKU412W1298 LocationBarneveld MakeHethon Type62 S ZR No.0951 Main Features MaterialStainless steel Motor0.25 KW Specified Features - Metering screw MaterialStainless steel 1.4552 Metering screws Metering screwcheck Screw diameter41 mm Pitch45 mm Screw length570 mm With hoppercheck Flex-wall hopper Capacity300 l Hopper sizes600 x 600 x 930 mm Inlet600 x 600 mm Outlet⌀ 41 mm With motorcheck (0.25kW, 220-240 V, 114-137 rpm) Screw speed9-11 rpm Information Year of construction1999 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1.20 x 0.6 m Total height1.27 m Weight200 Extra Specificationswith 2 extra screws: 1x 38 mm pitch, ⌀ 42 mm : 1x 53 mm pitch, :⌀ 59 mm PTFE hopper Metering screwsHethon FeederDosing units > Metering screwsBrand > Hethon Feeder What you can expect from Foeth: -- Machine is in working condition - ...
2x feeder units for the printing of envelopes. Includes CD and manual. Available immediately and in very good condition.
This vertical machining centre FEELER FV-800A was manufactured in 1995 and is equipped with a Mitsubishi Meldas 520AMR control system. The machine features a 20-position tool magazine. Consider the opportunity to buy this machine. Contact us for further details.
Introducing the CNC Machining Center with FANUC Control System, designed for precision and efficiency in industrial applications. This machine features an extensive axis travel of 1700 mm (X-axis), 750 mm (Y-axis), and 700 mm (Z-axis), accommodating a wide variety of machining tasks. The robust spindle operates at 12,000 rpm, ensuring high-speed performance with a BT50 tool holder and a 24-slot tool magazine for versatility and reduced downtime. The large worktable supports complex operations, and the included 4th axis enhances multi-dimensional machining capabilities. This equipment is maintained in excellent condition, ready to meet the demands of modern manufacturing environments. Available now for immediate shipping to enhance your production facility.
x-travel:1000 mm y-travel:610 mm z-travel:600 mm table-size:1150 x 600 mm table load capacity:1000 kg rapid traverse X- and Y-axis:24 m/min rapid traverse Z-axis:24 m/min spindle taper::SK 40 spindle turning speed range:10.000 1/min spindle drive:15/22,5 kW tool change unit:30 Pos. CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mm weight of the machine ca.:7 t dimensions of the machine ca.:3,2 x 2,2 x 2,7 m vertical machining center, - internal coolant supply 30 bar - chipconveyor - cartridge filter - flat tracks - el. handwheel - prepared for 4th axis - 3D touchprobe RENISHAW OMP 60 - indirect measuring system - accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray) approx. 6.000h "spindle on"
General SKU391T1168 MakeJöst LocationBarneveld TypeRUF Main Features MaterialStainless steel Length1320 mm Width250 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter250 mm Feeder length1320 mm Closedcheck With hoppercheck InletDia. 265 mm OutletDia. 190 mm With vibro motorcheck With motor 0,40 kW, 400 volt, (2x) Without controlscheck Information No.0871679 Year of construction2008 Mounted on framecheck Floorspace1,40x1,05 m Total height1,4 m Weight230 kg ATEX compatiblecheckVibro feedersFeed additivesSugarAnimal feedOther feedMinerals & inorganicPowdered foodsJöstConveying systems > Vibro feedersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Chemical > Minerals & inorganicIndustries > Foo ...
General SKU427W1353 MakeAviteq TypeR800/2 19EUVDX4 No.10301400001 Year of construction2010 LocationBarneveld Main Features MaterialStainless steel Length1000 mm Width200 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width400 mm Feeder diameter200 mm Feeder length1000 mm Feeder height750 mm Closedcheck InletDia. 215 mm OutletDia. 170 mm With vibro motor2 x 0,30 kW,(380-415 volt, 1500 rpm, (Ex)) MaterialStainless steel 1.4301 (304) Information Floorspace1,1 x 0,7 m Total height0,75 m Weight90 kg CEcheckVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU201K009 MakeStiletto Triltechniek Amsterdam TypeVR90-50 No.0970-2 Year of construction2007 Mounted on framecheck Main Features MaterialStainless steel Length1750 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feeder(1x) Feeder width400mm Feeder length1750mm Feeder height140mm With vibro motorcheck400Volt, 3000rpm Information LocationBarneveld Floorspace2,2x0,7m Total height0,9m CEcheckVibro feedersStiletto AmsterConveying systems > Vibro feedersBrand > Stiletto Amster What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU079B444 MakeAviteq Vibrationstechnik TypeOA-1150/350-UVB No.6300095-001 Mounted on framecheck Specified Features - Vibro feeder Material finishPolished inside Main Features MaterialStainless steel Length1150 mm Width350 mm Vibro feeders MaterialStainless steel Vibro feeder(1x) Feeder width350mm Feeder length1150mm Feeder height275mm Closedcheck Inlet355x355mm With motor0,3 KW, 230/400 Volt (2x) Information LocationBarneveld Floorspace1,8x0,9 M Total height1,0 M Weight380 KGVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Envelope feeder PGF Maxi Feeder; cleaned and tested; minimum. Format 100x105mm, max. 450x500mm; motorized height-adjustable; suitable for various machines. Envelope Feeder PGF Maxi Feeder; cleaned and checked; min.size 100x105mm, max.450x500mm; adjustable hight by motor; used for different machines.
General SKU231U213 LocationBarneveld MakeSchenck TypeMechaTron No.V061565B01 Year of construction2007 Main Features MaterialStainless steel Length570 mm Width115 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder width115 mm Feeder length570 mm Feeder height55 mm Closedcheck With hoppercheck (380 Ltr.) InletDN150, DN200 OutletDN150 With vibro motorcheck (JVM type: JD 40) Without controlscheck Information Total height1.6 m Weight170 kg CEcheck Floorspace0.8x0.7 mVibro feedersSchenckConveying systems > Vibro feedersBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU274U478 MakeVib Tech GmbH TypeSO 406/2020-UA No.1101002-01 Year of construction09-2010 Mounted on framecheck Main Features MaterialStainless steel Length2350 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter400mm Feeder length2350mm Closedcheck InletDia:250mm OutletDia: 175mm With vibro motorcheck With motor0,6kW,230/400Volt, 955rpm(EX) Without controlscheck MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace2,55x1,15m Total height1,2m Weight540kg CEcheck ATEX compatiblecheck Extra Specificationsthis vibrating feeder is equipped with CIP cleaning Vibro feedersVib TechConveying systems > Vibro feedersBrand > Vib Tech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
General SKU259P363 MakeScan-Vibro A/S (DEN) TypeTRK 600x300x2000 No.27511 Year of construction1997 Mounted on framecheck Main Features MaterialStainless steel Length2000 mm Width600 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width600mm Feeder length2000 Feeder height300mm Closedcheck Inletdia.200mm Outletdia.200mm, dia.100mm With vibro motor(2x) 0,5KW, 400 Volt (Ex) Information LocationBarneveld Floorspace3,0x1,0 M Total height2,5 M Weight615 KG ATEX compatiblecheck Extra Specificationswith sieve 0.315x0.135 t = 0.2, with (3x) inspection hatch, Capacity 100 kg / h (p = 3.5 Kg / dm3) The bed is jacketed for cooling purposes Vibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...
General SKU223S097 MakeK.F. Alliance Eng. Limited (UK) LocationBarneveld CEcheck TypeSH Main Features MaterialStainless steel Length2300 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400mm Feeder length2300mm Feeder height130mm Closedcheck Inletdia. 240mm (3x) dia. 200mm (1x) Outletdia. 240mm With motor1.5 kW 230/400 Volt Information No.8868 Year of construction2002 Mounted on framecheck Floorspace3,1x0,8 M Total height1,8 M Weight1200 KgVibro feedersKF Alliance Engineering Ltd.Conveying systems > Vibro feedersBrand > KF Alliance Engineering Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...
General SKU022G083 MakeJöst Dülmen TypeRUF No.0670568 Year of construction2006 Mounted on framecheck Main Features MaterialStainless steel Length2300 mm Width260 mm Specified Features - Vibro feeder MaterialStainless steel 1.4541 (321) Vibro feeder(1x) Feeder diameter260mm Feeder length2300mm Closedcheck Inletdia. 250mm Outletdia. 145mm With motor0,65 KW, 380-440 Volt (2x) Information LocationBarneveld Floorspace2,5x1,0 M Total height1,9 M Weight500 KGVibro feedersJöstConveying systems > Vibro feedersBrand > Jöst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Part No.: 950 024 014-02 Ser. No.: 706DGY00306 Counter: 220,000 sheets Sheet length up to 72 cm Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supports print service providers who need a high-volume feeding solution to handle a wide range of different sheet sizes and banner media with excellent application flexibility.
General SKU274U477 LocationBarneveld MakeVib Tech TypeSO 219/2500-UA Year of constructionunknown Main Features MaterialStainless steel Length2950 mm Width200 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter200 mm Feeder length2950 mm Closedcheck Inlet640x330 mm Outletdia. 180 mm With vibro motor0,4 kW, 230/400 Volt, 1460rpm (2x) Information Mounted on framecheck Floorspace2,8x0,8 m Total height1,8 m Weight600 kgVibro feedersVib TechConveying systems > Vibro feedersBrand > Vib Tech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU321U756 LocationBarneveld MakeScan Vibro TypeTRS 300x1019 No.37943 3 Year of construction2007 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel 1.4404 (316L) Vibro feedercheck Feeder diameter300 Feeder length1019 Closedcheck InletDia: 250 mm OutletDia: 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) Information Mounted on framecheck Total height1,33 m Weight230kg CEcheck Floorspace1,7x0,63 m ATEX compatiblecheck Extra Specificationscapacity. 12 ton/hVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...
General SKU321U754 LocationBarneveld MakeGea Scan Vibro TypeTRS 300x1019 No.37943 1 Year of construction2007 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel 1.4404 (316L) Vibro feedercheck Feeder diameter300 Feeder length1019 Closedcheck InletDia. 250 mm OutletDia. 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) Information Mounted on framecheck Total height1,33 m Weight230kg CEcheck Floorspace1,7x0,63 m ATEX compatiblecheck Extra Specificationscapacity. 12 ton/hVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...
General SKU321U755 LocationBarneveld MakeScan Vibro TypeTRS 300x1019 No.37943 2 Year of construction2007 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel 1.4404 (316L) Vibro feedercheck Feeder diameter300 mm Feeder length1019 mm Closedcheck InletDia: 250 mm OutletDia: 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) Information Mounted on framecheck Total height1,33 m Weight230kg CEcheck Floorspace1,7x0,63 m ATEX compatiblecheck Extra Specificationscapacity. 12 ton/hVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...
General SKU316W1182 LocationBarneveld MakeHaver & Boecke TypeUFR 219X2900 No.23/191770/02 Year of construction2002 Main Features MaterialStainless steel Length2900 mm Width219 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter219 mm Feeder length2900 mm Closedcheck InletDia. 150 mm OutletDia. 215 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm Information Floorspace2,85x0,65 m Total height0,80 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU316W1181 LocationBarneveld MakeHaver & Boecke TypeUFR 219X2350 No.23/191770/03 Year of construction2002 Main Features MaterialStainless steel Length2350 mm Width219 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter219 mm Feeder length2300 mm Closedcheck InletDia. 150 mm OutletDia. 200 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm Information Floorspace2,30x0,60 m Total height0,85 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU319U745 LocationBarneveld MakeAEG vibrationstechnik TypeGA1712/3240-EY No.B60217 Year of constructionunknown Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck Information Total height1,1m Weight750kg Floorspace2x0,7mVibro feedersAEG VibrationstConveying systems > Vibro feedersBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU319U743 LocationBarneveld MakeAviteQ vibrationtechnik TypeR1665/219-E MVD50-4-01 No.7304481-002 Year of construction2006 Main Features MaterialStainless steel Length1960 mm Width210 mm Specified Features - Vibro feeder MaterialStainless steel 1.4552 Vibro feedercheck Feeder diameter210mm Feeder length1960mm Closedcheck InletDia:200mm OutletDia:200mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck Information Total height0,9m Weight170kg Floorspace2,3x0,5m ATEX compatiblecheckVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU265T574 LocationBarneveld MakeSCAN VIBRO TypeTRS No.41024 Year of construction2010 Main Features MaterialStainless steel Length2800 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder diameterDia: 250 mm Feeder length2800 mm Closedcheck InletDia: 200 mm OutletDia : 200 mm With vibro motor2x scan-vibro 0,20 kW, 230/400 Volt, 980 rpm Without controlscheck Information Total height1,2 m Weight200 kg Floorspace3x0,4 mVibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU250X205 LocationBarneveld MakeAviteq TypeKF12-2 No.7300171 001 Year of construction2007 Main Features MaterialStainless steel Length750 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400 mm Feeder length750 mm Opencheck With hoppercheck InletDia. 500 mm Outlet400 mm With vibro motorcheck With motor230 volt, 3000 rpm Information Mounted on framecheck With switchcheck Weight160 kg CEcheck Floorspace1,00x0,80 m Total height1,44 mVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU250X206 LocationBarneveld MakeAviteq TypeKF12-2 No.13302484 001 Year of construction2013 Main Features MaterialStainless steel Length750 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400 mm Feeder length750 mm Opencheck With hoppercheck InletDia. 500 mm Outlet400 mm With vibro motorcheck With motor230 volt, 3000 rpm With frequency controllercheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight80 kg CEcheck Floorspace1,00x0,80 m Total height2,50 mVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...
General SKU271X309 LocationBarneveld MakeNewWeight TypeE234A Mach.No.13.1202-1 Main Features MaterialStainless steel Length1900 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder width300 mm Feeder length1900 mm Closedcheck With hoppercheck 540x550x450 mm Inlet280x130 mm OutletDia. 210 mm With unbalance drivecheck (3x) With motorcheck 230 volt With frequency controllercheck Information Year of construction2014 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Total height3,0 m CEcheck Floorspace2,0 x 2,40 m Weight485 kgVibro feedersNewweighConveying systems > Vibro feedersBrand > Newweigh What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...
General SKU319U744 MakeAEG Vibrationtechnik LocationBarneveld TypeGA1712/3240-Y Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck 380Volt, 6,2A Without controlscheck Information No.B602.18 Year of constructionunknown Floorspace2x0,7m Total height1,1m Weight750kgVibro feedersAEG VibrationstConveying systems > Vibro feedersBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU312X499 MakeVibra TypeFRU 10/2-0/ER No.55317001 Year of construction2013 Mounted on framecheck Main Features MaterialStainless steel Length1100 mm Width200 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width200 mm Feeder length1100 mm Closedcheck InletDN200 OutletDN200 With vibro magnetcheck Information LocationBarneveld Floorspace1,20x0,30 m Total height0,50 m Weight70 kg CEcheck Extra SpecificationsStroke max 1,5 mm, frequency 50 s1 :Vibro feedersVibraConveying systems > Vibro feedersBrand > Vibra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU312X494 MakeVibra LocationBarneveld CEcheck TypeFRU 10/2-0-ER Main Features MaterialStainless steel Length1100 mm Width200 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width200 mm Feeder length1100 mm Closedcheck InletDN200 OutletDN200 With vibro magnetcheck Information No.53914.001 Year of construction2011 Mounted on framecheck Floorspace1,25x0,30 m Total height0,50 m Weight70 kg Extra SpecificationsStroke 1,5 mm, frequency 50 s1 :Vibro feedersVibraConveying systems > Vibro feedersBrand > Vibra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU239T281 MakeApplied Vibration Limited (UK) No.AV11212/13-2 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Length2900 mm Width740 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width740 mm Feeder length2900 mm Closedcheck Inletdia. 390 mm Outletdia. 300 mm, dia. 490 mm With vibro motorcheck (2x) With motor2,2 kW 230/400 Volt MaterialStainless steel Information Total height1,3 m Weight1090 kgVibro feedersApplied Vibration LimitedConveying systems > Vibro feedersBrand > Applied Vibration Limited What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
maximum number of results exceeded
please refine your search
